Fermenters for Stills

All-Rounder Includes:
1 x All rounder tank
1 x 304 stainless stand
1 x Airlock
1 x Pressure rated lid
1 x Digital temperature sticker

The FermZilla 30L All Rounder is the perfect fermentation vessel that can be used for fermenting under pressure, carbonating and dispensing.

Easy to Clean
This fermenter is made from super smooth PET so it's easy to clean.  Just use s small scoop of Powerful Brewery Wash and wipe it clean after a 5 minute soak.  No scrubbing necessary.

Pressure Rated
This fermenter is rated up to 2.5bar so you can force carbonate just like a keg.  You can use this fermenter for closed transfers and signficiantly reduce oxygen exposure.

Crystal Clear
The wall of the All Rounder is crystal clear so you can see what's going on inside.  This makes it really easy to determine visually how the fermentation, how the yeast is floculating etc.

Introducing the Gen3 FermZilla Tri-Conical. Now with 3 Inch Tri-Clover ferrule moulded into the tank and a 600mL Collection container with a 3 Inch Tri-clover connection, the gold standard for sanitary design and effortless removal. 

This unit was born from customer feedback we received on the Gen2 Model. No more complicated dump valve designs here, just simplicity. Brew with confidence on the new Tri-Clover FermZilla Range.

The new FermZilla is a revolution in home brewing allowing home brewers and small micro-breweries a level of control that meets everyone's budget. With the FermZilla you have many of the benefits of a much more expensive stainless conical fermenter but with the additional benefit of being able to see the fermentation process in action and also ferment at pressures up to 2.4bar.
This is an incredible product at an extremely attractive price point in all the different sizes and models.

The FermZilla 27L Tri-Conical can be used in the following ways:
KL25898 ~ Basic Gravity Fermenter - New Brewers
KB07201 ~ Pressure Brewing Kit - Most Popular
KB07249 ~ Hop Bong Pressure Kit - For Intermediate Brewers
KB07297 ~ Glycol Twister Pressure Brewing Kit - Glycol Obsessed*(We recommend fermentation fridges/chambers over glycol chilled)

If you want to fit a thermowell to the lid of this fermenter then you should really check out the Gen3 60cm Stainless Thermowell Kit that includes the bulkhead fitting so you can mount this into the lid of this Fermenter.
That way you can take a core reading and control your ferment with a RAPT Fermentation Controller or the MKII Temperature Controller.

What's new the difference between Gen2 and Gen3?
1. Moulded 3 inch tri clover ferrule in the body of the FermZilla tank
2. 3 inch Tri-Clover Butterfly Valve
3. 3 Inch Tri-Clover 600mL Collection Container

Is it easier to clean / take apart than the Gen2?

YES, It is by far the easiest Conical PET fermenter to disassemble and clean into all the nooks and crannies. Simply release all pressure inside the vessel and detatch the tri clover clamps.

What does the starter kit come with?
1 x 27L Conical FermZilla Tri-Conical Base Kit (unassembled)
      1 x 27L Gen3 Tri-Conical Tank with metal neck ring
      1 x Standard Top Lid, with Red PRV (35psi) [2 x Male PCO1881 Cap Threads] [Up to 4 drill ports for accessories]
      1 x Collar Lid Ring
      1 x Grommet PCO1881 Black Cap + 1 x Blank PCO1881 Black Cap for lid
      1 x Premium 3 Piece Airlock
      1 x 3 inch tri clover to 3 inch tri clover Butterfly Valve
      1 x 600mL Collection Container & Lid* [2 x Male Cap Threads]
      2 x Blank PCO1881 Black Cap
      1 x 3 piece ~ 3 inch tri clover clamp [+ 1 x 3" Beaded Silicone Seal]
      1 x 2 piece ~ 2 inch tri clover clamp [+ 1 x 2" Beaded Silicone Seal]
      1 x Stainless Stand with swing handles
      1 x Stainless Steel Handle Assembly
      1 x Strip Stick On Thermometer
      1 x Level indicator sticker (Litres and Gallons)
      1 x Spare Lid O-Ring
      1 x Spare Collection Container O-Ring

Instructions:
To download the instruction sheet for this product click on the link below:
FermZilla 27L - Tri-Conical PDF Instruction Manual

Warnings:
Please read the instructions thoroughly before use. We will not be held liable for misuse or mishandling of the unit contrary to the instructions.
Keeping the units out of direct sunlight is a must for all PET fermenters. Sunlight degrades PET. 
Do not expose to temperatures exceeding 35°C and pressure ferment past 5psi at these temperatures.

Please note:
When using this vessel under pressure. You must perform a water pressure check to ensure your connections are leak proof before you fill the fermenter every time. To do this. Fill your FermZilla up with some water, then apply a minimum of 15psi pressure to the vessel. Check for leaks around all Cap / Threads by tipping it upside down, in all directions where there are risks of leakage. 

Occasionally these units may come with some small indentations/dimples/dents from shipping, this is just a reality of shipping large blow-moulded thin-walled vessels. But don't panic, these fermenters are designed to endure minor deformations such as this. This was a necessary implementation into the design so that they can withstand some accidental suction from cold crashing and rough handling in transit without compromising their integrity and ability to endure high pressures. All small dents will push out and settle with use and positive pressure and are only an issue and warrant replacement in the rare event they start to show white stress patterns or have damaged the plastic.

A replacement lid for the 30 litre heated fermenter. Lids crack, warp or simply disappear, and a fermenter without one is not much use to anybody.

This is the 30 litre heated fermenter lid. Check the diameter and the fitting on your vessel before ordering, since two fermenters of the same nominal volume are not always the same shape. Send us a photo and we will confirm.

Original replacement Oring for brewing Fermenter 15 lt, 30 lt, and 60 lt. Manufactured for food-grade applications. Crafted and joined for a perfect fit.
This high-quality oring ensures an improved airtight seal, reducing leaks, maintaining optimal fermentation conditions, and guaranteeing a hassle-free brewing process. A simple push on installation.

Australian made, using premium rubber material. This O-ring is cut and joined to suit the AMPI design lid.

Not only does this O-ring provide practical functionality, but it also ensures a hygienic environment for your brewing process. Easy to clean and maintain, it meets the highest standards of cleanliness, essential for the production of top-quality beverages.

Approx. specs:

• Inner Diameter: 22.5 cm
• Thickness: 8 mm

Spare Plastic lid for Plastic Fermenters with airlock hole.

Suitable for 30 Lt and 60 Lt Plastic Fermenters.

O-rings need to be purchased separately.

Please note that the colour of the item may vary from batch to batch, as the manufacturer may change it without notice.

Spare Plastic lid for Plastic Fermenters with airlock and heater hole.

Suitable for 30 Lt and 60 Lt Plastic Fermenters

O-rings need to be purchased separately.

Please note that the colour of the item may vary from batch to batch, as the manufacturer may change it without notice.

It has a built-in Dual laser that can be switch On and Off, Dual laser is an important feature when choosing infrared thermometers because it allows for much higher accuracy of readings, when measuring an object a Dual Laser will help you greatly in finding the convergence point of the measured target and spot ratio this can only be achieved with Dual Laser.

Features:
• Double Laser pointer for accurate target aiming
• Simple one-handed operation
• Laser ON/OFF Switch
• Low battery indication
• LED backlight system for operation under poor illumination
• C° / °F temperature unit conversion
• Automatic Power off in 15 seconds without any operation
• Display hold, Scan function

Note:
1. When using this product to measure temperature, consider the ratio between the distance (the length from the product to the measured object) and the size of the measurement area, referred to as the object distance ratio. When the distance between the product and the measured object increases, the measurement area will increase accordingly.

2. If you want to use boiled water to measure the quality of the product, please note that when measuring boiling liquids, do not allow smoke or water vapor to contact the temperature sensing area, and keep the measurement angle at 45 ~ 60 degrees.

- FCC,CE,ROHS Certified