Kegs With Ball Lock - Cornelius

LIQUID disconnect with MFL type threaded connector.

** Online Price Only **

LIQUID disconnect with MFL type threaded connector.

These high quality plastic disconnects are the most common homebrewer piece of equipment to attach to ball lock kegs. Our Premium Ball Locks are designed with the highest tolerances and quality control standards. The barbs are made from stainless steel not nicle coated brass like some of the other cheaper disconnects you might see on the market.

This is a gas IN disconnect with MFL thread for ball lock kegs and allows for quick disconnects.

Brand new 19L keg rated to 130psi with black rubber handles and bottom.

A flat rubber seal washer for a Cornelius keg post. It sits under the post and stops gas or beer weeping out around the thread, which is where most mystery keg leaks come from.

Cheap enough to replace whenever you pull a post off for cleaning rather than reusing a squashed one. Worth confirming your posts are Cornelius style before ordering a handful.

Code: 130427

Replacement O-Ring for ball lock or pin lock keg posts.

L__cm x W__cm x H__cm

Threaded 16 gram CO2 bulbs, four to a pack. The threaded type screws into a charger rather than being pierced, and that is the difference that catches people out when they order.

Handy for a portable setup where hauling a full cylinder around is not on. Check whether your charger takes threaded or non threaded bulbs before ordering, and ask us if you cannot tell.

These are primarily designed to be used with the 50L A-Type Spear kegs. This will allow the spear to be rotated so the spear can be removed for cleaning and servicing.

A-type keg opening tool suitable for Lion, Little Creatures Tooheys, Coopers, XXXX type kegs and many more if they do not have a locking circlip.

The beauty about this device is that it takes a 1/2inch square drive meaning you can quickly insert and remove spears with a ratchet gun/impact driver.  This is the fastest way to insert and remove spears for kegs and great for breweries that want to go into the keg and check them.

These are primarily designed to be used with the A-Type Spear kegs which do not have a tamper locking circlip.

A-type keg opening tool suitable for Lion, Little Creatures Tooheys, Coopers, XXXX type kegs and many more if they do not have a locking circlip.  You will still have to remove this locking device if that is the type of keg you are using.

This couples with the a-type spears that we sell and the a-type spears that have a hole that the tool engages with (see attached photos)

For use with MKII, MKIII & MKIV Regulators. 
Can be used with CO2 & Nitrogen Mixed gas Australian Standard Gas Bottles.
Nylon Regulator Washer and Filter not included.

A ball lock gas disconnect with a 5mm barb for Cornelius style kegs, listed under Keg King. It pairs with a liquid disconnect to get a keg pouring.

The title spells it Conelius, one of several spellings floating around the trade. Ball lock and pin lock posts are not interchangeable, so confirm which your keg uses before you order.

A clear plastic floating dip tube measuring 25 x 40mm, with a 5 to 6mm barb, listed under Keg King. The float keeps the pick up point near the top of the liquid rather than down in the sediment.

Check the barb size against your own tubing, and that it will clear the inside of your keg, before you order.

A ball lock liquid disconnect with a 5mm barb, for Cornelius style kegs. It goes onto the liquid post. Listed under Keg King.

The title spells it Connelius, which is a typo for Cornelius. Ball lock and pin lock posts do not interchange, so check which type your keg actually uses before ordering a pair.

This small mini keg is commonly used as a growler. Small enough to drink directly from the keg or pour directly from the keg into a glass. This mini keg system is ideal for use as a portable keg at parties, BBQs, or simply enjoying a few beers in the sun. The 4L size is equivalent to 12 330ml beer bottles.

Small Stainless Steel Mini Beer Kegs are designed specifically for home brewing/growler dispensing. They are best suited for small batches and people who want to fit them into standard domestic fridges.
You can naturally carbonate your beer with priming sugars, or you can force carbonate it and serve it with the ball lock lid.

Because these kegs use a flexible silicone dip tube/spear, they can be dispensed on their side or upright, so no matter what orientation is most convenient in your fridge, you can stand the keg up or lie the keg down and the dip tube will always sink and draw liquid from the bottom (as it is heavier than beer).

Unlike many other mini kegs on the market, these mini kegs use gold standard acid bath electrolysis to pacify the stainless steel, making them more rust resistant than any other mini keg on the market. These mini kegs are the ONLY mini kegs that use a unique technique to weld the kegs from the inside out. This means that we get a better welding finish that is more sanitary than any other option.

So, if you've been looking for the highest quality mini kegs money can buy, this is what you've been looking for!
The Mini Kegs also come with a neoprene jacket, compact tapping systems, and other accessories that you might find useful.

Dimensions

• 135mm x 326mm
• Add on 115mm in length if using a tapping head with a black liquid disconnect with a Duotight or 140mm if using a flow control disconnect.

The integrated duotight design means you can connect your gas line directly into the disconnect, easily and reliably - no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitising an absolute breeze!
 
Made from highly chemical resistant materials with stainless springs and ball bearings - no cheap ABS plastics here - this fitting is extremely resistant to commonly used chemicals such as phosphoric based sanitisers and caustics.
 
The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required - no need to ever have blocked poppets again when it is this easy to disassmble and clean.
 
The robust and compact design make this the best value and the best designed home brew quick disconnect ever manufactured.
 
This particular ball lock disconnect has been designed to suit 8mm Beer/Gas Line. Due to the integrated duotight fitting the line will simply push directly into this fitting.

A new 50 litre keg fitted with a CO2 type A spear. Fifty litres is commercial size, and a type A spear needs the matching coupler, so check what coupler you are running before ordering.

New rather than reconditioned, which matters if you are putting it into a venue. Have a chat with us about couplers, gas and line if you are setting up from scratch.

These high-quality plastic gas disconnects are an excellent way to protect your regulator by preventing liquid from entering the gas line. The small extra cost will save you money in the long run!
These clear/grey high quality plastic disconnects are widely used in the industry, but they now include a check valve built into the fitting.

The internal components are made of stainless steel, and the body is transparent, allowing you to see what's inside.

You can attach the following items to the MFL thread:

• Barb fitting (Swivel Nut & Barb)
• 8mm push in fitting
• Mini All In One Regulator
• Premium Mini Regulator

It is recommended that this product be used in conjunction with Duotight Push in Fittings. These fittings make joining hose really easy especially if you want to use the 4mm ID Tubing.

A machined stainless steel gas disconnect with an MFL thread, built for a long, leak free life on your keg. Solid stainless holds up to constant use far better than plastic, so it just keeps working. A quality upgrade for anyone serious about their kegging setup.

These second‑hand Ball Lock Kegs are ideal for brewers looking for a budget‑friendly option. As previously used commercial kegs, they will show visible signs of wear such as marks, dents, and general cosmetic imperfections.

Each keg has been pressure‑tested to ensure the body is structurally sound, but servicing will be required on arrival to bring it back to optimal working condition.

Custome Notice

Please note that rubber chimes and handles may come in a variety of colours, including black, red, blue, green, or yellow. Pressure relief valves may also vary, with options such as ring‑pull, manual, lever, or no PRV at all. These variations are selected at random from our large stock.

A replacement O-ring for the hatch lid of a 19 litre keg, to keep your seal tight and your beer under pressure. O-rings perish over time, so a fresh one is the easy fix for a keg that will not hold gas. A handy spare to keep your keg pouring perfectly.