Essedue

Essedue Part (08) - Indexing Cam Plastic. Suits model 220AFP / 250af (p25) Slicer

Approximate Dimensions

• Internal Diameter: 11 mm
• Outer Diameter: 55 mm 

Customer Notice

Please note that spare parts may occasionally vary in design, materials, or features depending on updates made by the manufacturer. These changes can occur without prior notice, but they do not affect the compatibility or performance of the part.

Upgrade your Essedue slicer with our high-quality replacement blades, designed to handle a wide variety of slicing tasks with ease.

Features

• Serrated Blades: Featuring multiple sharp teeth, these blades are ideal for cutting hard-crusted bread, fibrous foods, tough cuts of meat, and thick cheeses effortlessly.
• Variety of Sizes: Available in multiple sizes to suit different slicing needs (195 mm, 220 mm, and 250 mm).
• Compatibility: These blades suit Essedue slicers, but also compatible with many other European meat and deli slicers 

Customer Notice

Please verify that this product is compatible with your equipment before purchasing. We recommend checking your model specifications to ensure a proper fit.

The rubber drive belt that turns the blade on Essedue slicers, listed as suiting the 195 through to the 300. A glazed or stretched belt shows up as a blade that bogs down in dense smallgoods.

The stated fit is the Essedue 195 to 300 range only. Check the model number on your machine before ordering this one.

Essedue Part (24)- Guard Clear Plastic Perspecs. Suits 195 to 300 Essedue

Upgrade your Essedue slicer with our high-quality replacement blades, designed for precise and effortless slicing.

Features

• Standard Blades: Perfect for slicing ham and cured meats into thin, uniform slices without shredding. Razor-sharp for optimal performance.

• Variety of Sizes & Finishes: Available in multiple sizes and finishes (195 mm, 350 mm) to suit different slicing needs.

• Compatibility: Designed specifically for Essedue meat and deli slicers. It can also compatible with many other European meat and deli slicers.

Customer Notice

Please verify that this product is compatible with your equipment before purchasing. We recommend checking your model specifications to ensure a proper fit.

The graduated thickness control knob for Essedue slicers, listed as suiting the 250AF and the 300e. It is the dial you turn to set the slice, and a worn or cracked one makes consistent cutting guesswork.

Fit is stated for those two models only. Check that your machine's plate reads 250AF or 300e before ordering.

Customer Notice

Please note that spare parts may occasionally vary in design, materials, or features depending on updates made by the manufacturer. These changes can occur without prior notice, but they do not affect the compatibility or performance of the part.

The Slayer Slicer Blade delivers precision cutting for artisanal bread with its 300mm serrated edge. Engineered for clean, even slices without crushing the crumb, this blade is essential for bakeries and serious home bakers.

The serrated design grips and cuts through crusty loaves with minimal effort, preserving the delicate interior structure. Durable stainless steel construction ensures long-lasting performance and easy maintenance. A professional-grade tool for consistent results every time.

<p>Code: 127305</p>
<p>Spare Teflon coated blade for Essedue 250 slicer.</p>

An Essedue table adjustment assembly, complete and in alloy. It is the mechanism that sets slice thickness, so when the adjustment goes sloppy this is the part behind it.

The part number is blank on this listing and no slicer model is named, so it is worth ringing us with your machine details before ordering, and we will check it against the parts diagram.

Essedue part 18-19, the slide bar supplied with its plate, listed to suit the 300E slicer. Buying the two together saves the fiddle of matching a new bar to a worn plate.

Listed for the 300E. Other models in the Essedue range take their own bars, so check the plate on your machine before ordering.

Essedue part 13, the movement kit, an alloy assembly for the 300E slicer. It covers the carriage movement, which is the part of the machine that gets the most work and the most wear.

Listed for the 300E. The rest of the Essedue range uses different assemblies, so confirm your model before ordering and we will double check it.

Essedue part 00, a complete sharpener assembly in polished alloy. Supplied built up, so if the stones, mounts and housing have all worn together it saves piecing the repair out.

The listing does not tie it to a particular Essedue model, so ring Laverton North or Epping with your slicer details and we will check the assembly against it first.

Essedue part 23, the front medium stone for the sharpener, listed to suit the Essedue 350. Stones are a wear item and a glazed one will never bring an edge back no matter how long you run it.

This is the 350 version. There is a separate medium stone listed for the 300, so check your model number before ordering.

A 250mm blade with a smallgoods edge, ground for cured meat rather than bread or vegetables.

Note the title calls it Slayer while the vendor field says Essedue, so the listing does not agree with itself on the brand. Blade diameter and mounting differ between machines, so give us your slicer details and we will confirm this is the right fit before you order.

Essedue part 11, a P25 AC motor, 240V and 0.13kW, listed to suit the 195AF slicer. It is the complete motor rather than a component of it, so it is the answer when the windings have gone rather than a capacitor or a switch.

Listed for the 195AF only. Confirm your model with us before ordering something this substantial.

Essedue part 9, the oval power switch, listed to suit the 250 and 300AF slicers. Switches in a wet, daily wash down environment do not last forever, and a sticky one is worth changing before it fails mid service.

Listed for the 250 and 300AF. Check your model plate before ordering, and ask us if the switch on yours looks different.

Essedue part 12, an 8 microfarad capacitor, listed to suit the 220AF slicer. Capacitors fail quietly and the symptom is usually a motor that hums without turning over.

The 220 and 250AFP take a 6.3 microfarad capacitor instead, so read the value off your old one before ordering. We can check it for you at Laverton North or Epping.

Essedue part 17, the square slide bar for the 220AF slicer. It guides the carriage, and once it has worn the carriage starts to rock and your slices go uneven.

This is the square bar for the 220AF specifically. The 220AFP takes a different bar, so check the model plate on your machine and confirm with us if you are unsure.

Essedue part 12, a 6.3 microfarad capacitor, listed to suit the 220 and 250AFP slicers. A failed capacitor is the usual reason a slicer hums but will not start, and it is a cheap part to rule out.

Note there is a separate 8 microfarad capacitor listed for the 220AF, so check the rating printed on the one you are removing.

Essedue part 32, the bolt that retains the blade guard, 195mm long and 6mm, with a plastic grip knob. The knob means it comes off by hand at cleaning time rather than needing a spanner.

The listing does not name a slicer model for this one, so measure the bolt you are replacing and check it with us at Laverton North or Epping before ordering.

Essedue part 19, the slide bar, listed to suit the 220AFP slicer. The slide bar is what carries the carriage across the blade, and a worn or bent one shows up as a wobbly, uneven slice.

Listed for the 220AFP. The other Essedue models use their own bars, so check the plate on your machine before ordering.

Essedue part 23, the medium sharpening stone, listed to suit the Essedue 300. It works with the large stone in the sharpener assembly, so it is worth checking both when you are replacing one.

This one is listed for the 300 only. There is a separate medium stone listed for the 350, so confirm your model before ordering.

Essedue part 02, the large sharpening stone, listed to suit Essedue 300 to 350 slicers. Sharpening stones wear down with use, and a tired stone will polish a blade without ever putting an edge on it.

Listed for the 300 to 350 range. Quote your model number when you order so we can check it against the part.

Essedue part 30b, the plastic handle for the push plate, listed to suit the Essedue 300 through to 350. It is the handle you hold while feeding product across the blade, so a cracked one is worth replacing straight away.

Fits the 300 to 350 machines as listed. Check the number on your slicer before ordering and we will confirm it.