New Customers get 5% OFF
Fast Shipping
Expert Advise
New Customers get 5% OFF
Fast Shipping
Expert Advise
New Customers get 5% OFF
Fast Shipping
Expert Advise
New Customers get 5% OFF
Fast Shipping
Expert Advise
New Customers get 5% OFF
Fast Shipping
Expert Advise
New Customers get 5% OFF
Fast Shipping
Expert Advise
- All categories
Welcome to The Artisans Bottega
Main menu
-
Food Making
- Food Making
-
Sauce Making
-
Salami & Sausages
-
Pasta Making
-
Pizza Making
-
Cheese Making
-
Italian Specialists
-
Preserving
-
Olives
-
Smoking & Curing
-
Kitchen Equipment & Tools
-
Beverage Production
- Beverage Production
-
Beer Brewing
-
Wine Making
-
Spirits & Distillation
-
Cider, Ginger Beer & Kombucha
-
Fermenters & Accessories
-
Bottles & Closures
-
Calculators
Your cart
Built to handle large catalog
Maximize' exclusive deal: After purchasing, you’ll receive: Free theme design & setup and 2 months free access to 200+ advanced sections & templates.
Explore full power of Maximize Theme
Choose your Location
-
Epping
Free
Usually ready for pickup in 24 hours
218 Cooper St, Epping VIC 3076
📞 (03) 9422 1711
🕐 Mon – Fri: 9 am – 5 pm
Sat: 9 am – 1:30 pm
Sun: Closed -
Laverton North Branch
Free
Usually ready in 24 business hours
Unit 2/176-178 Cherry Ln, Laverton North VIC 3026
📞 (03) 9422 1711
🕐 Mon – Fri: 9 am – 3 pmSat: 9 am – 1:30 pm
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
Meat Cloth Stockinette
When a leg or a salami goes up to hang, it needs to be covered. Cloth does two jobs at once. It keeps flies and dust off the meat while it dries, and it lets air move through the weave instead of trapping moisture against the surface the way a sheet of plastic would.
What we keep here is simple enough. The cotton bag for prosciutto is made in Italy and is the one people reach for once the salting is finished and the leg is ready for the hang. The cotton cloth bag is the general purpose version, useful for smaller cuts and for anything you want covered without wrapping it tight. Cotton can be washed and used again, which is the main reason people choose it over a single use option.
The practical tip is about fit. A bag wants to be snug but never stretched. If the cloth is pulled hard against the meat it will stick to the surface as the outside dries, and you end up peeling it away in pieces at the end of the hang. Give it a little slack, tie it off at the top, and check it in the first week while the surface is still tacky.
Come in and feel the weave at Laverton North or Epping before you commit. See also netting and netting tubes, butchers string, salami and sausage making and smoking and curing.
When a leg or a salami goes up to hang, it needs to be covered. Cloth does two jobs at once. It keeps flies and dust off the meat while it dries, and it lets air move through the weave instead of trapping moisture against the surface the way a sheet of plastic would.
What we keep here is simple enough. The cotton bag for prosciutto is made in Italy and is the one people reach for once the salting is finished and the leg is ready for the hang. The cotton cloth bag is the general purpose version, useful for smaller cuts and for anything you want covered without wrapping it tight. Cotton can be washed and used again, which is the main reason people choose it over a single use option.
The practical tip is about fit. A bag wants to be snug but never stretched. If the cloth is pulled hard against the meat it will stick to the surface as the outside dries, and you end up peeling it away in pieces at the end of the hang. Give it a little slack, tie it off at the top, and check it in the first week while the surface is still tacky.
Come in and feel the weave at Laverton North or Epping before you commit. See also netting and netting tubes, butchers string, salami and sausage making and smoking and curing.
77 products
77 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$70.16 AUD
Metal gear for the Fabio Leonardi MR06 1.5hp motor. Gear teeth chip or wear round over time, particularly on a motor that has done a few decades of salami seasons, and a fresh gear brings the drive back to how it should feel.
For the MR06 at 1.5hp. Check your model plate before you order.
$110.00 AUD
Metal drive gear, part number 11, for the Fabio Leonardi MR10 and MR6 1.5hp motors. Metal rather than plastic, and it is the gear that takes the load when you are pushing a full hopper through the mincer.
Listed for the MR10 and MR6 at 1.5hp. Confirm your motor model and rating before ordering.
$30.00 AUD
Complete bush set for the Fabio Leonardi MR10 motor. Buying the set rather than chasing individual bushes saves a second order halfway through a rebuild, which is usually where these jobs come unstuck.
For the MR10 motor only. Check the model plate before ordering, or bring the motor into Laverton North or Epping and we will look at it with you.
$12.00 AUD
Rubber oil seal bush for the Fabio Leonardi MR0, MR8 and MR9 motors. Rubber hardens and cracks with age and heat, so this is a sensible part to replace whenever you have the gearbox open for anything else.
Suits the MR0, MR8 and MR9. Have your motor model handy and confirm it with us if you are unsure.
$12.00 AUD
Rubber oil seal bush for the Fabio Leonardi MR10 and MR6 motors. It keeps gearbox oil sealed in and dust sealed out, and a perished bush usually announces itself as a film of oil on the bench underneath the motor.
Listed for the MR10 and MR6. Confirm your motor model before ordering.
$68.00 AUD
Stainless steel hopper bowl to suit the Fabio Leonardi TC22 and TC32 mincer attachments. A bigger bowl for the bigger attachments, so you can load up and keep feeding rather than stopping every minute.
Covers the TC22 and TC32 sizes. Check which attachment you are running before ordering, and give us a call if the stamp has worn off.
$62.00 AUD
Stainless steel hopper bowl for the Fabio Leonardi TC12 mincer attachment. Stainless washes up properly and will not hold onto fat the way older bowls do, which matters when you are working through a big tray of pork.
Made for the TC12 attachment. If yours is a TC22 or TC32, ask Laverton North or Epping for the bowl that matches instead.
$59.80 AUD
Stainless steel hopper bowl for the Fabio Leonardi No TC 8 mincer in both the stainless and NS versions, measuring 20cm x 25cm. It holds the diced meat above the throat so you are not feeding the mincer a handful at a time.
Listed for the TC 8 in those two finishes. Check your mincer size before ordering.
$167.04 AUD
Fabio Leonardi No 22 mincer body in a nickel plated finish, supplied as the body on its own. No worm, plate, knife or ring nut is included, so plan on reusing your current internals or ordering them alongside it.
For the No 22 size only. Confirm the number stamped on your existing body before you order.
$146.18 AUD
Fabio Leonardi No 12 mincer body in a nickel plated finish, sold as the body only. Worth knowing that means no worm, plate, knife or ring nut, so you will be transferring your existing internals across or buying them separately.
Suits the No 12 size. Bring your old body into Laverton North or Epping and we will check the fit with you.
$22.00 AUD
Nylon spacer for the Fabio Leonardi No TC 8 stainless steel mincer worm, 17mm internal diameter and 4mm thick. It sets the correct gap on the worm assembly so the cutting set runs true rather than binding.
Made for the TC 8 stainless worm. Measure the internal diameter and thickness of yours before ordering.
$24.00 AUD
Pin for the Fabio Leonardi No TC 8 stainless steel mincer worm attachment, 8mm shaft diameter. The pin locks the worm to the drive shaft, and once it shears the worm spins free and the mincer stops feeding.
For the TC 8 stainless attachment with an 8mm shaft. Measure your pin before ordering if there is any doubt.
$6.00 AUD
Small flat washer for the Fabio Leonardi MR10 motor. It spreads load under a fastener and keeps everything seated the way it should be inside the motor assembly, which matters more than the size of the part suggests.
Listed for the MR10 motor. Check the model plate on your motor before ordering so you are not guessing.
$2.73 AUD
Rubber feet, part number 3, for FLB sausage fillers. They stop the filler skating across the bench while you are cranking and take the rattle out of the job. Perished or missing feet are one of the most common things we replace.
Made for the FLB fillers. Bring one in to Laverton North or Epping if you want us to match the size.
$12.00 AUD
Replacement knob for the Garhe TC12, TC22 and TC32 mincers supplied by Fabio Leonardi. A cheap part that makes a real difference to how the handle feels in your palm once the original has split or gone loose.
Covers the TC12, TC22 and TC32 sizes. Check which number is stamped on your mincer before ordering.
$10.00 AUD
Spare knob for the Garhe TC8 mincer supplied by Fabio Leonardi. It is the grip on the end of the handle, and a cracked or spinning knob makes an otherwise sound mincer genuinely unpleasant to use.
Sized for the No TC8 only. If your mincer is a TC12 or larger, ask us for the right knob rather than ordering this one.
$22.00 AUD
Spare handle for the Garhe TC8 mincer supplied by Fabio Leonardi. The handle is the part that cops every bit of effort you put into the mincer, so bent shafts and worn sockets are common on older units.
Made for the No TC8 Garhe mincer. If yours is a larger size, ask us for the matching handle rather than this one.
$13.00 AUD
Medium rubber oil seal bush for Fabio Leonardi motors. It keeps gearbox oil where it belongs and stops grit working its way in, so a perished seal usually shows up as a weep on the bench before anything worse happens.
Listed as the medium size. Check your motor model and the size you need with us before ordering.
$45.00 AUD
Replacement base for Fabio Leonardi motors, available in black or white. The base is what keeps the motor steady on the bench while the mincer or tomato attachment is under load, and a cracked one lets everything wander.
Colour choice aside, confirm the base matches your motor before ordering. Our Laverton North and Epping counters can check it against your unit.
$8.00 AUD
Surclip washer for Fabio Leonardi MR0, MR8 and MR9 motors. A circlip style retainer that locks a shaft or bearing in position, and once it has fatigued or been lost during a strip down the assembly simply will not hold together.
Listed for the MR0, MR8 and MR9 motors. Confirm your motor model before you order.
$7.00 AUD
Small flat stainless steel washer for Fabio Leonardi MR0, MR8 and MR9 motors. It is a minor part with a real job, keeping fasteners seated and load spread where it belongs inside the motor housing.
Suits the MR0, MR8 and MR9 motors as listed. Check your motor plate before ordering so you get the right washer the first time.
$4.00 AUD
Gearbox grease for Fabio Leonardi motors, sold in portions of roughly 50g. Supplied for repairs only, so it is intended for topping up or repacking a gearbox you have opened rather than for general lubrication.
Follow the manufacturer guidance for your motor when reassembling. If you are not sure how much your gearbox takes, give us a ring before ordering.
$38.00 AUD
Drive shaft for the Fabio Leonardi SP5 and SP3 electric tomato machines. It transfers drive through to the auger, and when passata season lands it is the sort of part you do not want to be waiting on.
Fits the SP5 and SP3 electric machines. Have a look at your model plate and confirm which one you are running before you order.
$20.00 AUD
End retaining nut in Niploy finish for the Fabio Leonardi No 8 mincer, 8cm diameter. It is the ring nut that screws on over the plate and knife and holds the whole cutting set under tension, so a stripped thread here puts the mincer out of action.
Suits the No 8 mincer. Check your thread and diameter before ordering.
$155.00 AUD
Worm screw for the Fabio Leonardi TC32 mincer attachment, in a nickel plated Niploy finish. The worm is what feeds meat through to the plate and knife, and a worn or scored one makes for smearing rather than a clean cut.
For the TC32 attachment. If you are running a smaller mincer, ask Laverton North or Epping for the matching worm rather than assuming this one drops in.
$30.00 AUD
A Reber motor part, the mechanical oil seal with a 35mm outer and 15mm inner diameter. If your motor has started to weep oil, this genuine seal puts it right. A small spare that keeps your Reber unit running clean and reliable.
$75.00 AUD
A 0.3 Hp Reber motor gear set, listed as set 2 for the post 2020s model. Gears are the first thing to complain when a motor has been asked to push too hard for too long. It is listed for the post 2020s model only, so the earlier machines are not covered. Check the age and model of your Reber before ordering and we will verify it.
$649.00 AUD
- 48mm in feed
- 70-140kg per hour
- Continuous duty, electric induction motors
- Body made from cast iron and treated for food use with epoxy powder baked at 300deg
- Propeller in antifriction acetal resin which is suitable for food contact
- Filter cone, drip tray, anti spray guard and large capacity funnel in AISI 304 stainless steel
- Cooling fan, fan cover & switch condenser box manufactured in high grade plastic
- Protection class IPX5
- Axial and reduction unit with oil-bath nylon 6.6 gears
$968.00 AUD
A Reber 1.5 Hp gear box and motor on a black base, supplied as the motor unit only. Attachments, mincer heads and fillers are not included. This is the part you buy when the motor has finally given up but the attachments are still good. Reber motors changed over the years, so confirm your base and attachment fitting with us before ordering this one.
$480.00 AUD
A Reber gear box with a 0.5Hp motor, supplied on a black base. Motor and gear box only, so attachments are not part of this listing. This is the drive unit, the piece you replace when the motor has had enough but the attachments are still perfectly good. Check that your Reber attachments mount to this unit before ordering.
Showing 60/77
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.