	__ __
Description	Description - __
Rating	Rating - __
Vendor	Vendor - __
Color	Color - __
	View full details

Syphons, Transfer Hose & Clamps

Home > Syphons, Transfer Hose & Clamps

Racking is where a lot of good wine and beer gets ruined. Splash it about, drag the lees across with it, and months of patience go out the window. A good syphon, the right hose and a clamp that actually holds are cheap insurance.

Syphons. The Ferrari Easy Pump syphon is started by pumping rather than by mouth, and its anti-sediment tip keeps the inlet off the lees. The large and small telescopic syphons and the blow syphon start when you blow into the small tube, and the large telescopic racking tube extends up to 80 cm for deep demijohns. If you would rather not syphon at all, the Super Sucker 12 V diaphragm pump moves wine or beer between vessels side by side.

Hose and fittings. Start with the internal diameter, because everything else follows from it. Thin wall vinyl hose is fine for gravity syphoning small batches. Thick wall vinyl and the hose with polyester yarn reinforcement hold their shape under a pump and will not collapse around a corner, which matters once you are moving volume. Silicone hose from Keg King handles heat. Add a red plastic racking plate to keep the inlet off the sediment, a throttle flow stop valve so you can pause mid transfer, and a clamp to match: Tridon stainless, Tridon zinc and part stainless, the Fratelli Marchisio light worm drive at 8 to 15mm, or zinc eco clamps in packs of 20.

Buy hose a metre longer than you think you need. Every setup grows, and short hose is the thing you end up swearing at.

Come and see us at Laverton North or Epping, or browse transfer pumps, pump fittings and racking plates and demijohns.

40 products

{"id":48113814372667,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"6HOSRB-100","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Hose 100mm","public_title":null,"options":["Default Title"],"price":7500,"weight":50520,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}

The Artisans Bottega

Hose 100mm

$75.00 AUD

Unit price

Hose in 100mm diameter. This listing gives the diameter only, with no material, wall thickness or length stated on the page, so we would rather you asked than guessed. Tell us what you are pumping and how long a run you need and we will confirm the full spec and the price for your length before you order. Available through Laverton North and Epping.

Out of stock

Available for pickup at

Out of stock at

{"id":48113791598907,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"6CLAMPSC31-34Z","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Super Clamp 31-34mm","public_title":null,"options":["Default Title"],"price":900,"weight":7813970,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}

The Artisans Bottega

Super Clamp 31-34mm

$9.00 AUD

Unit price

A super clamp with a 31 to 34mm clamping range, for the smaller hose sizes. It does a firmer job than a worm drive clamp on a line that sees any pressure. Sold as one clamp. Measure the hose over the barb before you order, since the useful range here is only a few millimetres wide.

Out of stock

Available for pickup at

Out of stock at

{"id":48113787076923,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"6CLAMPSC74-79S\/","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Super Clamp 74-79mm","public_title":null,"options":["Default Title"],"price":2530,"weight":7813970,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}

The Artisans Bottega

Super Clamp 74-79mm

$25.30 AUD

Unit price

A super clamp with a 74 to 79mm clamping range, for the larger hose sizes. Built to hold against pressure rather than simply stop a hose sliding off, so it suits pump and transfer lines. Sold singly. Measure the outside diameter of the hose once it is over the barb and check it sits inside 74 to 79mm.

Low in stock

Available for pickup at

Out of stock at

{"id":48113785438523,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"6CLAMPSC44-47S\/","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Super Clamp 44-47mm","public_title":null,"options":["Default Title"],"price":1595,"weight":7813970,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}

The Artisans Bottega

Super Clamp 44-47mm

$15.95 AUD

Unit price

A super clamp with a 44 to 47mm clamping range. Heavier duty than a worm drive clamp, and it holds a hose onto a barb properly when there is pressure behind it. Sold as a single clamp. Measure the outside diameter of your hose over the barb and make sure it lands inside the 44 to 47mm range, or bring it into Epping and we will check.

Low in stock

Available for pickup at

Out of stock at

{"id":48113761878331,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"6HOSRB-25","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Hose 25mm","public_title":null,"options":["Default Title"],"price":1400,"weight":7813970,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}

The Artisans Bottega

Hose 25mm

$14.00 AUD

Unit price

A 25mm hose from our fittings and hose range. The listing gives the size and very little else, so the length, the material and whether it is food rated are all worth confirming before you order. Ring Laverton North or Epping, or send us a message telling us what you are running it on, and we will tell you exactly what is on the shelf.

Out of stock

Available for pickup at

Out of stock at

Heavy duty silicone tube ID 12.5mm OD 18mm

{"id":47779870736699,"title":"1 Unit \/ White","option1":"1 Unit","option2":"White","option3":null,"sku":"6HOSSIL12x10cm","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Hose\/Tubing Silicone ID 12.5mm hose OD18mm. Only 10 cm piece. Used for hot liquid transfer below 15psi max at burst presure 30psi - 1 Unit \/ White","public_title":"1 Unit \/ White","options":["1 Unit","White"],"price":350,"weight":260,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}

Kegland

Hose/Tubing Silicone ID 12.5mm hose OD18mm. Only 10 cm piece. Used for hot liquid transfer below 15psi max at burst presure 30psi

$3.50 AUD

Unit price

A length of heavy duty silicone tube, 12.5mm inner and 18mm outer diameter, for hot liquid transfer up to 15 psi. Food safe silicone handles heat without perishing or tainting, making it ideal around the boiler and still. Flexible, sturdy and endlessly useful in the brewery.

Out of stock

Available for pickup at

Out of stock at

NukaTap creamer 7 disc set for stout spout

{"id":47779573956923,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"NUKATAP-7DISCC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Beer NukaTap Creamer 7 discs set for stout spout","public_title":null,"options":["Default Title"],"price":1390,"weight":150,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}

Kegland

Beer NukaTap Creamer 7 discs set for stout spout

$13.90 AUD

Unit price

A set of 7 creamer discs for your NukaTap stout spout, each with a different hole pattern to fine tune that lovely nitro cascade. Swap discs to dial in the pour you like best, from a gentle surge to a tight, creamy head. A small kit that lets you play barista with your nitro beer or coffee.

Low in stock

Available for pickup at

Out of stock at

JG Push-In adapter 5/8 In Chrome for Beer Line 8mm OD

{"id":47779506258235,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"8KEGDC-08F5\/8I","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"JG Push-In adapter 5\/8 In Chrome for Beer Line 8mm OD","public_title":null,"options":["Default Title"],"price":590,"weight":150,"compare_at_price":750,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}

Kegland

JG Push-In adapter 5/8 In Chrome for Beer Line 8mm OD

$5.90 AUD$7.50 AUD

-21%

Unit price

Code: 130300

Screws directly onto your keg setup allowing you to push your beer/gas line with 8mm OD (5/16") into the fitting. Makes it easy to disconnect the line and eliminates the need to use hose clamps.

Suits 5/8” BSP threads most commonly found on keg couplers, tap shanks and many other beer related fittings.

L__cm x W__cm x H__cm

In stock

Available for pickup at

Out of stock at

Holesaw drill bit 25mm for port hole valve 12m ID

{"id":47779393339707,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"6FDRILL-HS25OD","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Holesaw drill bit 25mm for port hole valve 12m ID","public_title":null,"options":["Default Title"],"price":2090,"weight":520,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}

Keg King

Holesaw drill bit 25mm for port hole valve 12m ID

$20.90 AUD

Unit price

Code: 129090 These Tungsten Carbide Tipped (TCT) Holesaws are the ideal solution to your metal cutting needs. Designed for steel and stainless steel. For drilling stainless there is simply no alternative to TCT holesaws. They can also drill through wood, plastic, steel and many other materials. These are sold as full assembly so no arbour is needed. The handy spring built into the holesaw pilot ejects the core after drilling. Note: To extend the life of the holesaw it is important to use cutting lubricant or WD-40 while drilling. For maximum holesaw life use under 300 RPM when drilling stainless steel or steel.

Low in stock

Available for pickup at

Out of stock at

{"id":47779390947643,"title":"8 cm","option1":"8 cm","option2":null,"option3":null,"sku":"6CLEANB-80","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cleaning Ball for Tubing Ø 80-65mm - 8 cm","public_title":"8 cm","options":["8 cm"],"price":5200,"weight":1050,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}

The Artisans Bottega

Cleaning Ball for Tubing Ø 80-65mm

$52.00 AUD

Unit price

Keep your hoses performing at their best with this durable cleaning ball, designed to fit securely into hoses for effective, hassle‑free cleaning. Its tight seal helps remove buildup, prevent blockages, and maintain smooth flow during production. Made from high‑quality, long‑lasting materials, this cleaning ball is built to withstand regular, heavy‑duty use. A reliable tool for maintaining hygiene and efficiency in food and beverage processing systems.

Low in stock

Available for pickup at

Out of stock at