Distilling & Brewing Kits

Our largest home brewery, built around the Grainfather G70 with two conical fermenters. Everything here is something we sell on its own, bundled so you’re not standing in the aisle wondering what you’ve forgotten.

What’s in the kit

• Grainfather G70 complete all grain system
• Grainfather sparge water heater, 40 L
• 2 x Grainfather GF30 stainless steel conical fermenters
• KegLand Series X kegerator with 2 taps and CO2 regulator
• 2 x 19 L Mangrove Jack’s beer kegs
• Stainless steel mash paddle, 61 cm
• Stellarsan no-rinse sanitiser, 500 ml

Not included

• Your malt, hops and yeast. Build a recipe in our grain bill builder and we’ll weigh and mill it to order in store.
• CO2 gas. Swap and go bottles are available in store.

How it works

1. Build your recipe and get your grain milled.
2. Mash and boil in the Grainfather, following the instructions.
3. Chill and transfer the wort to your fermenter.
4. Ferment with your yeast, following the directions on the pack.
5. Keg and carbonate, then pour from your own taps.

Good to know

Some items in this kit may be on order, so delivery can take longer. Get in touch and we’ll confirm timing.

New to it? Pop into Laverton North or Epping and we’ll walk you through it.

A bigger brewery for bigger brew days, built around the Grainfather G40. Everything here is something we sell on its own, bundled so you’re not standing in the aisle wondering what you’ve forgotten.

What’s in the kit

• Grainfather G40 Complete Mash Boiler
• Grainfather sparge water heater, 40 L
• Grainfather GF30 stainless steel conical fermenter
• KegLand Series X kegerator with 2 taps and CO2 regulator
• 2 x 19 L Mangrove Jack’s beer kegs
• Stainless steel mash paddle, 61 cm
• Stellarsan no-rinse sanitiser, 500 ml

Not included

• Your malt, hops and yeast. Build a recipe in our grain bill builder and we’ll weigh and mill it to order in store.
• CO2 gas. Swap and go bottles are available in store.

How it works

1. Build your recipe and get your grain milled.
2. Mash and boil in the Grainfather, following the instructions.
3. Chill and transfer the wort to your fermenter.
4. Ferment with your yeast, following the directions on the pack.
5. Keg and carbonate, then pour from your own taps.

Good to know

Some items in this kit may be on order, so delivery can take longer. Get in touch and we’ll confirm timing.

New to it? Pop into Laverton North or Epping and we’ll walk you through it.

Our G30 home brewery with a step up in the fermenter. The stainless GF30 conical takes the place of the Apollo. Everything here is something we sell on its own, bundled so you’re not standing in the aisle wondering what you’ve forgotten.

What’s in the kit

• Grainfather G30v3 with counterflow chiller
• Grainfather sparge water heater, 18 L
• Grainfather GF30 stainless steel conical fermenter
• KegLand Series X kegerator with 2 taps and CO2 regulator
• 2 x 19 L Mangrove Jack’s beer kegs
• Stainless steel mash paddle, 61 cm
• Stellarsan no-rinse sanitiser, 500 ml

Not included

• Your malt, hops and yeast. Build a recipe in our grain bill builder and we’ll weigh and mill it to order in store.
• CO2 gas. Swap and go bottles are available in store.

How it works

1. Build your recipe and get your grain milled.
2. Mash and boil in the Grainfather, following the instructions.
3. Chill and transfer the wort to your fermenter.
4. Ferment with your yeast, following the directions on the pack.
5. Keg and carbonate, then pour from your own taps.

Good to know

Some items in this kit may be on order, so delivery can take longer. Get in touch and we’ll confirm timing.

New to it? Pop into Laverton North or Epping and we’ll walk you through it.

A complete home brewery, from the mash to the tap. Everything here is something we sell on its own, bundled so you’re not standing in the aisle wondering what you’ve forgotten.

What’s in the kit

• Grainfather G30v3 with counterflow chiller
• Grainfather sparge water heater, 18 L
• Apollo 30 L Snub Nose pressure fermenter
• KegLand Series X kegerator with 2 taps and CO2 regulator
• 2 x 19 L Mangrove Jack’s beer kegs
• Stainless steel mash paddle, 61 cm
• Stellarsan no-rinse sanitiser, 500 ml

Not included

• Your malt, hops and yeast. Build a recipe in our grain bill builder and we’ll weigh and mill it to order in store.
• CO2 gas. Swap and go bottles are available in store.

How it works

1. Build your recipe and get your grain milled.
2. Mash and boil in the Grainfather, following the instructions.
3. Chill and transfer the wort to your fermenter.
4. Ferment with your yeast, following the directions on the pack.
5. Keg and carbonate, then pour from your own taps.

Good to know

Some items in this kit may be on order, so delivery can take longer. Get in touch and we’ll confirm timing.

New to it? Pop into Laverton North or Epping and we’ll walk you through it.

Put your own beer on tap. A proper standing keg fridge with two taps and two kegs ready to fill. Everything here is something we sell on its own, bundled so you’re not standing in the aisle wondering what you’ve forgotten.

What’s in the kit

• KegLand Series X kegerator with 2 taps and CO2 regulator
• 2 x 19 L Mangrove Jack’s beer kegs

Not included

• CO2 gas. Swap and go bottles are available in store.
• Your beer

How it works

1. Clean and sanitise your kegs.
2. Fill your kegs and load them into the fridge.
3. Connect the gas and carbonate your beer.
4. Pour.

Good to know

Some items in this kit may be on order, so delivery can take longer. Get in touch and we’ll confirm timing.

New to it? Pop into Laverton North or Epping and we’ll walk you through it.

From the mash to the bottle. The Grainfather G30 and a pressure fermenter, with everything you need to bottle your beer. Everything here is something we sell on its own, bundled so you’re not standing in the aisle wondering what you’ve forgotten.

What’s in the kit

• Grainfather Complete G30 all grain system with counterflow chiller
• Apollo 30 L Snub Nose pressure fermenter
• Stainless steel mash paddle, 61 cm
• Stellarsan no-rinse sanitiser, 500 ml
• 24 x 660 ml amber beer bottles
• OMAC Bench Capper Napoli 2 for 26 mm crown caps
• Gold 26 mm crown caps, 100 pack
• Gravity bottle filler with foot valve

Not included

• Your malt, hops and yeast. Build a recipe in our grain bill builder and we’ll weigh and mill it to order in store.

How it works

1. Build your recipe and get your grain milled.
2. Mash and boil in the Grainfather, following the instructions.
3. Chill and transfer the wort to your fermenter.
4. Ferment with your yeast, following the directions on the pack.
5. Bottle and cap, then condition before you open one.

New to it? Pop into Laverton North or Epping and we’ll walk you through it.

Brew full grain beer from scratch. This kit pairs the Grainfather G30 with a pressure fermenter and the brew day basics. Everything here is something we sell on its own, bundled so you’re not standing in the aisle wondering what you’ve forgotten.

What’s in the kit

• Grainfather Complete G30 all grain system with counterflow chiller
• Apollo 30 L Snub Nose pressure fermenter
• Stainless steel mash paddle, 61 cm
• Stellarsan no-rinse sanitiser, 500 ml

Not included

• Your malt, hops and yeast. Build a recipe in our grain bill builder and we’ll weigh and mill it to order in store.
• Bottles or kegs for the finished beer

How it works

1. Build your recipe and get your grain milled.
2. Mash and boil in the Grainfather, following the instructions.
3. Chill and transfer the wort to your fermenter.
4. Ferment with your yeast, following the directions on the pack.
5. Package into bottles or kegs when it’s ready.

New to it? Pop into Laverton North or Epping and we’ll walk you through it.

Small batch gin at home with no water connection needed. The Air Still Pro is air-cooled and comes with a botanical basket, and we’ve added the botanicals and flavourings to get you started. Everything here is something we sell on its own, bundled so you’re not standing in the aisle wondering what you’ve forgotten.

What’s in the kit

• Still Spirits Air Still Pro with Botanical Basket and foreshots collection vial
• London Dry Gin botanicals
• Top Shelf Select Blue Jewel Gin flavouring
• Profiles Gin Deluxe Gin Enhancer, 50 ml

Not included

• Your wash or base spirit
• Bottles. See our spirit bottles.

How it works

1. Set up the Air Still Pro as set out in the instructions.
2. Load the basket with your botanicals.
3. Run the still, following the instructions, and discard the foreshots vial.
4. Finish and bottle. Add flavouring or enhancer to taste.

Please note: alcohol distillation and owning distilling equipment are restricted in some places, and permits or licences may be required. For guidance or advice, contact your relevant local authorities.

New to it? Pop into Laverton North or Epping and we’ll walk you through it.

The consumables for your next three batches in one order, so you don’t run out halfway through a run.

What’s in the pack

• 3 x Still Spirits Classic 8 Turbo packs, each with yeast, Turbo Carbon and Turbo Clear
• 3 x EZ Filter Carbon Cartridges

Not included

• Sugar or dextrose. Classic 8 works with 6 kg or 8 kg per batch. See our dextrose brewing sugar.
• An EZ Filter housing

Follow the directions on each pack for quantities and temperatures.

Please note: alcohol distillation and owning distilling equipment are restricted in some places, and permits or licences may be required. For guidance or advice, contact your relevant local authorities.

New to it? Pop into Laverton North or Epping and we’ll walk you through it.

Turn your clean spirit into something for the shelf. This kit covers the flavouring, the oak and the bottles, and it works with spirit from any still.

What’s in the kit

• Top Shelf Select Single Whiskey flavouring
• French oak chips, medium toast, 200 g
• 4 x 1125 ml spirit bottles with screw caps
• Alcohol hydrometer, 0 to 100%
• Hydrometer test cylinder, 270 ml

Not included

• Your base spirit

How it works

1. Check your strength with the hydrometer and test cylinder.
2. Flavour your spirit, following the directions on the sachet.
3. Oak it. Add the chips to your spirit, steep to taste, then strain them out.
4. Bottle it and give it time.

Please note: alcohol distillation and owning distilling equipment are restricted in some places, and permits or licences may be required. For guidance or advice, contact your relevant local authorities.

Everything between the fermenter and the fridge. Fill, cap and store your own beer in proper glass bottles. Everything here is something we sell on its own, bundled so you’re not standing in the aisle wondering what you’ve forgotten.

What’s in the kit

• 24 x 660 ml amber beer bottles
• OMAC Bench Capper Napoli 2 for 26 mm crown caps
• Gold 26 mm crown caps, 100 pack
• Gravity bottle filler with foot valve
• Stellarsan no-rinse sanitiser, 500 ml

Not included

• Your beer and a fermenter with a tap. The filler suits a Mangrove Jack’s 30 L barrel style fermenter.

How it works

1. Sanitise your bottles, filler and caps with Stellarsan.
2. Fill each bottle using the gravity filler.
3. Cap with the bench capper, adjusting the height to suit your bottle.
4. Condition and give it time before you open one.

New to it? Pop into Laverton North or Epping and we’ll walk you through it.

A handcrafted Italian copper alembic, bundled with glass bottles, cork stoppers and a test cylinder. It is a beautiful piece, made from food-safe copper with a hand-hammered finish.

What’s in the kit

• Italian Alembic Copper Boiler, 23 L, with detachable thermometer, alcoholmeter, serpentine cooling tank and condenser unit with copper coil
• 20 x 500 ml Euro gin bottles
• Black flat top port cork stoppers, 100 pack
• Hydrometer test cylinder, 270 ml

Good to know

The alembic is sold as a bar display ornament for a restaurant, bar or pub feature. As it holds more than 5 L, if you intend to use it for essential oil or spirit distillation you may need to explore your state laws and apply for a regional producer licence first.

Mash your own grain and run it through copper. This kit pairs the Grainfather G30 with a copper alembic dome and condenser. Everything here is something we sell on its own, bundled so you’re not standing in the aisle wondering what you’ve forgotten.

What’s in the kit

• Grainfather G30 all grain system with counterflow chiller
• Create+ Alembic Copper Dome & Condenser
• Devils Pale Distillers Malt, 25 kg
• Still Spirits Distillers Yeast Whiskey, 20 g
• Distillers Nutrients for dark spirits, 450 g
• French oak chips, medium toast, 200 g
• 30 L plastic fermenter with screw lid
• 4 x 1125 ml spirit bottles with screw caps

Not included

• Water and a tap connection for cooling

How it works

1. Mash your malt in the Grainfather and chill the wort.
2. Ferment with the whiskey yeast and nutrients, following the directions on each pack.
3. Run the still with the alembic dome fitted to the G30, as set out in the instructions.
4. Oak it. Add the French oak chips and give it time. Don’t rush this.
5. Bottle when it tastes right to you.

Please note: alcohol distillation and owning distilling equipment are restricted in some places, and permits or licences may be required. For guidance or advice, contact your relevant local authorities.

New to it? Pop into Laverton North or Epping and we’ll walk you through it.

A copper alembic pot still setup with the molasses, yeast and flavourings for making a rum with character. Everything here is something we sell on its own, bundled so you’re not standing in the aisle wondering what you’ve forgotten.

What’s in the kit

• Create+ Boiler 25 L
• Create+ Alembic Copper Dome & Condenser
• Still Spirits Pure Turbo Pack
• Bundaberg food-grade molasses, 14 kg
• Distillers Nutrients for dark spirits, 450 g
• Top Shelf Select Navy Dark Rum flavouring
• Samuel Willards Rum Soakers, 100 g
• 30 L plastic fermenter with screw lid
• 4 x 1125 ml spirit bottles with screw caps

Not included

• Water and a tap connection for cooling

How it works

1. Clean and sanitise your fermenter and gear.
2. Make your wash with the molasses, nutrients and yeast, following the directions on each pack.
3. Ferment and clear until the wash has finished and settled.
4. Run the still as set out in the alembic instructions.
5. Finish and bottle. Add your flavouring or rum soakers and give it time before bottling.

Please note: alcohol distillation and owning distilling equipment are restricted in some places, and permits or licences may be required. For guidance or advice, contact your relevant local authorities.

New to it? Pop into Laverton North or Epping and we’ll walk you through it.

A complete Still Spirits setup built around the T500 Pro, for anyone who wants a clean, neutral spirit to work with. Everything here is something we sell on its own, bundled so you’re not standing in the aisle wondering what you’ve forgotten.

What’s in the kit

• Create+ T500 Pro Column & Condenser
• Create+ Boiler 25 L
• Create+ Complete Companion Kit, including a 30 L fermenter, Turbo Pack, 6 kg Turbo Sugar, cleaner, sanitiser, hydrometer, alcometer, 5 L jug, Easy Filter System and a selection of flavourings
• Top Shelf Select Bison Plains Vodka flavouring
• 4 x 1125 ml spirit bottles with screw caps

Not included

• Water and a mains or tap connection for cooling

How it works

1. Clean and sanitise your fermenter and gear.
2. Make your wash with the sugar and Turbo Pack, following the directions on each pack.
3. Ferment and clear until the wash has finished and settled.
4. Run the still as set out in the T500 Pro instructions.
5. Filter, flavour and bottle. Use the Easy Filter System, add your flavouring and fill your bottles.

Please note: alcohol distillation and owning distilling equipment are restricted in some places, and permits or licences may be required. For guidance or advice, contact your relevant local authorities.

New to it? Pop into Laverton North or Epping and we’ll walk you through it.