Kitchen Equipment

Rubber feet plugs, listed as BBS, for the fold out legs on a barbecue. They cap the leg ends so the frame is not sitting metal on tile.

Small parts that go missing between one summer and the next, sold as replacements. If you want to be sure they match your legs, measure the tube and send us the size.

From the creators of the original award-winning all grain brewing system, the Grainfather G70 is the next level in brewing equipment. The ultimate Brewing System with a gigantic 70 L capacity, allowing you to create 60L batches of beer at a time. Now featuring a new perforated grain basket and an integrated sight glass now as a part of the recirculation pipework.

• Wireless brew session control. Connect your smart controller to the Grainfather app for remote-controlled brewing.
• Two stage false bottom. The conical base allows a false bottom with an inner collar to sit in the recess of the base. Early testers used 21 oz (600g) of hops and saw full flow through the pump. Very effective!
• Concealed conical heating element. The element covers 80% of the base and it's mounted using thermal paste rather than braised. This increases heat efficiently, by minimizing heat loss in areas it’s not needed. The wide heating area minimizes hot spots and scorching. Most solids settle on the false bottom, not the elements, making clean up a breeze.
• Integrated sight glass for easy volume readings. Instead of trying to judge the level of your preboil, you can now sparge until you reach preboil volume. It’s also easy to clean. The sight glass cap can be replaced with the sight glass cleaning barb to recirculate cleaner.
• High temp & flow rate, food-grade pump. With a 2 Gal (8L) per min flow rate, you can transfer your brew efficiently and safely.
• Convenient side entry recirculation. Rather than up and over, the G70 has a built in side port. If the pump is accidentally switched on, the wort is safely directed back into the boiler.
• New rolled edge, mash plates and hop filter for increased strength and easy set up. No more silicone seals, the plates have a smooth finish, making them more robust, hard-wearing, and easy to install. Compared to the G30, the G70 is wider, but not much taller. Comparatively, draining is quick from the basket and there’s less likelihood of a stuck sparge as the draining surface is bigger.
• Safety aspects including locked in support ring, heavy duty, no slip brackets on the grain basket and protection from knocking the ball valve open.
• Automatic heat sensors and safety cut-out for dry boil protection.
• Huge Wort Chiller. Despite the volume more than doubling, cooling times remain about the same as the G30 thanks to a powerful pump, efficient false bottom, and bigger wort chiller. The large size means it needs to be positioned away from the G70, however, this is made easy with longer silicone tubing.
• Lifting bar included with winch lifting hook. Use the bar for a two person lift or use a winch system for individual brewers.
• Large dual-stage hop filter provides a large surface area to allow for a hopping rate of up to 3.25 lbs (1.5kg) which also reduces pump load and blockages.
• Clean in place (CIP) capability. Cleaning after a brew session has never been so quick and easy. With CIP capability, there are minimal parts that need to be removed and individually cleaned. Every G70 has a cleaning filter included. Simply add your cleaner, run water through the unit, and drain.
  Electrical Req:
  • Power Req: 3300 W, 220-240 V, 50Hz/60Hz
  • Power Supply Outlet Req: NEMA 6-15R or NEMA6-20R compatible
  Specs:
  • Dimensions: 35.6" H x 24.4" L x 22.6" W
  • Weight: 80.5lbs (103lbs shipped)
  • Volume: Max Preboil 18.5 Gal (70L)
  • Batch Size: Max 17.2 Gal (65L), Min 10.5 Gal (40L)
  • Grain Weight (dry): Max 37.5lbs (17kg), Min 17.6lbs (8kg)
  • 304 Stainless Steel
  • Power Req: 3300 W, 220-240 V, 50Hz/60Hz
  • Power Supply Outlet Req: NEMA 6-15R or NEMA6-20R compatible
  • Heating Element: 3150 W
  • Power Cord Length: 8.2ft (2.5m)
  • Mash Tun Dead Space: 1.8 Gal (4L)
  • Boil off rate: 1.1 Gal (4L) per hour
  What's Included?
  • Grainfather G70
  • Counter Flow Wort Chiller
  • Dust cover
  • Mash recirculation hose
  • Lifting Bracket
  Required Specifications for the App:
  iPhone/iPad
  • iPhone 5 or higher
  • iOS10 or higher. Must have Bluetooth 4.0 or higher
  Android
  • Android 5.0 (API Level 21 - Lollipop) or higher
  • Must have Bluetooth Low Energy (LE)/Bluetooth Smart

RGV Stainless Steel Cone filter for Tomato separator

Product Description:
The Essedue 300C Electric Meat Slicer, made in Italy, is the perfect machine for cutting salami, hams, bacon, and a variety of cured meats. Featuring a 300mm stainless steel blade, a durable die-cast aluminum body, and a built-in sharpener, it offers precision slicing and easy maintenance. Ideal for home, deli, café, or restaurant kitchens, this slicer is designed for both convenience and performance.

Key Features:

• 300mm stainless steel blade for accurate slicing.
• Built-in twin stone sharpener ensures blades stay sharp.
• Adjustable slicing thickness with variable handle control.
• Durable die-cast aluminum body with professional ventilated motor.
• Easy to clean with removable knife guard and tray.
• Serrated bulkhead and wide tray for secure meat handling.
• Made in Italy, combining quality craftsmanship with modern design.

Compare every model in our Italian meat slicers range, and find replacement blades in slicer parts and blades.

This heat insulation jacket is designed to be used with the Grainfather to keep heat contained in the boiler and maintain a constant temperature during your brew during cooler times of the year.

Designed for the Grainfather for heat insulation, especially in colder temperature areas. Easy to wipe clean, polyurethane outer layer, and machine washable.

Features 

• Material - SBR Foam (11 mm thickness)
• Designed for the Grainfather for heat insulation, especially in colder temperature areas.
• Easy to wipe clean, polyurethane outer layer, and machine washable.

Spare Part- EquipPro Sausage Fillers No.6 Piston Oring OD120 x 2mm

Approximate Dimensions

Diameter: 13 cm 

RGV Duetto Stainless Steel Mincer Blade Cutter for Mincer Attachment. These stainless steel mincer accessories feature an efficient design and durable stainless steel that does not lose integrity over the years.

Don’t forget to regularly clean and dry your parts with a mild detergent after every use as they can rust and become grimy if left un-checked.

A biscuit mould attachment for the Tre Spade No. 8 mincer. The listing also gives it as suiting other No. 12 mincers in the Garhe and FLB models. It fits onto the mincer in place of the plate so you can extrude biscuit dough straight from the machine. Given it spans a few machines, confirm your mincer number and brand with us before ordering.

A replacement crank handle for Rigamonti mincers, art 120/126/125. The part that takes every bit of force you put through the machine, and the first thing to go if it has been leaned on hard. Match the art number on your mincer to the one listed here, or bring the old handle into Laverton North or Epping and we will match it at the counter.

Features

• Dual Tap
• Glycol Loop for use with glycol or water chiller
• Made from cast brass with chrome plating
• 5/8 inch female sockets for attaching shanks

To attach a tap to these fonts, you'll need either the Stainless Short Shank without barb or the KingLok font adaptor and KingLok tap shank adaptor. If necessary, 8m compression fittings to 6mm barb are recommended to fit 4-6mm ID lines.

Taps not included

A blue plastic guide bracket to suit the Imperia pasta machine motor, keeping everything lined up and running smoothly. If yours has worn or gone missing, this gets your motorised setup back in action. A handy spare to keep your pasta days rolling.

We stock spare parts across the Imperia pasta machine range, so an older machine usually needs one part rather than a replacement.

Product Description:
The Essedue 195AF Electric Meat Slicer, crafted in Italy by ESSEDUE Srl, combines precision, safety, and exceptional design. Featuring a 195mm cutting blade, a removable sharpener, and a durable die-cast aluminum body, this slicer ensures efficient and hygienic slicing for any kitchen.

Key Features:

• 195mm precision cutting blade.
• Removable sharpener for easy maintenance.
• Robust die-cast aluminum construction.
• Designed and made in Italy, meeting international safety and hygiene standards.

Compare every model in our Italian meat slicers range, and find replacement blades in slicer parts and blades.

Double-lever bottle capper with a 26mm magnetic bell housing for standard bottle caps. High-quality and very easy to use.

This nylon lever capper features an advanced, patented design with a gear‑driven capping head, reducing the amount of force needed to crimp steel bottle caps.

It also includes extra‑wide handles for improved comfort and stability, and a return spring around the capping head that automatically releases the capper once the seal is complete.

Code: 127621

30W Fermenter Heating Belt easily wraps around any fermenter to help control temperatures in cold months.
Belt can simply be moved up and down the fermenter in order to control temperature.

Code: 127623

These flexible heat pads are manufactured from polyurethane to give water resistant properties combined with durability & flexibility. Will provide low heat for the purpose of brewing or fermenting.

Code: 130166

Custom lid for plastic conical fermenter with stainless steel ball lock posts and pressure relief valve. Includes stainless float ball and 60cm silicone tube. Pressurises fermenter allowing beer to be drawn from the top where beer is most clear.