Olive Curing & Oil Production

A green cone with a 14mm bore for the TEM bench gravity filler nozzle, listed for olive oil. The bore size sets how fast the oil runs, so it needs to match what your nozzle is set up for. It suits the TEM bench gravity filler and nothing else named here. Check the bore on your existing cone before ordering, or ask us and we will confirm.

A stainless steel pourer with a long spout, listed for olive oil and spirits. The longer spout gives you better control over where the pour lands, which matters with oil more than most people expect. A cap is optional and is not included by default. Check the neck of your bottles before ordering, and ask us if you want the cap added.

A pourer for olive oil bottles, with a flip lid that keeps dust out between uses. Made in the USA. It gives you a controlled pour rather than a glug, and the lid means you are not pulling the pourer in and out every single time. Check the neck size of your bottles before ordering a batch of them.

The Holly olive harvesting tool, supplied with a 1.7m pole rake and a 10m battery cable. The shorter pole suits lower trees and closer work where a long reach just gets in the way. The battery itself is not stated as part of this listing. Ask us what is in the box and what power source you will need before ordering so nothing catches you out.

An Italian made nickel plated tank valve with a 12.5mm, 1/2 inch, BSP thread. A straightforward tap for drawing off from a tank, sold as one valve.

We keep good numbers of these, so they are usually on the shelf at Laverton North and Epping. If you need to check the thread against your tank boss, bring it in or send us a photo.

GRIFO “hobby” is a unique food filtering Machine and has an ability to filter extra-virgin olive oil.

Features

• dimension cartons 20×20 cm
• filter surface 0.2 m²
• hourly production 50 l/H
• electric motor hp 0.5

Part of the range for domestic use called “hobby”, but unique in its ability to filter extra-virgin olive oil. Practical and simple in its functioning, the FCH6-OLIO filter has an enameled steel structure, a stainless-steel pump and a rubber impeller.

Equipped with linear nylon plates in which to place the filtering layers. It can work with up to 6 layers, but fewer layers result in a lower hourly production. The filter comes with a manometer for pressure control and a liquid recovery tank.

• These Vacuum fillers have been designed especially for bottling OLIVE OIL and thick fluids.

• Entirely made of AISI 304 STAINLESS STEEL the SPEEDY OIL filling machines fill before the product reaches the pump, which makes work fast and easy

• Production speed will vary depending on the ambient and product temperature, and user speed. 

A spare stainless steel screw top lid for an olive oil tank, 20 cm diameter. Lids get dropped, cross threaded and left off, and a tank without a proper seal is not doing the job it was bought for. This is the 20 cm size. Measure across your tank opening before ordering, or bring the old lid into Laverton North or Epping and we will match it across the counter.

An alloy olive pitter by Incasa with a handy spring return, for popping the stones out of olives and cherries in a flash. The spring opens the jaws for you, so you can work through a bowl quickly with one hand. A neat little tool for the home preserver and cook.