Fermenters & Accessories

Easily connect a 19mm white drum tap with this tap reducer. Simplify your plumbing needs and add convenience to your daily life.

This is for the frame only with 4 gauge and 19mm horsetail outlet. Made for filtering food in a natural way. Designed with the highest attention to details and built with high-quality materials. It’s completely made out of 304 stainless-steel, to guarantee high hygiene and durability. Composed of linear nylon plates where the filtering layers are to be placed.

The pump works with 20 filtering layers but it possible to use more or fewer filters, changing the hourly production. There’s a gauge to control the pressure and a fluid control valve. Quick to assemble, immediate filtering layers replacement and minimal waste.

This is for the frame only with gauge and 19mm horsetail outlet.

Made to filter in a natural way and with highest quality materials such as AISI 304 stainless-steel, to guarantee high hygiene and durability.

Composed of linear nylon plates where the filtering layers are to be placed.

Features
plates 20
dimension cartons 20×20 cm
filter surface 0,8 m²
hourly production 700:1200 l/H
Suits electric motor hp 0,5

This flat rubber seal O-ring is designed for white plastic tank airlocks. It provides a reliable, airtight seal for variable-capacity tank floating lids, ensuring secure containment and preventing leaks. Ideal for maintaining tank integrity and enhancing performance in various applications.

Approximate Dimensions

• Inner Diameter: 42 mm
• Outer Diameter: 56 mm 

Customer Notice

Please note that the item's colour may vary from batch to batch, as the manufacturer may change it without notice. The function will remain the same 

A nickel plated Algor ball valve, 1 inch, 25mm, BSP male inlet to 1 inch, 25mm, DIN male outlet, with a quarter turn lever handle.

Sold individually. DIN and BSP fittings do not swap over, so it pays to check what is already on your tank. Send us a photo of the outlet you are connecting to and we will confirm this valve suits.

Ferrari tap number 5, reference FE08, a wooden taper shaft from 32 to 41mm in diameter, 29cm long, with a cork inner. Listed by Ferrari for use on oak barrels.

It is the largest of the wooden taps in this set. Measure your bung hole across the range before you order, and send us the figure if you would like it checked.

An Algor stainless steel ball valve, 1 inch, 25mm, BSP male inlet to 1 inch, 25mm, DIN male outlet.

The supplier's title trails off at the end, so there may be a further detail we cannot confirm from the listing alone. Sold as one valve. Ask us before ordering and we will look at the valve on the shelf and tell you exactly what it is.

An Italian stainless steel barrel tap with a parallel 1/2 inch BSP thread. Parallel, not taper, so it wants a matching threaded fitting rather than being driven into timber.

Sold as a single tap. The other barrel taps we carry are taper thread, so check which your barrel is set up for. Send us a photo if you would like us to identify it.

A super clamp with a 44 to 47mm clamping range. Heavier duty than a worm drive clamp, and it holds a hose onto a barb properly when there is pressure behind it. Sold as a single clamp. Measure the outside diameter of your hose over the barb and make sure it lands inside the 44 to 47mm range, or bring it into Epping and we will check.

Used on all of our AlcoEngine range for use with both Reflux and Pot stills on boiler lids and 2 inch reduced Kegmenters.

Dimensions:

59mm OD-Diameter 
47mm ID-Diameter
2mm Thick
Cross section 2mm x 6.5mm

The Funnel Plastic 15cm Diam Ferrari with Filter Rest is designed to make your pouring and filtering tasks seamless. Its wide diameter of 15cm allows for easy transfer of liquids, while the filter rest ensures a clean and mess-free process. A must-have for any kitchen or workshop.

A white plastic hosetail with a bend, made to suit a 25mm male DIN stainless ball valve with a female nut. It gives you a neat, angled connection for running hose off your valve. A handy fitting for tidying up transfers around the brewery or cellar.

We recommend the use of this product with StellarClean for cleaning and StellarSan for sanitising.

The Bucket Blaster is a great way to get your kegs, fermenters, fermzilla, carboy's or other brewery gear clean while you attend to other tasks.

Simply set up the keg washer basin with your cleaner or sanitiser, set a keg or carboy on over the jet nozzle, power up pump and let the keg washer do the work. 

This unit comes with a 15L bucket which doubles as a storage container when you are not using the system.  Some other keg washers come with a very small reservoir making it a pain to move, liquid spils over the sides easily and generally they just do not work as well.  This unit has a large 15L bucket making it much less likely for you to spil liquid on your floor.

This system includes a 2000liter per hour pump, the 15L bucket, a powerful jet nozzle, 3/8 EVABarrier tubing, a duotight tee piece, a grey and black ball lock disconnect and the stainless stand.  Some other keg washers have the ball lock disconnects and tee piece sold separately but this is included in the kit.

Bin liner bags for an 80 litre bin, 50 to a pack, made by SSS in Italy. Liners turn the clean up after a crush or a processing day into lifting a bag out rather than scrubbing the bin down.

Fifty in a pack sees most people through a season. Confirm your bin is 80 litre capacity so the liner sits properly over the rim.

The COLOMBO Rover wine Filter pump is made up of a special electric pump and a filtering system called liquid system with pressed sheets. This particular type of filtering allows to obtain excellent levels of purification of the drinks without altering the fundamental characteristics of the decanted liquid; for this reason it is particularly appreciated for domestic filtering, but also in the professional sector, such as wine cellars, pharmaceutical factories, laboratories, breweries; in short, wherever it is necessary to filter a drink to be able to serve it or bottle perfectly clear and without any trace of unwanted residues. 

HOW WORKS: It is particularly suitable for filtering wine, water, infusions, beers, pharmaceutical solutions, perfumes. It does not require any particular maintenance if not a normal cleaning. Filtering is the last step in the production of wine and requires knowledge of some fundamental precautions. A young wine (30 days) is not ready for fine filtering. By following our instructions you will find the right way to achieve a good filtering with the COLOMBO Rover wine filter pump.
For best results, the wine should be aged at least two or three months and brought to room temperature before filtering. During this time the wine takes shape and allows the majority of suspended parts to settle. At this point, use the COLOMBO Rover wine filter pump to finish the wine. If a superior finish is desired, use the rinse aid filters. Remember to wait between two and four days between one filter and another. If, on the other hand, you want to filter a young wine (30 days), you must always use a rough filter first; immediately after you can use a filter for finishing. During filtering, young wine is made agitated by the presence of CO2 (carbon dioxide) created during fermentation; wait a few hours before bottling the wine.

WHAT LIQUIDS CAN HANDLE: It is possible to use the pump to transfer any type of clean liquid in common use, which must not be chemically aggressive or abrasive. Some examples: water, wine, milk, vinegar, low viscosity oily solutions, neutral fluid detergents, diesel.

SERVICE: Normal maintenance requires few and simple interventions, as if it were a normal household appliance. After use, pour clean water to rinse the internal surfaces of the pump. The electric motor requires no maintenance, there are no parts to lubricate. The external parts must be cleaned with a slightly damp sponge, and then dried immediately with a cloth.

An Italian made sample tap valve in 316 stainless steel with a 3/8 BSP thread, for a wine tank. It lets you draw a small sample without opening anything up.

Sold as one valve. If your tank boss is a different thread then this will not go in, so send us the size and we will check before anything ships.

These Nickel-plated brass barrel taps are suitable for larger barrels 25 litres and up. With a ball valve for easy use and a tapered thread from 19-23mm in diam to make sure it screwed tight and that there is no leaks 

Overall specs of the Tap:

Overall length (not including red handle) 150mm

Length of thread 50mm

Smallest part of taper 19mm

Tapering up to 23mm

The Fermzilla Yellow O-ring, with a 4-inch diameter, is designed to perfectly fit Gen 3 Pressure lids and 2-inch TC Pressure Lids, ensuring a reliable airtight seal for your fermentation vessels.

Crafted for durability and effective pressure maintenance, this gasket helps prevent leaks, maintaining optimal conditions for your brewing process. Ideal for replacing worn seals, it supports consistent fermentation performance and preserves the integrity of your setup.

Suitable for any 19L, 9.5L and 2L Corny Keg in either ball lock or pin lock.

What is Low2?
Low2 O-Rings are the new golden yellow standard of homebrew kegs. Because of their unique composition (Synthetic M-Class and Cross-Linked Elastomers), they have superior oxygen barrier properties than that of the previus O-Rings (Silicone). This results in your beverage staying fresher for longer.