Beer · Australian lager

Great Northern-Style Lager

An easy-drinking, crisp Australian lager in the style of Great Northern. Made for hot days and cold eskies.

Batch
23 L
ABV
Approx. 4.7%
Difficulty
Beginner
Style
Australian lager
Fermentation
7 days
Supplier recipe · Morgan's Brewing Recipe Chart
Great Northern-Style Lager
Shop this recipe

Everything you need

Ingredients for this batch are ticked. Untick anything you already have.

Ingredients for this batch
Beer kit
Morgans Australian Lager
Morgans Australian Lager — 1.7 Kg Recipe requires 1.7 kg · Buying 1 × Morgans Australian Lager — 1.7 Kg
In stock $20.95
Malt & sugars
1kg Malt Mix Light Brew Enhancer Premium
1kg Malt Mix Light Brew Enhancer Premium — 1 Kg Recipe requires 1 kg · Buying 1 × 1kg Malt Mix Light Brew Enhancer Premium — 1 Kg We stock Malt Mix Light Brew Enhancer as the in-store equivalent of Morgan's Body Blend.
In stock $11.90
Hops
Morgans Finishing Hops Pride of Ringwood
Morgans Finishing Hops Pride of Ringwood — 12 g Recipe requires 1 packet · Buying 1 × Morgans Finishing Hops Pride of Ringwood — 12 g Follow the instructions on the hop pouch.
In stock $4.50
Yeast
Morgans Premium Lager Yeast 15g
Morgans Premium Lager Yeast 15g — 15 g Recipe requires 1 sachet · Buying 1 × Morgans Premium Lager Yeast 15g — 15 g Use in place of the yeast supplied with the tin.
In stock $9.50

Method

11 steps

Brew day

  1. Clean and sanitise. Clean and sanitise your fermenter, lid, airlock, tap, spoon and hydrometer.
  2. Soften the tin. Stand the sealed Morgan's Australian Lager tin in hot water for about 10 minutes so the malt pours easily.
  3. Dissolve the tin and sugars. Pour about 2 litres of just-boiled water into the fermenter. Add the tin contents and the 1 kg Morgan's Body Blend, and stir until fully dissolved.
  4. Top up to 23 litres. Top up with cold tap water to the 23 litre mark and stir well. Aim for 18–20 °C.
  5. Take a gravity reading. Write down the hydrometer reading. This is your original gravity (OG). ABV calculator
  6. Pitch the yeast. Sprinkle the Morgan's Premium Lager Yeast over the surface, in place of the yeast supplied with the tin.
  7. Add the finishing hops. Add the Pride of Ringwood finishing hops as directed on the pouch.

Tip: Don't pitch into wort warmer than 25 °C. It stresses the yeast and can cause off-flavours.

Fermentation

  1. Seal and ferment. Fit the lid and airlock and keep the fermenter at 18–20 °C, out of direct sunlight.
  2. Check it has finished. Fermentation usually takes 7–10 days. When the hydrometer reading is the same two days in a row, it's ready to bottle.

Tip: Only bottle once the gravity is stable. Bottling too early can over-carbonate the beer and burst bottles.

Bottling

  1. Prime and fill. Add carbonation drops or measured dextrose to clean, sanitised bottles, fill to about 3 cm from the top and seal. Priming sugar calculator
  2. Condition and enjoy. Store upright at 18 °C or warmer for at least 2 weeks, then chill before serving.

Tip: Kegging instead? Add an extra 200 g of dextrose on brew day to keep the alcohol on target for a 23 litre batch.

Make it your own

Everyone brews a little differently, and that's half the fun. Use this recipe as a starting point, then adjust it to suit your taste: a little more or less sugar for strength, a different hop for aroma, or a warmer or cooler ferment.

For a mid-strength version, use 500 g of Body Blend instead of 1 kg. Write down what you changed so your next batch turns out just the way you like it.

Safety information

Only bottle once the hydrometer reading is the same two days in a row. Bottling before fermentation has finished builds up too much pressure and can burst glass or PET bottles. Store bottles where a failure can't hurt anyone, and drink responsibly.

0 selected