Pump Fittings & Racking Plates/filters

Bravopleat BLP are cost effective pleated cartridges manufactured from polypropylene media and components. These cartridges are designed to remove bacteria, yeast, moulds and macro colloid in wine, beer, liquors and soft drinks industries.

Bravopleat BLP cartridges have an external diameter of 66 mm to be able to retrofit competitive cartridge housings.

These cartridges are suitable for Tenco tandem filter housing. Typical Bravopleat BLP applications are chemicals and water treatment.

Washable, Reusable, and available for different filtration grades, please choose from the drop-down.

A 12mm non return valve, packaged ready to go. It keeps liquid moving one way only, so your line does not drain back the moment the pump stops. Fitting orientation matters, so note the flow direction marked on the body. Confirm the 12mm size against your existing fittings before ordering, or bring the line fitting in to Laverton North or Epping and we will match it.

A grape must drain screen made in Italy, 1100mm long and 200mm in diameter, with perforated holes and handles at each end. It is a customised fitting rather than an off the shelf part, built for draining must during vintage.

Because it is made to size, check the dimensions against your vat or press before ordering and we will talk it through.

An Australian made racking spear for barrels, with a 3/4 inch, 19mm, BSPT male inlet and a 1.5 inch, 38mm, triclover on the other end. The triclover end makes it quick to break down and clean.

Sold as the spear. If you are running a different connection at the pump, tell us what it is and we will let you know whether this one suits.

A brass hosetail with a 12.5mm barb and a 19mm BSP thread, made in Italy, listed to suit the small non return valve. Brass takes repeated fitting and removal far better than plastic. Use a clamp over the barb once the hose is on. Check your valve and hose bore before ordering, or bring the parts in to Laverton North or Epping and we will match them.

A 19mm non return valve, packaged ready to fit. It holds liquid in the line when the pump stops rather than letting it drain back on you. The body will be marked for flow direction, so note which way it goes in. Check the 19mm size against your existing fittings before ordering, or bring the line fitting in and we will match it on the counter.

A stainless steel foot strainer filter for a non return valve, made in Italy. It screens debris out of the line before it reaches the valve and the pump. A few dollars against the nuisance of a blockage mid transfer. The title does not give a thread size, so if you need it to match a particular valve, send us a photo or a measurement, or bring the valve into Laverton North or Epping.

A barrel fill gun with a 19 mm hosetail on a 1 BSP female thread, in a white plastic body. The trigger gives you control at the barrel rather than running back to the pump every time, which is the entire point of one. Thread and hosetail size are the fit. Check both against your hose and fittings, or tell us what you are running and we will confirm it will connect.