Bottles & Closures

A green cone with a 14mm bore for the TEM bench gravity filler nozzle, listed for olive oil. The bore size sets how fast the oil runs, so it needs to match what your nozzle is set up for. It suits the TEM bench gravity filler and nothing else named here. Check the bore on your existing cone before ordering, or ask us and we will confirm.

Quality filling accessories for Enolmatic equipment, specifically designed for filling large bottles. The set is suitable for bottles with openings of 28-65mm, including milk bottles and other large containers.

Product features:

• Suitable for bottle openings with diameter 28-65mm
• Specially designed for filling milk bottles and large containers
• Fully compatible with Enolmatic filling equipment
• Made from food industry compliant materials
• Easy to clean and maintain

The filling accessories set ensures accurate and fast filling of large bottles, being an ideal solution for both small producers and home use. Durable construction and quality materials ensure long service life of the accessories.

Enolmatic part number 10.11O: the complete oil nozzle, supplied with the yellow cone and the mounting bracket. This is the nozzle set for filling oil rather than wine, so it is what you swap across to when the Enolmatic moves from the winery to the olive press. Quote part 10.11O when ordering and we will make sure it is right for your machine.

Code: 129946

12mm stainless compression fitting to 1/2 inch BSP male.

A manual corker press from Ferrari for plastic champagne stoppers, sold as the Ti Tappo. It is built for pushing plastic sparkling stoppers into the bottle neck rather than for standard straight corks.

Stopper and bottle neck sizes vary, so bring a bottle and a stopper into Laverton North or Epping and we will check they suit the press before you buy.

A set of four spare brass jaws from Ferrari for the pedestal corker. The jaws compress the cork before it goes in, and worn jaws show up as corks that crease or refuse to seat.

Listed for the Ferrari pedestal corker. If yours is a different make or a bench model, check with us at Laverton North or Epping first, since jaw sets are not interchangeable.

The Emily Bottle Capper is a long lasting, smooth operating, reliable capper made from self-lubricating nylon and is surprisingly strong. The unique patented design has a gear driven head that makes capping a breeze since less overall force is required.

The built-in magnet allows the cap to be positioned in the capping head and then applied to the bottle rather applying the cap on top of the bottle first.

This listing has come through with several product names run together, covering a 29mm bell cap for a crown sealer, a 29/31 capper part, and a spirit wick burner for a five litre copper still. We cannot tell from the title alone which item the page actually sells.

Please ring us with the part you are after and we will confirm exactly what is in stock before you order.

A single spare spring from Ferrari for the pedestal corker, the one located with the jaws. Small part, but a tired spring means the jaws stop closing evenly and the corks suffer for it.

There is a second spring listed for the position under the bottle plate, so make sure you are ordering the one you actually need.

The actuation piston, listed as P1, for the electric Ercole capper. It is the part that drives the head through the capping stroke, so a capper that has gone soft or inconsistent often traces back to here.

Confirm your machine is the electric Ercole model before ordering. Send through a photo of the machine plate and we'll check the part number against it for you.

TENCO part number 4.18 for the Enolmatic bottle filler: the float base complete head, supplied with its bracket. This is the assembly that governs the float, so it is the first thing to look at when the filler stops cutting off cleanly. Quote part 4.18 when you order, and if yours is an older Enolmatic, check the part number with us first.

A mechanical float valve for a bottle filler header tank, listed for TEM, Mori and Marchisio fillers. The float holds the level in the header tank steady as bottles draw off it, and a steady level is what keeps fill heights consistent down a run.

Confirm which of those brands and which model you are running before ordering, and we'll check the part against it for you.

An Australian made plunging plate with a round base 250mm in diameter and a 19mm, 3/4 inch, BSPT socket welded on. The socket takes a threaded handle, which is not included.

Sold as the plate only. If you are matching it to a handle you already have, check the thread first, or send us the details and we will confirm the fit.

The Derrico crown sealer in the bench model, with a three handle rotating action and a white base. A bench capper takes the effort out of a long bottling day compared with a hand capper, and the rotating handle means you are not wrestling the bottle. Bells are sold separately by cap size, so check which one you need or ask us at Laverton North.

A reducing bush in BSP, going from 0.75 inch down to 0.5 inch, female to male. It is the piece that lets a smaller fitting sit into a larger port without any mucking about.

Sold on its own. Threads of this sort are worth confirming before you order, so tell us the two sizes you need to join and we will check this one suits.

The standard cup muselet part for fitting the wire hood over your sparkling wine corks. It holds the cage square on the bottle, so the cork is secured safely and evenly. A small but essential piece for home made prosecco, pet nat, or champagne style wines.

A full bush in stainless steel with a 3/4 inch taper thread. Taper threads seal on the thread itself rather than on a face, which is why they turn up on tank and barrel work.

Sold as a single bush. Taper and parallel look much alike once they are in your hand, so ask us if you need help telling which one your fitting takes.

White plastic stoppers for champagne bottles, 25 to a pack. They seat in the neck of a sparkling bottle and are held down by a wire hood in the usual way, and twenty five is enough for a decent home run.

Confirm your bottles take a champagne finish before ordering, and we can check a sample against one in store if you bring a bottle along.

A brass reducer taking male BSP 19mm, that is 3/4 inch, down to male BSP 12mm. Both ends are male thread, so it joins two female fittings of different sizes.

Small, inexpensive and the sort of thing worth having a couple of in the toolbox. If you are not certain which thread you are working with, bring the fitting in and we will size it up on the counter.

A hex nipple adaptor taking 12mm female BSP, that is 1/2 inch, out to 19mm male BSP, 3/4 inch. The hex body gives you something to get a spanner onto.

Sold individually. Thread sizes are easy to mix up once fittings are off the machine, so send us the sizes you are joining and we will confirm this is the right bush.

A 304 stainless concentric reducer cone taking a 2.0 inch triclover to 1.5 inch. A single step reduction, so you are not stacking adapters to get where you want to be. Clamps and gaskets are not included. Measure the triclover ferrules at both ends of your run before ordering, and drop us a line if the sizes do not add up.

The Zeus pedestal corker is built for the big jobs, handling bottles up to around 65 cm tall with ease. A sturdy floor standing frame and a smooth lever action drive the cork home straight and true, every time. If you bottle in volume, or love an oversized format, this is the corker that keeps up.