New Customers get 5% OFF
Fast Shipping
Expert Advise
New Customers get 5% OFF
Fast Shipping
Expert Advise
New Customers get 5% OFF
Fast Shipping
Expert Advise
New Customers get 5% OFF
Fast Shipping
Expert Advise
New Customers get 5% OFF
Fast Shipping
Expert Advise
New Customers get 5% OFF
Fast Shipping
Expert Advise
- All categories
Your cart
Built to handle large catalog
Maximize' exclusive deal: After purchasing, you’ll receive: Free theme design & setup and 2 months free access to 200+ advanced sections & templates.
Explore full power of Maximize Theme
Choose your Location
-
Epping
Free
Usually ready for pickup in 24 hours
218 Cooper St, Epping VIC 3076
📞 (03) 9422 1711
🕐 Mon – Fri: 9 am – 5 pm
Sat: 9 am – 1:30 pm
Sun: Closed -
Laverton North Branch
Free
Usually ready in 24 business hours
Unit 2/176-178 Cherry Ln, Laverton North VIC 3026
📞 (03) 9422 1711
🕐 Mon – Fri: 9 am – 3 pmSat: 9 am – 1:30 pm
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
SICO
113 products
113 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$92.00 AUD
A complete 250mm sealing bar, listed as the Premium version. Supplied as a complete bar rather than as separate elements, tape and boards, which is the quicker fix when a bar has had a hard life.
The listing does not name the full machine model, so confirm your machine and bar length with us before ordering and we will make sure it is the right one.
$185.00 AUD
A complete sealing bar for the SICO Premium range, 700mm long. It arrives as a full assembly, so a machine that has been out of action with a failed bar can be back on the bench the same day.
Measure your existing bar to confirm it is the 700mm version before ordering, since the Premium range runs in several widths.
$33.00 AUD
A bar magnet cover plate for the SICO Series 250 Premium. It sits over the magnet on the sealing bar and takes the wear that would otherwise land on the magnet itself.
Made for the Series 250 Premium. Other SICO machines use different bar arrangements, so confirm your model with our team at Laverton North or Epping before ordering this one.
$17.40 AUD
A 2.6 Ohm fuse for the electrical board in SICO vacuum sealers. Fuses go for a reason, so it is worth working out why before you fit a new one.
Listed at 2.6 Ohm for the SICO board. Check the rating marked on the fuse you are replacing, and send us your model number if you would like us to confirm this is the right one.
From $9.90 AUD
Product Overview
The Gasket Seal Spare Part for SICO Vacuum Round Storage lids, are designed for use with tempered glass or stainless steel containers with smooth, even surfaces.
Origin: Made in Italy
Features:
- It comes in three sizes depending on your lid
- Compatible with tempered glass or stainless steel containers with smooth, even surfaces
- Ideal for preserving various foods such as biscuits, salads, meat, fish, sauces, and ready meals
- Suitable for use in the refrigerator and freezer
- BPA-free Tritan™ material ensures safe and durable food storage
- Easy to use with the SICO handle attachment for a quick, efficient vacuum seal
Safety and Material Quality:
- Made from BPA-free Tritan™, providing safe food storage
- Complies with Australian food safety standards
- Impact-resistant and durable for long-term use
Cleaning and Maintenance:
- Dishwasher safe for easy cleaning
- Reusable with proper care
$13.40 AUD
An interruption weld switch for SICO machines. It is the switch that cuts the weld cycle, which is the one you reach for when a bag has gone in crooked and you want to stop the seal part way.
The listing does not name a specific SICO model, so tell us which machine you are working on and we will make sure this is the right switch.
$80.00 AUD
Code: 128961
Replacement or upgrade to SICO vacuum sealing machines. Upgrade from LED indicator to mechanical gauge.
Suits all SICO vacuum sealing machines.
$3.00 AUD
A flat plastic cable fastener clip, 6 by 20mm, stocked as a SICO spare. It is the clip that keeps internal wiring tidy and clear of the element, which matters more than it sounds once things get warm inside the case.
Sizes vary, so check the clip you are replacing against the 6 by 20mm measurement before you order.
$3.30 AUD
A blue plastic cap with O ring, 5cm, for the reservoir on Alpina series machines built between 1990 and 2010. That date range matters, since later machines are not covered by this listing.
Check the age of your Alpina and the size of the existing cap before ordering. If you are unsure, send us a photo and we will confirm it.
$6.00 AUD
A conical spring, 3 to 8mm with a height of 14mm, listed as a SICO spare for a micro switch. Small, easy to lose, and the reason a switch stops returning properly.
The listing names no machine model, so compare the dimensions against the spring you are replacing before ordering, and ask us if it is close but not exact.
$12.00 AUD
A 240V power cable listed as a SICO spare for the 400 to 650W models. A frayed or heat damaged lead is not something to nurse along, and replacing it is the straightforward fix.
It is listed for the 400 to 650W machines. Check the wattage on your machine plate before ordering, and ask us if the plate has worn off.
$4.00 AUD
L-shaped Teflon holder clips, 8 by 30mm, listed as a SICO spare. They hold the Teflon strip flat over the welding element so it does not lift and foul the seal.
No machine model is named on this listing. Measure the clips you are replacing and check them with our team at Laverton North or Epping before ordering.
$2.00 AUD
A black rubber O ring for a reservoir base, ID 5mm, OD 8mm, 2.5mm section, stocked as a SICO spare. O rings harden and flatten with age, and a perished one is a slow leak you will chase for weeks.
Measure the ring you are replacing against those dimensions, or bring it into Laverton North or Epping and we will size it against stock.
$0.40 AUD
A zinc plated screw, 3.5mm diameter by 16mm long, stocked as a SICO spare. Small fasteners go missing during a repair and it is worth grabbing a few while the machine is apart.
No model is listed against it, so check the thread and length against the screw you are replacing, or bring one in and we will match it.
$24.90 AUD
A weld Teflon strip for the SICO Alpina. This part is marked discontinued, so what we have is what is left and we cannot reorder it once the shelf is clear.
Listed for the Alpina. If you run a different SICO machine, do not assume it crosses over. Check with us at Laverton North or Epping and we will look for the current equivalent.
$95.00 AUD
SICO electronic card GE09 for Nevada models built from 2019 onwards. The Nevada changed boards during its run, so this is the later card and it is not the same part as the pre 2018 version despite sharing the code.
Read the code and the date off your existing board before ordering. We can check it for you if you send a photo through.
$95.00 AUD
SICO electronic card GE09 for Nevada models built before 2018. SICO changed the board part way through the Nevada run, so the pre 2018 and post 2019 cards are not the same item even though the model name is.
Check the date and the code on the card you are replacing, or send a photo to Laverton North or Epping and we will tell you which one you need.
$96.10 AUD
SICO electronic card GE-07 for the 250 GN Plus models. The card is the control board, and it is usually what you are chasing when a sealer powers up but will not run its cycle properly.
Cards are model specific and this one is for the 250 GN Plus. Check the code printed on your existing board before ordering and we will confirm the match.
$59.10 AUD
SICO electronic card GE-14 for the LED 250 GN Plus models, noted on the listing as ISA. The LED version of the 250 GN Plus takes its own board, so this is not the same card as the standard model.
Read the code off the board you are pulling out and check that it says GE-14, or ask us and we will confirm before you order.
SICO electronic card GE 09 for the SLine series, covering the S350, S550 and S700 models built before 2020. The cut off matters, since the boards changed after that and the later machines take a different card.
Confirm the code printed on your existing board before ordering. We are happy to check it for you if you send through a photo.
$85.00 AUD
The SICO GE-10 electronic card, the circuit board to suit the Conservotta Professional. The card runs the timing and control side of the machine, so an intermittent or dead sealer with a healthy pump often comes back to the board.
For the Conservotta Professional. Cards are model specific, so confirm yours carries the GE-10 marking, or send us a photo before ordering.
$99.00 AUD
The SICO GE-7 electronic card, the circuit board for the ISA Professional. This is the board that controls the vacuum and seal cycle, and it is not interchangeable with the other cards in the SICO range.
For the ISA Professional. Check the code printed on your existing board reads GE-7, or send through a photo and we will confirm it before you order.
$95.00 AUD
SICO electronic card GE16 for the Domestic Soft Vacuum series. It is the board that runs the vacuum and weld cycle on those machines, and replacing it is the standard fix when the control side has failed but the pump is sound.
Read the code off your old card first. If it does not say GE16, give us a call and we will find the right one.
The GE16 electronic card for the SICO Sline soft vacuum series. It is the board that runs the cycle, so if the machine has gone unresponsive or drops out mid cycle this is often where the fault sits. Confirm your machine is from the Sline soft series and that GE16 is the card fitted before ordering, since boards are not interchangeable.
$99.00 AUD
The SICO electronic card for the Micra Plus Professional, the machine's circuit board. Boards run the vacuum and seal timing, so a machine that behaves erratically rather than simply failing is often pointing here.
This one is for the Micra Plus Professional and does not cross over to other SICO models. Confirm your machine before ordering, and we can check the board markings with you.
$91.50 AUD
Code: 128735
SICO jar sealing attachment allows you to vacuum seal split-lid jars without boiling. Simply connect to your SICO vacuum machine and place tool over loosely screwed lid. Vacuum will form under the lid sealing it and preserving the contents.
Using our lid sealing attachment in addition quality jars will ensure proper seal of all your foods - great for preserving! Simply place the lid over your jar then attach the SICO jar sealing tool to the top and watch as all the hard work is done for you - it's as simple as that!
This enables your produce to be left on the pantry shelf for an extended time until you are ready to eat!
Made in Italy
$29.00 AUD
A long black rubber gasket from SICO, 8mm high, used as the bottom or top seal. When a chamber machine stops holding vacuum, a flattened or split gasket is the usual culprit and this is the part that fixes it.
The listing does not name a model, so measure the channel on your machine and check the length with us at Laverton North or Epping before ordering.
$6.00 AUD
The Marlin cap flat seal for the S-Line pump piston, 27mm outside diameter by 1mm, in beige. It is the flat seal that sits on the piston face, and it hardens and shrinks with heat and hours.
Listed for the SICO S-Line. Measure the seal you are taking out against 27mm before you order, and we will confirm it for you if you ask.
$10.00 AUD
The Marlin cap seal for the pump piston, 25mm outside diameter by 1mm, beige, for the SICO S250 gn. The seal rides in the bore and does the work of pulling the vacuum, so it is the first thing to look at when a pump has gone lazy.
Measure yours against 25mm before ordering, since the S-Line seal is a different size. Ask us if you need it confirmed.
$9.00 AUD
The SICO micanite board for the Nevada S300. This is the insulating layer under the sealing element, and a scorched or broken board is a common reason for a seal that looks fine at one end and fails at the other.
Cut for the Nevada S300. Model matters here, so confirm yours before ordering, or send us a photo and we will check.
Showing 30/113
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.