CO2 Tanks & Regulators

Code: 127760

A way to dispense your kegs on the go. No need for a heavy Co2 tank, this hand held unit pushes beer using small 16 cartridges. For use with ball lock type kegs, 2-5 16g cartridges will push 19L of beer.

Portable- Small, lightweight, no tanks or hoses
Fast- Charges kegs in seconds
Easy to Use- Trigger valve allows precise control of gas

Note: because of the small amount of Co2 in each cartridge, this product will NOT carbonate your beer.

Includes ONE 16g Co2 cartridge.

L__cm, W__cm, H__cm

A Mini-core 360 brass adaptor for 74g threaded CO2 cartridges, giving you portable gas for carbonating and dispensing on the go. Screw in a bulb and you have pressure anywhere, no big cylinder required. Perfect for picnics, camping and small keg setups.

An MFL adapter to barb, OD 5, a spare part for the mini regulator CO2 charger. It takes the MFL thread across to a barb so line can be pushed on and clamped.

A small fitting, and the one that decides whether the rest of the setup goes together. Check your line is OD 5 before ordering, and ask us if you are unsure of the thread.

Code: 129309

This bottle filling gun works with almost any bottle size and shape. Can be used for bottling beer or wine, or dispensing directly into a glass.

Includes beer line and two (2) stainless clamps.

L__cm x W__cm x H__cm

This bottle filling gun works with almost any bottle size and shape. Can be used for bottling beer or wine, or dispensing directly into a glass.

Includes beer line and two (2) stainless clamps.

A brass CO2 cylinder valve with a built in pressure relief valve, for safely controlling the gas from your cylinder. The relief valve vents if the pressure climbs too high, adding an extra measure of safety to your setup. A quality replacement part for the home brewer running CO2.

A black metal twist handle and knob to replace a worn or missing one on your CO2 cylinder valve. It gives you a firm, comfortable grip for opening and closing the gas. A small part that makes your cylinder easy and safe to use again.

Threaded 16 gram CO2 bulbs, four to a pack. The threaded type screws into a charger rather than being pierced, and that is the difference that catches people out when they order.

Handy for a portable setup where hauling a full cylinder around is not on. Check whether your charger takes threaded or non threaded bulbs before ordering, and ask us if you cannot tell.

16g Co2 Cartridges with a threaded top.

** Online Price Only **

-Threa 3/8-24UNF
-Safe working pressure 20.1Mpa
-Minimum Burst Pressure 54.0Mpa
-Do not store in temperatures above 40C

The grey plastic twist handle knob for the Keg King CO2 regulator. It is the bit that cracks or spins loose long before anything else on the regulator does, and a cheap fix when it goes rather than a new regulator. Supplied as the knob alone. Regulator handles are not universal, so check yours is a Keg King unit before ordering.

A type 30 nut adaptor for CO2 cylinders, a spare part for the mini regulator. Small fittings like this are the usual culprit when a mini regulator will not seal against a cylinder.

Listed as type 30, so check the thread on your cylinder before ordering. Bring the regulator and the bottle in to Laverton North or Epping and we'll test the fit.

A replacement brass spindle for the valve on your CO2 cylinder, to fix a valve that has become stiff or leaky. It swaps into the standard 2.6kg and 6.0kg cylinder valves, saving you replacing the whole thing. A small spare that keeps your gas flowing safely.

The Keg King mini gas charger, made to run 16 gram CO2 bulbs. It gives you a small, portable way to put gas on a keg without dragging a cylinder and regulator along with you.

Bulbs are sold separately. Check which bulbs your setup uses, threaded or otherwise, before ordering, and we can pair the two up for you at the counter.

A 10 pack of threaded 16 gram CO2 bulbs, for charging your mini keg regulator or carbonation setup on the go. Keeping a few on hand means you are never caught short mid pour. A handy, good value pack for the portable dispensing kit.

A Harris CO2 gas regulator with a double gauge, reading 0 to 400 kPa. Two gauges means you can see bottle contents and delivery pressure at the same time, so you are not caught out by an empty cylinder halfway through service.

Check the cylinder thread you are running before ordering, and ask at Laverton North or Epping if you are unsure what you have.

To protect what aids in carbonating & dispensing your kegs, or prevents you from getting a refill from a leak caused by a drop, bash or bludgeoning from a broken regulator gauge. We truly recommend buying one of our heavy duty 304 stainless steel reinforced MKIII Regulator Bump Guards. 
See our full description for more!

Stainless Steel MKIII Regulator Bump Guard/Gauge Guard - DISCONTINUED

Are you like us and bump or push in your Kegerator too hard against the wall with the gas bottle on the back? Maybe you've broken a dial in the process of transporting your gas bottle with the regulator attached.  Perhaps you're in a busy cafe/bar and someone needs to change over the tank and they drop the regulator, smashing the dial. That's money wasted and time spent without whats on tap.

You need our tough stainless steel regulator bump, bash, smush & drop (within reason) guard protector.

Designed and built by those who are tired of replacing guages and getting refills for a simple accident.

Unlike most Gauge Guards/Gauge Cages this particular design is made completely from 304 stainless steel so it wont rust over time.

Features:
- Protect your regulator guages from accidents.

- Extremely useful for portable systems.

- Fits the MKIII like a glove

- 304 stainless steel

- Easy to fit in less than 5 minutes

This disposable 1250g CO2 cylinder for Soda Stream is discontinued and is no longer being restocked. It stays listed here for reference while any remaining stock clears.

If you are after a CO2 option for a soda setup, have a word with us about what is currently available rather than counting on this one, since we cannot promise supply.

Uses 16g Co2 cartridges and screws into an MFL threaded disconnect to dispense beer.

** Online Price Only **

Uses 16g Co2 cartridges and screws into an MFL threaded disconnect to dispense beer.

Note: does NOT include Co2 cartridges or MFL disconnect.

A replacement pressure relief valve for your CO2 cylinder, the safety part that vents excess pressure to keep everything within safe limits. If yours is weeping or past its best, a fresh PRV brings peace of mind. A cheap part that is well worth keeping right.

This covers the five year pressure test on a CO2 gas cylinder. Bottles need periodic testing before a gas supplier will refill them, and this service takes care of it on your cylinder.

Drop yours in to Laverton North or Epping and we'll organise the test and hand it back stamped. Give us a bell first about current turnaround so you're not caught short on gas.

A disposable CO2 gas cylinder holding 1.43 litres. Once it's empty it goes in the bin rather than back for a refill, which suits people who dispense occasionally or want a spare in the cupboard without owning a swap bottle.

Check the thread and the regulator you're running before ordering so you know it will connect, or ask us and we'll check it for you.

A Keg King inline splitter switch that lets a regulator run two CO2 flow pressures. It sits in the gas line and splits the feed so you are not swapping fittings back and forth.

Sold as the one switch. Check the fittings on your existing gas line before ordering. Send us a photo of your regulator connections and we will tell you whether it suits.

The Equip-Pro CO2 pressure loss detector, an inline regulator for gassing one or more tanks. It sits in the gas line and flags a pressure loss, which is how you find out about a leaking seal before you find out about oxidised wine. Set up for single or multiple tank use. Tell us how many tanks you are running and what fittings are on them, and we will confirm what else you need.

A high pressure extension hose for connecting your CO2 cylinder to your regulator or gear when you need a little more reach. Rated for gas pressure and built to last, it gives you flexibility in how you set up your kegerator or fermenting rig. A simple way to make your bench work the way you want it to.