New Customers get 5% OFF
Fast Shipping
Expert Advise
New Customers get 5% OFF
Fast Shipping
Expert Advise
New Customers get 5% OFF
Fast Shipping
Expert Advise
New Customers get 5% OFF
Fast Shipping
Expert Advise
New Customers get 5% OFF
Fast Shipping
Expert Advise
New Customers get 5% OFF
Fast Shipping
Expert Advise
- All categories
Your cart
Built to handle large catalog
Maximize' exclusive deal: After purchasing, you’ll receive: Free theme design & setup and 2 months free access to 200+ advanced sections & templates.
Explore full power of Maximize Theme
Choose your Location
-
Epping
Free
Usually ready for pickup in 24 hours
218 Cooper St, Epping VIC 3076
📞 (03) 9422 1711
🕐 Mon – Fri: 9 am – 5 pm
Sat: 9 am – 1:30 pm
Sun: Closed -
Laverton North Branch
Free
Usually ready in 24 business hours
Unit 2/176-178 Cherry Ln, Laverton North VIC 3026
📞 (03) 9422 1711
🕐 Mon – Fri: 9 am – 3 pmSat: 9 am – 1:30 pm
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
Salami & Sausages
Salami season in Melbourne runs from about May to August, when the garages get cold enough to hang meat. This is everything the season needs, and most of our customers work through it in the same order every year.
Start with the grind. Hand mincers for a household batch, electric mincers and motor attachments when several families are working together, and the knives and plates that wear out and need replacing.
Then the mix and the fill. Meat mixers, sausage fillers from Reber, FLB and Trespade, curing salt and cultures, and seasoning packs if you would rather not weigh spices yourself.
Casings are the decision people ask us about most. Natural casings and bungs for the traditional result, collagen casings and wraps when you want a consistent diameter with no soaking.
Then hang it. Netting and netting tubes, string, hooks and gambrels, and salumi curing cabinets if the garage will not hold temperature. Watch it with a hygrometer, and slice it on a meat slicer when it is ready.
Hundreds of lines, in stock at Laverton North and Epping. If it is your first year, come in and talk to us before you buy anything.
548 products
548 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$20.00 AUD
Carbon steel mincer plate for No 10 and No 12 mincers, with 14mm holes. A coarse plate, the sort you reach for on a first pass through the mincer before a finer cut.
This one is flagged OLD in our listing, so it is older stock rather than current production. Carbon steel, not stainless. Bring your plate in to Laverton North or Epping and we will match it up.
$45.00 AUD
Drive shaft for the Fabio Leonardi SP2 electric tomato machine. This is the shaft that carries the drive through to the auger, and it takes a hammering across a long day of passata, so it is a sensible spare to keep on the shelf.
For the SP2 electric machine. If you are running a different SP model, check with us first so you get the right shaft.
$45.00 AUD
Drive shaft for the Fabio Leonardi SP2 manual tomato machine, supplied complete with the spring and seals. Handy when you are rebuilding rather than chasing each small part separately.
This one is for the manual SP2, not the electric version. Confirm which machine you have before ordering, or bring the old shaft into Laverton North or Epping and we will compare it on the counter.
$155.00 AUD
Worm screw for the Fabio Leonardi TC32 mincer attachment, in a nickel plated Niploy finish. The worm is what feeds meat through to the plate and knife, and a worn or scored one makes for smearing rather than a clean cut.
For the TC32 attachment. If you are running a smaller mincer, ask Laverton North or Epping for the matching worm rather than assuming this one drops in.
$20.00 AUD
End retaining nut in Niploy finish for the Fabio Leonardi No 8 mincer, 8cm diameter. It is the ring nut that screws on over the plate and knife and holds the whole cutting set under tension, so a stripped thread here puts the mincer out of action.
Suits the No 8 mincer. Check your thread and diameter before ordering.
$22.00 AUD
Nylon spacer for the Fabio Leonardi No TC 8 stainless steel mincer worm, 17mm internal diameter and 4mm thick. It sets the correct gap on the worm assembly so the cutting set runs true rather than binding.
Made for the TC 8 stainless worm. Measure the internal diameter and thickness of yours before ordering.
$146.18 AUD
Fabio Leonardi No 12 mincer body in a nickel plated finish, sold as the body only. Worth knowing that means no worm, plate, knife or ring nut, so you will be transferring your existing internals across or buying them separately.
Suits the No 12 size. Bring your old body into Laverton North or Epping and we will check the fit with you.
$167.04 AUD
Fabio Leonardi No 22 mincer body in a nickel plated finish, supplied as the body on its own. No worm, plate, knife or ring nut is included, so plan on reusing your current internals or ordering them alongside it.
For the No 22 size only. Confirm the number stamped on your existing body before you order.
$59.80 AUD
Stainless steel hopper bowl for the Fabio Leonardi No TC 8 mincer in both the stainless and NS versions, measuring 20cm x 25cm. It holds the diced meat above the throat so you are not feeding the mincer a handful at a time.
Listed for the TC 8 in those two finishes. Check your mincer size before ordering.
$62.00 AUD
Stainless steel hopper bowl for the Fabio Leonardi TC12 mincer attachment. Stainless washes up properly and will not hold onto fat the way older bowls do, which matters when you are working through a big tray of pork.
Made for the TC12 attachment. If yours is a TC22 or TC32, ask Laverton North or Epping for the bowl that matches instead.
$68.00 AUD
Stainless steel hopper bowl to suit the Fabio Leonardi TC22 and TC32 mincer attachments. A bigger bowl for the bigger attachments, so you can load up and keep feeding rather than stopping every minute.
Covers the TC22 and TC32 sizes. Check which attachment you are running before ordering, and give us a call if the stamp has worn off.
$15.00 AUD
Nylon washer for Fabio Leonardi mincers in No 12, 22 and 32. It sits in the cutting assembly as a low friction spacer, and it is the sort of part worth buying two of while you are thinking about it.
Covers the No 12, 22 and 32 sizes. Check the number on your mincer before ordering.
$12.00 AUD
Nylon washer for the Fabio Leonardi No 8 mincer. Small, inexpensive and easy to lose in the sink during a clean up, which is exactly why we keep them on the shelf at both stores.
Sized for the No 8 only. If your mincer is a No 12 or larger, ask us for the matching washer instead of ordering this one.
$8.00 AUD
Seal for the Fabio Leonardi MR9 and MR0 1.0hp motors. It keeps oil in the gearbox and dust out of it, and swapping a hardened seal early saves a much bigger job later on.
Listed for the MR9 and MR0 at 1.0hp. Check the model and rating on your motor before ordering, or bring it into Laverton North or Epping and we will identify it with you.
$35.00 AUD
Drive shaft for the Fabio Leonardi mincer worm in No TC 12, 22 and 32, 25mm diameter. It is the shaft the worm rides on, and play or scoring here shows up as a mincer that feels rough through the whole cut.
Covers those three sizes at 25mm. Measure your shaft before ordering to be sure.
$35.00 AUD
Drive shaft for the Fabio Leonardi No TC 8 mincer worm in Niploy finish, 17mm diameter. The Niploy plating is the nickel finish rather than stainless, so it is worth matching what came out of your machine.
For the TC 8 at 17mm. Measure the shaft you are replacing and confirm the finish before ordering.
$35.00 AUD
Stainless steel drive shaft for the Fabio Leonardi No TC 8 mincer worm, 17mm diameter. The stainless version of the same shaft, which most people prefer for anything that spends its life in contact with raw meat.
Made for the TC 8 at 17mm. Check the diameter and finish of your original before you order.
$820.00 AUD
The largest model of electric meat grinder we propose. Thanks to its powerful 0.8 hp motor with a turnaround it is able to choke any type of meat. Dismanvammoned in every part and stands out for its ease of use. It is equipped with a car sharpening knife, a die, the tray and the front bezel all made of stainless steel as the body of the machine, a number one material in terms of durability and hygiene. The epicycloidal system of the permanent grease-bath reducer, allows you to work continuously with maximum silence. If modified with the tools in the separately sold kit, can also become a tomato squeezer.
- p 50xl 28xh 27
- Engine hp 0.8
- Body in stainless steel
- Epicycloidal reduction in steel
- lubrication in permanent grease
- Hourly production 70-120 kg
- Weight 18 kg
The Best model of electric meat mincer proposed by Equip Pro. Thanks to its powerful 0.8 Hp motor with reverse gear it is able to mince any type of meat. It can be disassembled in all its parts and stands out for its ease of use.
It is equipped with a self-sharpening knife, a die, the tray and the front ring all made of stainless steel like the body of the machine, the number one material in terms of durability and hygiene. The epicyclic system of the permanent grease bath reducer allows to work continuously with the utmost silence. It can be modified with the tools in the special kit sold separately, can also become a tomato squeezer.
This Carnivore Collective Meat Tenderizer Attachment can attach to your Carnivore Collective Meat Mincers. The Tenderizer attachment can help you tenderize the toughest meat easily.
The Meat Tenderizer attachment is available to purchase as a Tenderizer blade model or as a Jerky/Beef Strip blade model. The Jerky blades make perfect jerky strips.
Features:
- Attaches to your #12, #22 & #32 Carnivore Collective Meat Mincers
- Available to purchase with Tenderizer Blades or Jerky/ Beef Strip Blades
- Chute accepts 1-1/4’’ thick and 5’’ wide meat
- The cast iron and nylon body combination means it is made to last
- 1 year warranty
A 52 litre stack and nest plastic food crate, made for storing and moving ingredients around the kitchen. It stacks when full and nests when empty to save space, and the food grade plastic wipes clean in a moment. A hardworking piece for any busy kitchen or small production.
$6.93 AUD
Easy tie tags measuring 50mm x 100mm, supplied in a pack of 25. Used for labelling salami and sausage during hanging, so you know what is what six weeks later instead of playing guess the batch. Writing surface and attachment method are as supplied. If you need a larger quantity than the 25 pack, ask us what we can do on bulk.
$98.79 AUD
Slimline interleaved hand towels, 230 x 230mm, 4000 sheets to a carton. Buying by the carton is the sensible way to do it if you go through towels in a prep room or on a shop floor. Sized to suit a slimline interleaved dispenser. Confirm your dispenser takes the 230 x 230mm sheet before ordering a full carton.
$52.00 AUD
A slimline white plastic hand towel dispenser, sized for interleaved towels at 230 x 230mm. The slimline body does not eat wall space in a small prep area or a cool room entry. Towels are sold separately. Ask at Laverton North or Epping if you want to check your towel size against the dispenser before ordering.
$30.90 AUD
A genuine Rover Pompe seal kit to suit the 2013 BE-M 25 pump, with the seals needed to stop leaks and get it pumping cleanly again. Keeping a spare kit on hand means a quick fix rather than downtime at the worst moment. The sensible way to look after a hardworking pump.
$28.90 AUD
4 pc set of rubber gaskets and ring seals for the repair of ROVER POMPE 2010 ROVER 25 CE, DRILL 25, MARINA 25 pumps.
Original manufacturer's spare part code: 987035
$28.00 AUD
Stainless steel mincer plate for No 10 and No 12 mincers, 12mm hole size. A coarse plate for a first pass, and stainless means it washes up and stores away without the fuss carbon steel demands.
Plate sizing varies between makes, so measure the outside diameter of the plate you are replacing and confirm it matches before you order.
$6.00 AUD
An FLB Fabio Leonardi spare box, listed as a kit comprising a motor plus attachment. The title reads like an internal supplier note rather than a customer description, and it does not say which motor or which attachment is included.
Ring Laverton North or Epping before ordering this one and we will check the listing against the FLB parts list and tell you what it actually is.
$25.00 AUD
The Trespade Filler Part features a durable aluminium screw ring nut designed to securely retain the funnel in place. Compatible with Trespade models 3, 5, 7, and 10 liters, this component ensures a reliable fit and smooth operation during filling tasks. Ideal for maintaining the integrity and functionality of your Trespade equipment.
$398.92 AUD
The Trespade manual mincer in size 32, with a cast body. Size 32 is the large end of the range, so it takes a serious feed of meat and is built to be clamped or bolted down and cranked by hand.
Plates, knives and stuffing tubes are sized to the mincer, so check the number stamped on your gear before adding accessories.
Compare every hand mincer we stock, with plates and knives to suit.
Showing 480/548
- Choosing a selection results in a full page refresh.
- Opens in a new window.