Heated Boilers and Fittings

The home brew wrap around electric heater belt fits around your standard fermenter to provide steady constant warmth. To Fit. Place the heater belt around the outside of the fermenter approximately 45mm from the bottom and adjust bit it to fit by tightening the main lead via the hole in the outer end of the heater belt. Do not over tighten, twist, tie or fasten the heater belt in any other way. Connect the power supply after fitting.

Who needs a tropical fan kit?

• XL Premium Kegerator owners that live in hot climates
• XL Premium Kegerator owners that installed their kegerators where the heat can't escape easily
• XL Premium Kegerator owners that want better dispersion performance for the heat their kegerators are creating

Our new Tropical Fan Kit can greatly enhance the performance of your XL Premium kegerator especially for units running in hotter climates.

The small ducted fan installs between the bottom corner of the condensing unit and the outside back wall of the kegerator.

Connect the small power supply cable and that's it.

The fan will move heat trapped at the back of your kegerator, minimising operation of the refrigeration cycles.

Code: 127623

These flexible heat pads are manufactured from polyurethane to give water resistant properties combined with durability & flexibility. Will provide low heat for the purpose of brewing or fermenting.

Code: 127621

30W Fermenter Heating Belt easily wraps around any fermenter to help control temperatures in cold months.
Belt can simply be moved up and down the fermenter in order to control temperature.

Precision-engineered silicone gasket designed for 2-inch Triclover connections on keg boilers and brewing equipment. Features a flat ribbed surface on one side for optimal sealing performance and compatibility with standard Triclover fittings.

Durable food-grade silicone construction withstands high temperatures and repeated use. Essential component for maintaining leak-free connections in home brewing and commercial applications. Replace periodically to ensure reliable performance and prevent contamination.

These 304 Stainless 2200w Weld-Less Elements are designed to fit a 32mm Hole inside the wall of your brewing vessels or boilers. It does not come with the power cord.

Supplying power from an IEC cord allows the unit to be used in a smaller hole than if the cord was hard wired. We do recommend using a MKII - Temperature Controller (Heat & Cool) to run this element with the appropriate thermowell or temperature probe attachment.

If you are going to be using these elements directly in your mash tun, and will try to maintain temperature using the element, we would also recommend getting a power control chip 3600w to modify the power output to the element. Too higher power directly in contact with your malted grain can cause scorching/off flavours as the temperature may not be evenly distributed and isolated purely around the element itself.

Perfect heating solution for those who want more even coverage and absolute certainty that their PET fermenter will not melt even if the fermenter is empty.

FermZilla Heating Wrap Belt - With Velcro Strap (30watts)

Perfect heating solution for those who want more even coverage and absolute certainty that their PET fermenter will not melt even if the fermenter is empty.

Punching in at an ample 30 watts, this heating wrap belt is great when paired with insulation and a temperature controller box to dial in that optimum fermentation profile.

Dimensions:
1000mm x 250mm

AU Plug

A 300 watt immersible glass heater by EHEIM of Germany, for precise fermentation temperature control. German build quality means reliable, even heat to keep your ferment in the sweet spot for clean, consistent results. A quality choice for the brewer who takes temperature seriously.

A 2200W heating element rod with cable, from Kegland. A straight replacement part for a vessel already set up to take an element of this rating, sold on its own. Check the rating and fitting on your existing element before you order, and bring the old one in if you would rather we compare the two side by side.

This 240v motor has been coupled with a high torque gearbox to bring the RPM down to the perfect milling speed of 180rpm. 

Includes spider coupling with polyurethane cushion to suit 10mm and 12mm shafts as well as a safety kill switch.

Note: Grain mill and hopper NOT included.

The inner glass tube for the immersible heater. It is the sleeve the heating element sits inside, and a cracked tube means the heater should not go anywhere near your wort until it has been replaced.

Sold as a replacement accessory. Check the length and diameter against your heater before ordering, and send us a photo if you would like us to confirm the match.

Essential brewing equipment for serious home brewers and craft operations. This 90cm mixing paddle features a generous 40cm x 8cm flat face, engineered to move large volumes of liquid efficiently during mashing, lautering, and kettle work.

The bored design reduces drag and resistance, making stirring smoother and less labour-intensive. Constructed for durability in high-heat environments, it's ideal for all-grain brewing setups and commercial-scale batches. 

Code: 129331

Stainless steel elbow bend 1/2 inch BSP Male to 1/2 inch BSP Female.

A 30 watt fermenter heater wrap panel for fermenters from 60 to 200 litres, keeping your brew warm and steady when the weather turns cool. Gentle, even heat helps your yeast stay happy for a clean, reliable ferment through winter. A simple bit of kit that keeps brew day on track all year round.

The Grainfather 40 litre sparge water boiler, running on 240v at 10A so it plugs into an ordinary household outlet. It heats and holds your sparge water so it is ready the moment the mash is, which takes one job off an already busy brew day. Check you have a spare 10A outlet within reach of your bench, or come and see one at Epping.

A 2200 watt electric heating element rod from Keg King, supplied with its power cord. Sold as a replacement or spare for a setup already built to take an element of this size, so nothing else comes in the box. Confirm the element style and mounting your vessel uses before ordering, and give us a call if you want a second set of eyes on it.