Beer · Australian golden ale

James Squire Golden Ale-Style Ale

A smooth, golden ale in the style of James Squire Golden Ale, with a fruity, floral Amarillo dry hop.

Batch
23 L
ABV
Approx. 4.6%
Difficulty
Beginner
Style
Australian golden ale
Fermentation
10 days
Supplier recipe · Morgan's Brewing Recipe Chart
James Squire Golden Ale-Style Ale
Shop this recipe

Everything you need

Ingredients for this batch are ticked. Untick anything you already have.

Ingredients for this batch
Beer kit
Morgans Premium Blue Mountain Lager
Morgans Premium Blue Mountain Lager — 1.7 Kg Recipe requires 1.7 kg · Buying 1 × Morgans Premium Blue Mountain Lager — 1.7 Kg
In stock $23.50
Malt & sugars
Morgans Master Malts Beer Enhancer Extra Pale 1.5kg
Morgans Master Malts Beer Enhancer Extra Pale 1.5kg — 1.5 Kg Recipe requires 1.5 kg · Buying 1 × Morgans Master Malts Beer Enhancer Extra Pale 1.5kg — 1.5 Kg
In stock $16.90
Hops
Hop Pellets Amarillo
Hop Pellets Amarillo — 25 g Recipe requires 12 g · Buying 1 × Hop Pellets Amarillo — 25 g About 12 g from a 25 g pack. Dry hop on day 4.
In stock $4.90
Yeast
Morgans Premium Ale Yeast 15g
Morgans Premium Ale Yeast 15g — 15 g Recipe requires 1 sachet · Buying 1 × Morgans Premium Ale Yeast 15g — 15 g Use in place of the yeast supplied with the tin.
In stock $6.95

Method

11 steps

Brew day

  1. Clean and sanitise. Clean and sanitise your fermenter, lid, airlock, tap, spoon and hydrometer.
  2. Soften the tin. Stand the sealed Morgan's Blue Mountain Lager tin in hot water for about 10 minutes so the malt pours easily.
  3. Dissolve the tin and sugars. Pour about 2 litres of just-boiled water into the fermenter. Add the tin contents and the 1.5 kg Morgan's Master Malt Extra Pale, and stir until fully dissolved.
  4. Top up to 23 litres. Top up with cold tap water to the 23 litre mark and stir well. Aim for 18–22 °C.
  5. Take a gravity reading. Write down the hydrometer reading. This is your original gravity (OG). ABV calculator
  6. Pitch the yeast. Sprinkle the Morgan's Premium Ale Yeast over the surface, in place of the yeast supplied with the tin.

Tip: Don't pitch into wort warmer than 25 °C. It stresses the yeast and can cause off-flavours.

Fermentation

  1. Seal and ferment. Fit the lid and airlock and keep the fermenter at 18–22 °C, out of direct sunlight.
  2. Dry hop on day 4. Open the lid and sprinkle the 12 g Amarillo hops onto the surface of the beer. Reseal straight away.
  3. Check it has finished. Fermentation usually takes 10–14 days. When the hydrometer reading is the same two days in a row, it's ready to bottle.

Tip: Only bottle once the gravity is stable. Bottling too early can over-carbonate the beer and burst bottles.

Bottling

  1. Prime and fill. Add carbonation drops or measured dextrose to clean, sanitised bottles, fill to about 3 cm from the top and seal. Priming sugar calculator
  2. Condition and enjoy. Store upright at 18 °C or warmer for at least 2 weeks, then chill before serving.

Tip: Kegging instead? Add an extra 200 g of dextrose on brew day to keep the alcohol on target for a 23 litre batch.

Make it your own

Everyone brews a little differently, and that's half the fun. Use this recipe as a starting point, then adjust it to suit your taste: a little more or less sugar for strength, a different hop for aroma, or a warmer or cooler ferment.

Add a second dose of Amarillo for more orange and floral aroma. Write down what you changed so your next batch turns out just the way you like it.

Safety information

Only bottle once the hydrometer reading is the same two days in a row. Bottling before fermentation has finished builds up too much pressure and can burst glass or PET bottles. Store bottles where a failure can't hurt anyone, and drink responsibly.

0 selected