Bottles & Closures

A hot sealing wax applicator unit, offered as clearance stock. Clearance means it is going at a reduced price to move it on, so have a look at the condition and ask us anything you want clarified before you buy. For anyone waxing bottle tops in volume rather than dipping by hand. Ring the shop and we will tell you exactly what is in front of us.

A cork stopper with a black domed grooved cap, listed by Ferrari with a 32 by 16 cap, expanco cork and a 20.5mm diameter. The title runs together and cuts off at the end, so the total height is not stated clearly on this page.

Measure your bottle neck and ask us to confirm the full dimensions before you order in quantity.

A red rubber filling cone sized for necks between 15 and 22mm. It seats in the bottle mouth and keeps the fill tidy rather than running down the outside of the bottle, and rubber holds its shape through a long bottling session.

Measure the internal neck diameter of the bottles you are filling and check it falls inside the 15 to 22mm range before ordering.

A stainless steel K-Lok (Kinglock) male to tap shank adapter, for connecting your font or tap shank to the Kinglock system quickly. The dry break fitting keeps things clean when you swap lines. A neat, reliable link for your draught setup.

The MFL tap shank adaptor is what you need to connect your draft tap directly to your MFL disconnect (will work with both ball lock and pin lock disconnects). These allow you to make a very compact portable set up.

The MFL Tap Shank Adaptor is what you need to connect your draft tap directly to your MFL disconnect (will work with both ball lock and pin lock disconnects with MFL threads).
These allow you to make a very compact portable setup.

We recommend using one of the FC Nukatap with this adaptor as this provides some restriction of the flow but they will also work with other Intertaps, Nukatap and brands of taps. A nylon washer is also recommended between the disconnect and the shank adaptor.

These tap shank adaptors are compatible with the Nukatap FC, Nukatap SS Taps. Please bear in mind that due to the compact size we do not have enough space to accommodate for the auto spring return so this is not compatible with this setup.

Note: does not include tap or disconnect

A spare 29mm crown bell for the Eco Grifo TC1T rotary bench capper. The bell is the business end that crimps the cap onto the bottle, and a worn or chewed bell will start bending caps rather than seating them.

This one is 29mm for the TC1T. Measure your caps and check the model before ordering, and ask us if you would like it confirmed.

Simplify your kitchen cleanup with the Wok Brush Short Handle. This tool efficiently removes burnt-on food from your wok after high-heat cooking. Designed for busy kitchens, it helps maintain your cookware in top condition.

An 80cm silicone transfer pipe for the Fermzilla, fitted with a stainless steel ball float. The float keeps the pickup just below the surface as the level drops, so you draw from the clearest beer rather than stirring up what has settled.

Confirm your fermenter is a Fermzilla before ordering. There is plenty on the shelf at the moment if you want a spare.

A 29mm bell cap, listed as part 29/31 FG F H, for the Ercole pneumatic air crown sealer capper. The bell is the part that comes down onto the crown seal and forms it, so a worn one shows up as inconsistent crimps.

The title on this listing runs a few part codes together, so quote us your capper model and we'll confirm this is the right bell before you order.

The Hop Bong is a versatile pressurizable tri-clover accessory, capable of not only dry hopping oxygen purged hops into fermenters. But also as an inline carbonation/oxygenation accessory.

This is a completely new pressure pack for the basic FermZilla Tri-Conical and All Rounder Fermenters with the new 2" Tri-Clover Adapted Pressure Lid.

Constructed from Nylon 12: An autoclavable, extremely robust, and chemical resistant engineering plastic.

Includes:
1 x FermZilla Tri-Clover Pressure Lid (including PRV, Bottle caps, 2Inch clamp, seal, PCO1881/Tri clover adaptor)
1 x Yellow Carbonation Cap PCO1881 (Yellow / Liquid)
2 x  Carbonation Cap PCO1881 (Red / Gas)
1 x SS Float + 100cm Silicone Dip Tube + Dip Tube Hop Filter
1 x FermZilla Tri-Conical - 2" x 2" Tri-Clover Butterfly Valve
1 x 2 Inch Tri-Clover - Hop Bong - Sight Glass
1 x PCO1881 PRV Cap
1 x Red PRV (35psi/2.5bar)
2 x 2 Inch Tri Clover Clamp
2 x 2 Inch Tri Clover Silicone Beaded Seal

Capacity in Hop Pellets
150g to 180g

A manual screw cap crimper from Ferrari for 31.50mm bottle necks, used to form a tamper proof seal. This is the heavy duty model, built for repeated use rather than the occasional batch.

The 31.50mm figure is the neck size it is set up for. Measure your bottles before ordering, since caps and necks outside that size will not crimp properly.

A spare bell for the Derrico rotary handle capper, sized for 26mm diameter caps. The bell is the wearing part on any capper, and a worn one shows up as crowns that crimp unevenly or slip off the bottle. Supplied on its own. Listed for the Derrico rotary handle model and 26mm caps, so check both against your capper before ordering.

A 38mm female BSM nut in AISI 316 stainless steel, complete with stop and O ring. It pairs with a male 38mm BSM fitting to make the joint.

Sold individually with the seal fitted. BSM sizing does not line up with BSP, so if you are not sure which standard your gear runs on, send us a photo and we will identify it.

304 Stainless Steel Liquid (Black) Ball Lock Disconnect With MFL Fitting are of the highest quality and durability for both commercial and home use.

Suited for 19L Ball Lock kegs, or converted 50L Keg Couplers.

The metal muselet tying arm for the Super Grifo capper, for sparkling wine. The muselet is the wire cage over a sparkling cork, and this arm is what twists and tightens it down. Metal construction, so it holds up to the force involved.

For the Super Grifo capper. Check the fitting on your machine before ordering, and we are happy to confirm it for you.

This handheld corker is of excellent design and easy to use. It utilises a 4 piece compression on the cork. 

This corker utilises a 4 piece iris that compresses the cork equally from 4 directions.

This corker works on the same principle as our larger bench & floor model corkers.

Requires little effort to use & has adjustable depth setting.