Beer · Australian dark ale

Tooheys Old-Style Dark Ale

A smooth, malty Australian dark ale in the style of Tooheys Old, with roasty notes and a gentle Goldings finish.

Batch
23 L
ABV
Approx. 4.4%
Difficulty
Beginner
Style
Australian dark ale
Fermentation
7 days
Supplier recipe · Morgan's Brewing Recipe Chart
Tooheys Old-Style Dark Ale
Shop this recipe

Everything you need

Ingredients for this batch are ticked. Untick anything you already have.

Ingredients for this batch
Beer kit
Morgans Australian Old Brew Extract
Morgans Australian Old Brew Extract — 1.7 Kg Recipe requires 1.7 kg · Buying 1 × Morgans Australian Old Brew Extract — 1.7 Kg
In stock $20.95
Malt & sugars
Brew Cellar Ultra Blend Mix 1kg
Brew Cellar Ultra Blend Mix 1kg — 1 Kg. Recipe requires 1 kg · Buying 1 × Brew Cellar Ultra Blend Mix 1kg — 1 Kg. We stock Brew Cellar Ultra Blend as the in-store equivalent of Morgan's Ultra Blend.
In stock $11.50
Hops
Morgans Finishing Hops Goldings
Morgans Finishing Hops Goldings — 12 g Recipe requires 1 packet · Buying 1 × Morgans Finishing Hops Goldings — 12 g Follow the instructions on the hop pouch.
In stock $4.50
Yeast
Morgans Premium Ale Yeast 15g
Morgans Premium Ale Yeast 15g — 15 g Recipe requires 1 sachet · Buying 1 × Morgans Premium Ale Yeast 15g — 15 g Use in place of the yeast supplied with the tin.
In stock $6.95

Method

11 steps

Brew day

  1. Clean and sanitise. Clean and sanitise your fermenter, lid, airlock, tap, spoon and hydrometer.
  2. Soften the tin. Stand the sealed Morgan's Australian Old tin in hot water for about 10 minutes so the malt pours easily.
  3. Dissolve the tin and sugars. Pour about 2 litres of just-boiled water into the fermenter. Add the tin contents and the 1 kg Morgan's Ultra Blend, and stir until fully dissolved.
  4. Top up to 23 litres. Top up with cold tap water to the 23 litre mark and stir well. Aim for 18–22 °C.
  5. Take a gravity reading. Write down the hydrometer reading. This is your original gravity (OG). ABV calculator
  6. Pitch the yeast. Sprinkle the Morgan's Premium Ale Yeast over the surface, in place of the yeast supplied with the tin.
  7. Add the finishing hops. Add the Goldings finishing hops as directed on the pouch.

Tip: Don't pitch into wort warmer than 25 °C. It stresses the yeast and can cause off-flavours.

Fermentation

  1. Seal and ferment. Fit the lid and airlock and keep the fermenter at 18–22 °C, out of direct sunlight.
  2. Check it has finished. Fermentation usually takes 7–10 days. When the hydrometer reading is the same two days in a row, it's ready to bottle.

Tip: Only bottle once the gravity is stable. Bottling too early can over-carbonate the beer and burst bottles.

Bottling

  1. Prime and fill. Add carbonation drops or measured dextrose to clean, sanitised bottles, fill to about 3 cm from the top and seal. Priming sugar calculator
  2. Condition and enjoy. Store upright at 18 °C or warmer for at least 2 weeks, then chill before serving.

Tip: Kegging instead? Add an extra 200 g of dextrose on brew day to keep the alcohol on target for a 23 litre batch.

Make it your own

Everyone brews a little differently, and that's half the fun. Use this recipe as a starting point, then adjust it to suit your taste: a little more or less sugar for strength, a different hop for aroma, or a warmer or cooler ferment.

Serve it a little warmer than a lager, around 8 to 10 °C, to bring out the roasted malt. Write down what you changed so your next batch turns out just the way you like it.

Safety information

Only bottle once the hydrometer reading is the same two days in a row. Bottling before fermentation has finished builds up too much pressure and can burst glass or PET bottles. Store bottles where a failure can't hurt anyone, and drink responsibly.

0 selected