Keg Couplers & Beer Line

Code: 130300

Screws directly onto your keg setup allowing you to push your beer/gas line with 8mm OD (5/16") into the fitting. Makes it easy to disconnect the line and eliminates the need to use hose clamps.

Suits 5/8” BSP threads most commonly found on keg couplers, tap shanks and many other beer related fittings.

A flat rubber seal washer for a Cornelius keg post. It sits under the post and stops gas or beer weeping out around the thread, which is where most mystery keg leaks come from.

Cheap enough to replace whenever you pull a post off for cleaning rather than reusing a squashed one. Worth confirming your posts are Cornelius style before ordering a handful.

The humble plastic ball lock disconnects have been around a long time and are used by thousands of home brewers around the world.  Despite the extensive use they have seen little to no innovation for decades and KegLand wanted to change this.  As a result we have come out with the new duotight ball lock disconnect for the big chunky 9.5mm OD EVABarrier hosing.

This particular disconnect is predominantly used in our transfer kits to ensure fast flow with the larger ID capabilities.

Some of the features include:

1. duotight push in
   These duotight ball lock disconnects already have the duotight fitting built into the ball lock disconnect. No need for additional threaded fittings. Simply push the beer/gas line in and you are done!
2. Compact
   The worlds most compact ball lock disconnect every manufactured. This new compact form factor is great for tight spaces or fridges where you want to pack as many kegs in as possible. This is the only ball lock disconnect that allows standard ball lock kegs to be double stacked while still connected to beer and gas lines.
3. Overmoulded Poppet
   The overmoulded poppet design means you can couple and disconnect this ball lock disconnect under extreme pressures of 150psi and will never have issues with the o-ring blowing out.
4. Tool-less Disassembly
   Other ball lock disconnects require a tool such as a flat head screw driver or spanner to take them apart for cleaning. The new caps on these allow for easy disassembly by hand, making these easier to break down for cleaning. It's literally never been easier to remove hop particles from your ball lock disconnects.
5. Extreme Chemical Resistance
   No cheap ABS plastic or nitrile seals. This ball lock disconnect is made from stainless spring and ball bearings, with an engineering polykeytone resin body, EPDM and PP/EPDM overmoulded poppet.  This makes this ball lock disconnect resistant to extreme chemicals such as phosphoric and acetic acid, caustic soda, peroxide and many other acid or base chemicals which are commonly used in homebrewing.
6. Toughness
   This ball lock disconnect is more robust than any other plastic ball lock disconnect ever manufactured due to the use of new engineering plastics. Don't be fooled by the small form factor - these bad boys are tough!
7. High Flow
   The internal design of these allows for faster flow meaning you can slightly quicker transfers when compared to other plastic ball lock disconnects.

If you are often pulling your beer and gas line sideways we recommend the use of the duotight male to female elbow as this allows your gas to swivel 360 degrees without making a kink in the beer/gas line.

A stout pourer spout with creamer action, made by Keg King to add to an INTERTAP tap. It restricts and agitates the pour to give you the tight creamy head a stout is supposed to have.

This spout is for INTERTAP taps. If you are running something else on your font, check with us at Laverton North or Epping before you order.

A polycarbonate tube with a 12mm outside diameter and a 600mm length, usable as a dual sightglass or as a racking pipe. Polycarbonate lets you watch the level or the transfer without pulling anything apart. Check the 12mm outside diameter suits your fittings, or bring your hose along to Laverton North or Epping and we will test fit it.

A two tap Cobra font setup from the professional flooded series, packaged together rather than sold as separate pieces. Flooded fonts sit chilled so the first pour comes out as cold as the last. Suited to a home bar or a small venue pouring two lines. Talk to us about what you are mounting it on and we will confirm the package covers it.

NukaTap FC Auto Close Spring for Generation 1 Only

The NukaTap FC is the worlds only forward sealing flow control tap that can use a auto close spring.  By inserting the spring between the flow control device and NukaTap shuttle the tap to automatically close when you let go of the handle.

This is perfect for customers who may not be diligent enough to remember to completely turn off the tap after each pour. Or for those with little kids or pesky cats that knock everything around!

This very inexpensive spring can save you from emptying an entire keg and then loosing a whole bottle of gas.

Please Note: The spring is not compatible with the NukaTap SS Models.

This Nukatap mini & Nukatap FC spring is designed to suit all Nukatap Mini taps and also the Nukatap FC tap.  This custom made 304 grade spring size is designed specifically to ensure your Nukatap stays closed when it should.

Simple let go of the tap handle and the tap will snap shut and prevent accidentally leaving the tap on and emptying the keg onto the floor.

This handy inexpensive devices suits all Nukatap Mini and Nukatap FC taps and shank combinations.

Code: 130422

1/4in hex joiner allows the connection of additional manifolds to your existing gas line splitter.

L__cm x W__cm x H__cm

A Cornelius to Kinglock gas check valve, letting gas flow one way while stopping any beer or liquid backing up into your line. It keeps your gas side clean and your regulator protected. A small safeguard that saves a messy job down the track.

A Cornelius to Kinglock adapter with a liquid check valve, for connecting and washing out your kegs cleanly. The check valve keeps flow going one way, so cleaning and transfers stay tidy and controlled. A handy fitting for the keg lover chasing an easier clean up.

A Cornelius to Kinglock flooded font adapter, female to male with an 8mm push in, for keeping your font full and pouring perfectly. It links your keg gear to the K-Lok system cleanly and quickly. A tidy solution for a flooded font draught setup.

A Cornelius to Kinglock font adapter, female to male, for linking your keg gear to the K-Lok dry break system. It makes swapping and connecting lines quick and clean, with barely a drip. A handy piece for a well organised draught setup.

Dimensions:

To suit most 2.6kg and 6.0kg CO2 Bottles. If you are in need to get this product, please get it installed by a trained gas professional.

This is a replacement pin (o-rings included) for the Deluxe Sodastream Cylinder Adapter (with pin adjustment),

Nylon washer for the CO2 cylinder end of the FreedomOne Sodastream Adapter Hose.

This is a replacement washer if you have happened to lose or damage the washer which the 36 inch or 72 inch FreedomOne SodasStream Adapter hose is supplied with. 

A simple keg dispenser kit from Keg King, running from a disconnect through to a bronco tap. The cheap and cheerful way to pour off a keg when you have not got a font or a kegerator, and handy as a spare for parties and club nights. Check the disconnect style matches the posts on your keg before ordering.

A gas free ball lock line cleaning kit with a hand pump, so you can flush your beer lines without wasting CO2. It pushes cleaner through the lines and disconnects with ease, keeping your draught tasting fresh. Regular line cleaning is the secret to great beer at home, and this makes it painless.

If you want an easy way to balance your beer lines this is the way to do it.  Please be aware that even in the fully open position these FC disconnects do have some inherent flow resistance so you should use either shorter line or larger ID line that you would when compared with traditional ball lock disconnects. 

One of the benefits of FC disconnects is you don't need to rely on the small ID or line length to apply flow resistance so it would not make sense to use long lines or small ID lines as well as this is the job of the FC device.

Dimensions: 70mm high

Not compatible with 6.3mm ID x 9.5mm OD line

This is perfect for people who want to serve a large range of beverages with differing carbonation levels as it gives you the ability to adjust resistance easily. Now with the added benefit of duotight fittings built in.

This particular ball lock disconnect has been designed to suit 8mm Beer Line. Due to the integrated duotight fitting the line will simply push directly into this fitting.

Black stainless steel duotight compatible short shanks are the perfect addition to your Black Phantom font tower. Couple this with the Black NUKATAP SS Punisher Edition for the ultimate sleek and stealthy draught setup for your kegerator or home bar.

duotight short shanks manufactured after March 2021 have a redesigned barb increasing their reliability.

A stainless steel three way tee with a 13MOD male connector, from Keg King. Splits a single gas or liquid line into two runs, which is what you want as soon as you are pushing more than one keg off the one bottle. Supplied as the single fitting. The listing detail here is brief, so check the connector type with us before ordering if you need to be certain.

A stainless steel font short shank tap kit with 8mm duotight fittings, for a tidy, reliable pour from your font tower. The stainless build keeps things hygienic and the duotight connections make assembly quick and leak free. A quality piece for the home kegerator setup.

Upgrade your draft system with the duotight Straight MFL Joiner, designed for EVABarrier 6mm ID x 9.5mm OD beer and gas lines, as well as most 9.5mm outer‑diameter tubing. 

Engineered with a double O‑ring seal (EPDM + silicone), this fitting delivers exceptional leak protection, even in cold temperatures or tight hose bends. Perfect for kegerators, keezers, fridges, and any setup where reliability and easy identification matter.

Choose duotight for the most secure, high‑performance push‑in fittings on the market

A 6mm silicone dip tube, 60cm long, finished with a stainless steel foot filter. Silicone stays flexible when cold and takes a hot clean, and the foot filter keeps the worst of the solids out of the line. Check the 6mm size against your fitting before ordering, and ring us if you need a hand working out the length.

Code: 130148

This growler filling spout attaches to the Intertap series of taps and allows you to easily attach a length of hose to the 13mm barb.

L__cm x W__cm x H__cm