New Customers get 5% OFF
Fast Shipping
Expert Advise
New Customers get 5% OFF
Fast Shipping
Expert Advise
New Customers get 5% OFF
Fast Shipping
Expert Advise
New Customers get 5% OFF
Fast Shipping
Expert Advise
New Customers get 5% OFF
Fast Shipping
Expert Advise
New Customers get 5% OFF
Fast Shipping
Expert Advise
- All categories
Your cart
Built to handle large catalog
Maximize' exclusive deal: After purchasing, you’ll receive: Free theme design & setup and 2 months free access to 200+ advanced sections & templates.
Explore full power of Maximize Theme
Choose your Location
-
Epping
Free
Usually ready for pickup in 24 hours
218 Cooper St, Epping VIC 3076
📞 (03) 9422 1711
🕐 Mon – Fri: 9 am – 5 pm
Sat: 9 am – 1:30 pm
Sun: Closed -
Laverton North Branch
Free
Usually ready in 24 business hours
Unit 2/176-178 Cherry Ln, Laverton North VIC 3026
📞 (03) 9422 1711
🕐 Mon – Fri: 9 am – 3 pmSat: 9 am – 1:30 pm
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
Fermenters & Accessories
A fermenter is just a vessel that keeps wild yeast and oxygen out while your own yeast does its work. What changes between one and the next is the shape, the neck and how easily you can get your arm inside it to clean. That is really the whole decision.
Our Italian glass demijohns come narrow neck and wide neck, both with PVC baskets, and there is a version with a tap and a heavier weaved basket if you would rather draw off than lift. Wide neck is the one to buy if you are fermenting fruit or you know you will be scrubbing. Narrow neck suits wine sitting quietly for months, sealed with a demijohn cap or a bored silicone bung and an airlock. Solid bungs are for when the ferment has finished. Smaller batches sit happily in a gallon jar with a swing clip closure. Brass taps to suit an 11 to 13mm opening and Rigamonti Casalinghi jar funnels make transfers less of a wrestle.
Worth knowing before you order: fit the bung to the neck, not to the airlock. Necks vary between Italian demijohns more than people expect, so measure across the inside of the opening or bring the vessel in and we will match it.
We are at Laverton North and Epping. Also see Glass Demijohns, Airlocks & Spunding Valves, Beer Brewing and Wine Making.
482 products
482 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$2.00 AUD
A silicone ribbed seal for tri clover ferrules, giving you a clean, food safe seal that handles heat well. Silicone lasts longer than standard rubber and will not taint your brew or spirit. A simple consumable worth buying a few of at a time.
$1,250.00 AUD
A 300 litre TABEC tank from Minox with a conical base and welded legs, set up for olive oil storage. The conical base lets you draw off cleanly from the bottom and leave sediment behind, which is the whole point when you are storing oil for any length of time. Freight on a tank this size is worth sorting first, so give us a call.
$28.90 AUD
These are the Round Plastic Pails of choice for manufacturers of a varied range of applications, from processed foods, water-based paints, adhesives, and chemicals to pharmaceutical and agricultural products.
An optional tight fitting lid provides an excellent airtight seal, is liquid tight, drop safe and can withstand a high degree of sideways distortion without breaking its seal with the pail rim.
A stainless steel barrel tap valve with a taper thread covering 12 to 17mm. The taper draws tight as it goes in, which is what seals it against the timber.
Sold as one tap. Measure the hole in your barrel before ordering, since the taper range is the whole story. Send us the measurement and we will tell you whether this one suits.
$79.50 AUD
The Stainless Steel Ice Bucket delivers reliable performance, with a generous 13-litre capacity, it keeps your drink station fully stocked without constant refilling. The seamless, heavy-duty stainless steel construction resists rust, cracks, and chips, ensuring years of dependable use in demanding hospitality environments.
An ergonomic handle makes transport effortless and reduces the risk of hand contamination. Ideal for home, restaurants, cafes, bars, and catering operations that demand durability and efficiency.
$8.00 AUD
Graduation volume stickers for the Fermentasaurus conical fermenter, sold by Keg King as an accessory. They let you read the level off the side of the vessel instead of guessing from the top.
Listed for the Fermentasaurus conical. If you are hoping to run them on another fermenter, measure your vessel first or ask us and we will check.
$32.00 AUD
A red plastic lid, 76cm in diameter, to suit the 300 litre tall SSS fermentation vat. It covers your ferment to keep out dust and pests while your wine or must works away. A practical replacement or spare for the home producer.
$85.00 AUD
An oil filled gauge for TEM filters, to suit the 20 x 20 models. Oil filling damps the needle so it settles rather than flicking about with every pulse of the pump, which makes the reading far easier to use.
Made for the 20 x 20 models, so check your filter size first. Bring the old gauge in to Laverton North or Epping and we'll compare the fitting.
$275.00 AUD
A butterfly valve with a 1 inch, 25mm, BSP female inlet and a 1 inch, 25mm, BSM male outlet. Quarter turn from open to shut, which is why they earn their place on tank work.
Sold as one valve. Inlet and outlet run on different thread standards here, so check both ends against your setup, or send us photos and we will confirm it.
$10.00 AUD
A plastic tap with a 10 mm shank for a vinegar acetiera demijohn. Shank size is the whole fit question, so measure the hole in your demijohn before ordering. A straightforward replacement when the original starts to weep, and inexpensive enough to keep a spare. If you are not sure your acetiera takes a 10 mm shank, send us a photo of the existing tap and we will confirm it for you.
$72.00 AUD
Hosetail with nut. Fabricated in Australia.
This particular kit is a one-click option for those who want to be able to brew under pressure with a 55L Tri-Conical FermZilla. Designed as a double batch system that goes perfectly hand in hand with the BrewZilla 65L Gen3.1.1 or Gen4 if you are looking to Brew All Grain or Partial Mash beers.
This kit now includes a 600mL Collection container with a 3 Inch Tri-clover connection that is the gold standard for sanitary design and effortless removal.
This is a very good starting point for those who are just getting into pressurisable fermenters but also want to dabble in yeast harvesting and purged dry hopping. If you would prefer a more simplistic pressurisable fermenter in a similar size, we would very much recommend the 60L All Rounder FermZilla Pressure Brewing Kit. This unit does not have the added collection container / butterfly valve assembly at the bottom.
The FermZilla 55L Tri-Conical can be used in the following ways:
Basic Gravity Fermenter - New Brewers
Pressure Brewing Kit - Most Popular
Hop Bong Pressure Kit - For Intermediate Brewers
Glycol Twister Pressure Brewing Kit - Glycol Obsessed
*(We recommend fermentation fridges/chambers over glycol chilled)
We would also still recommend getting a CO2 Gas to be able to transfer to a keg/bottle/can or dispense directly out of the unit. As these units were designed to be fermenting and pressure transfer vessels for your delicious cargo.
What we have inside this kit is:
- 55L Conical FermZilla Tri-Conical Base Kit (unassembled)
- 2 x Red Carbonation Caps (We use these as Gas posts)
- 2 x-Yellow Yellow Carbonation Caps (For Liquid Posts)
- 1 x Stainless Steel Float with Silicone Dip Tube and Mesh Filter (You will need to cut this to your desired depth)
- 1 x BlowTie Integrated Spunding Valve Kit
- FREE! 0-15psi Integrated Blow Tie Spunding Valve RRP$39.95!
- 1 x duotight 8mm x Gas Ball Lock Disconnect
- 1 x 8mm Rigid Joiner Tube
*The above items cannot be removed / altered within this kit*
The new and improved FermZilla 55L brought to you by the critical key minds and engineers behind the original Gen1 and Gen2. But with all the tweaks that make it the most cost-effective conical fermenter to date!
The new FermZilla is a revolution in home brewing allowing home brewers and small micro-breweries a level of control that meets everyone's budget. With the FermZilla you have many of the benefits of a much more expensive stainless conical fermenter but with the additional benefit of being able to see the fermentation process in action and also ferment at pressures up to 2.4bar.
This is an incredible product at an extremely attractive price point in all the different sizes and models.
What's new the difference between Gen2 and Gen3?
1. Moulded 3 inch tri clover ferrule in the body of the FermZilla tank
2. 3 inch Tri-Clover Butterfly Valve
3. 3 Inch Tri-Clover 600mL Collection Container
Please note:
When using this vessel under pressure. You must perform a water pressure check to ensure your connections are leak proof. To do this. Fill your FermZilla up with water, then apply a minimum of 15psi pressure to the vessel. Check for leaks around all Cap / Threads.
Occasionally these units may come with some small indentations/dimples/dents from shipping, this is just a reality of shipping large blow-moulded thin-walled vessels. But dont panic, these fermenters are designed to endure minor deformations such as this. This was a necessary implementation into the design so that they can withstand some accidental suction from cold crashing and rough handling in transit without compromising their integrity and ability to endure high pressures. All small dents will push out and settle with use and positive pressure and are only an issue and warrant replacement in the rare event they start to show white stress patterns or have damaged the plastic.
Warnings:
Please read the instructions thoroughly before use.
Keeping the units out of direct sunlight is a must for all PET fermenters. Sunlight degrades PET.
Do not expose to temperatures exceeding 35°C and pressure ferment past 5psi at these temperatures.
Please note:
When using this vessel under pressure. You must perform a water pressure check to ensure your connections are leak proof before you fill the fermenter every time.
To do this. Fill your FermZilla up with some water, then apply a minimum of 15psi pressure to the vessel. Check for leaks around all Cap / Threads by tipping it upside down, in all directions where there are risks of leakage.
Occasionally these units may come with some small indentations/dimples/dents from shipping, this is just a reality of shipping large blow-moulded thin-walled vessels. But don't panic, these fermenters are designed to endure minor deformations such as this. This was a necessary implementation into the design so that they can withstand some accidental suction from cold crashing and rough handling in transit without compromising their integrity and ability to endure high pressures.
All small dents will push out and settle with use and positive pressure and are only an issue and warrant replacement in the rare event they start to show white stress patterns or have damaged the plastic.
$99.00 AUD
$18.15 AUD
A super clamp with a 60 to 63mm clamping range, for mid size transfer hose. Heavier construction than a standard worm drive clamp, which matters once there is pressure in the line. Measure the outside diameter of your hose with the fitting seated inside it and check the figure falls inside the 60 to 63mm range before ordering. We carry other sizes if it does not.
From $42.00 AUD
$4.50 AUD
A nickel plated brass hosetail for Rover fittings, with a 14mm barb and a 19mm female nut. Screws on, clamps up, done.
It suits the Rover fitting named in the title and nothing wider, so match it against the thread on your pump or hose before ordering. We keep these in the fittings drawer at Laverton North and Epping if you would rather compare in person.
$18.00 AUD
A 1000ml collection bottle with lid to suit your FermZilla conical fermenter, for catching yeast and trub as it drops. Twist it off, tip out the sediment, and your beer keeps clearing without a full transfer. A handy spare or replacement for pressure fermenting the easy way.
$22.00 AUD
A tank pump gauge reading 0 to 1.6 bar, with a small 9 mm male fitting. The gauge is what tells you whether the seal on a variable capacity lid is actually holding pressure, and they do let go quietly. Fitting size here is 9 mm male. Check what is on your pump before ordering, or send us a photo of the fitting, or bring it into Laverton North or Epping.
$12.90 AUD
Code: 130369
3 lt
D: 25mm
PURE COTTON FILTER
For twist funnel
$6.90 AUD
A white plastic hosetail with a bend, made to suit a 32mm male DIN stainless steel ball valve, with a female nut. The bend turns the hose down without kinking the line.
Sold as the hosetail. It suits that 32mm DIN valve, so if yours is a different size or standard, send us a photo and we will tell you what you need.
$6,361.97 AUD
A 3000 litre sloping base variable capacity tank in 304 stainless with a 32 x 45 door, two valves, a sample tap and a volume indicator. At three thousand litres the sloping base keeps the overall height down compared with a cone, which matters if your ceiling does not cooperate. Algor. Ask us for the full spec and we will work out freight and access with you before you order.
Fermentasaurus Grainary Dispenser is ideal for storing, dispense and display malt and grains at any time.
The grainary valve allows dispensing the grain easily. It is an alternative way to keep using your Fermentasaurus Tanks after they are retired from use. Reuse and repurpose your tank easily with the grain valve that never clogs. You'll be saving the environment by not wasting your PET Tank.
It is a clear PET body. Grain is not included.
Specifications
- Made from high strength PET
- Fermenter Volume: 35L
- Frame: 304 Stainless Frame
- Black lid top
- Adjustable bottom valve Dispenser. That e easily assembles and attaches 35L and 60L PET pressure fermenter tanks.
- Reliable, controllable dispensing
- Built-in valve handle
- Perfect for in-store gain displays
- Dimensions: Height: 870mm and Diameter: 380mm
$239.00 AUD
The Fermenter King 60L, a plastic PET conical uni tank with a CO2 pressure lid. The conical base lets you drop trub and yeast out the bottom instead of racking off it, and the pressure lid means ferment and carbonate happen in the same vessel.
Sixty litres is a solid batch. Talk to us at Laverton North or Epping about the fittings and gas setup you'll want alongside it.
$80.00 AUD
$11.00 AUD
$75.00 AUD
Hose in 100mm diameter. This listing gives the diameter only, with no material, wall thickness or length stated on the page, so we would rather you asked than guessed. Tell us what you are pumping and how long a run you need and we will confirm the full spec and the price for your length before you order. Available through Laverton North and Epping.
Introducing our Cylinder Stainless Steel Tank, featuring a durable 18/10 stainless steel construction for superior strength and anti-corrosive properties. Complete with a chrome dust lid, this tank is both functional and stylish. Say goodbye to pitting and enjoy long-lasting quality.
$1,590.00 AUD
The 20x20 plate filters of the Jolly series are made of AISI 304 stainless steel, and the plates are made of food safe plastic material; in standard moplen or noryl on request. They have been designed to clarify and sterilise olive oil and wine.
The TEM Plate Frame Filter includes 6 filter pads, designed for efficient filtration. It comes equipped with an Ebara pump mounted on wheels for easy mobility and stainless steel fittings with 19mm BSP connections, ensuring durability and reliable performance in various filtration applications.
The standard models are fitted with stainless steel pump with noryl plastic impeller. All models can be fitted with a stainless steel plate for double filtration a variable filtration, and a cartridge for micro filtration.
See all our wine filters, filter pads and cartridges.
$2,390.00 AUD
The 20x20 plate filters of the Jolly series are made of AISI 304 stainless steel and the plates are made of food safe plastic material; in standard moplen or noryl on request. They have been designed to clarify and sterilise olive oil and wine.
The standard models are fitted with stainless steel pump with noryl impeller. On request it is possible to have a coaxial pump and rubber impeller (nbr). All models can be fitted with stainless steel plate for double filtration and variable filtration and cartridge for microfiltration.
See all our wine filters, filter pads and cartridges.
From $1.00 AUD
- Bottom Diameter: 19 mm
- Head: Diameter: 28 mm x Height: 10 mm
Showing 120/482
- Choosing a selection results in a full page refresh.
- Opens in a new window.