All Grain Brewing Systems

A 65L DIGIBoiler package from Kegland running on 240V, supplied with a stainless steel lid and a copper pot condensor. The condensor takes care of the steam while you hold your boil, which matters when you brew under a roof. A solid step up in capacity for bigger batches. Give us a ring if you want to check what else you need to complete the setup.

A polypropylene mounting board, 45 x 34 x 1.5 cm, giving your grain mill a flat and stable base to bolt onto instead of clamping it to the edge of the bench. PP wipes clean of husk dust and grain oils, so it stores away tidily between brew days.

Check your mill's footprint and bolt spacing against the board dimensions, or ask us and we'll help you work it out.

Bamboo base board for 2 roller grain mill.

Total dimensions:
450mm x 340mm x 15mm

Hole dimension:
115mm x 70mm

Screw holes 140mm apart.

Requires 2x M6 bolts to mount the mill (not included)

** Online Price Only **

This 240v motor has been coupled with a high torque gearbox to bring the RPM down to the perfect milling speed of 180rpm. 

Includes spider coupling with polyurethane cushion to suit 10mm and 12mm shafts as well as a safety kill switch.

Note: Grain mill and hopper NOT included.

An 80cm silicone transfer pipe for the Fermzilla, fitted with a stainless steel ball float. The float keeps the pickup just below the surface as the level drops, so you draw from the clearest beer rather than stirring up what has settled.

Confirm your fermenter is a Fermzilla before ordering. There is plenty on the shelf at the moment if you want a spare.

A set of two replacement plastic knobs to suit the 65L DigiBoil glass lid. If yours have cracked or gone missing, these get you handling a hot lid safely again. A small spare that saves the hassle of managing without.

A stainless steel ice bank water temperature chiller fitted with four 20 metre coils and a pump. Water is chilled in the bank and circulated through the coils, giving you consistent cold across multiple lines rather than relying on a single small chiller.

This is commercial scale gear. Give the team a call to talk through power, plumbing and how it suits your bar layout before committing.

An insulation retroshield made to suit the 30 litre plastic fermenter. It wraps the fermenter to slow down temperature swings, which is the difference between a steady ferment and one that rides the weather.

Handy in a Melbourne garage, where the overnight drop is usually the real problem. For the 30 litre plastic fermenter. Check your fermenter size before ordering, and ask us if you are unsure.

The G30ᵌ is an all-in-one Brewing System with a 30 L (8 US Gal) capacity, designed to make up to 40 pints of high-quality beer from one brew. With Grainfather App integration, great features, and an intuitive design, it’s perfect for both beginner and experienced all grain brewers to master their all grain brewing journey.

Features:

• Sleek 304 grade stainless steel body
• Connect your mobile device to the Bluetooth controller via the Grainfather App and manage your brew remotely
• Use with the GCAST Bluetooth Wi-Fi Bridge to bridge the connection between your G30 Controller and Grainfather App through Wi-Fi to give you more flexibility to move around during your brew day
• A robust magnetic drive pump for maximum brewing efficiencies
• Perforated grain basket negates the need for a top plate and no additional pipework needed
• Efficient and sanitary brew transfer with the Counterflow Chiller
• Compatible with the Still Spirits T500 Alembic Dome & Condenser
• Backed by a 3-year warranty

Compatible with:

• GF30 Conical Fermenter
• G SERIES Glycol Chillers
• GCAST Wireless Bridging Device
• SF50 Conical Fermenter
• GCA Glycol Chiller Adapter
• Alembic Dome

What's Included

• Grainfather G30v3
• Bluetooth controller
• NEW perforated grain basket
• Grain plate
• Lifting bar
• Glass lid
• Recirculation pipe
• Filter
• Hose fittings
• Built-in pump
• Counterflow Chiller
  • Water inlet and outlet hosing 
  • Wort inlet and outlet hosing
  • G30 connector  
  • 9mm right angle hose barb connector for G40, G70 and other brew systems 
  • Tap adapter set for connection to garden hoses and most faucets

Specifications

SIZE:

685 x 386mm (27 x 15’’)
WEIGHT:

14.6kg (32lb)
MAX PREBOIL VOLUME:

30L (8 US Gal)
BATCH VOLUME:

Max: 25L (7 US Gal)
Min: 10L (3 US Gal)
GRAIN BILL:

Max: 8kg (18lb)*
Min: 1.5kg (3.3lb)
*9kg (20lb) with top plate

POWER:

NZ, AU, EU, UK, US: 2000W, 220V
Also in the US: 1600W, 110V
CONNECTIVITY:

Bluetooth Control

The Grainfather 40 litre sparge water boiler, running on 240v at 10A so it plugs into an ordinary household outlet. It heats and holds your sparge water so it is ready the moment the mash is, which takes one job off an already busy brew day. Check you have a spare 10A outlet within reach of your bench, or come and see one at Epping.

Code: 130156

Replacement malt pipe for 35L Robobrew.

The insulation jacket for the Guten 70L. It wraps the vessel to hold heat in, which means less power spent holding a mash or a boil and a steadier temperature while you get on with the day.

This is a replacement or add on part rather than a complete unit. Made for the 70L Guten, so check your model size before ordering.

The control box for a Grainfather Connect. It is the brains of the unit, so this is the part you want if yours has failed or been knocked about rather than replacing the whole system.

Confirm your unit is a Grainfather Connect and check the part against yours before ordering. Send us a photo of the serial plate if you would like a hand identifying it.

This Grain Muncher with 3 Roller Mill and a larger in roller size and hopper capacity is perfect for any homebrewer.

 The Malt Muncher 3 Roller Grain Mill is specifically designed to give that extra crush when passing through. If you're after bigger grain hopper capacity and the ability to double crush to your exact specifications then this is perfect for you.

This mill is suitable for those brewers exceeding 7kg batches at a time and wants to spend less time feeding the mill and more time digging into brew-day snacks.

This Grain Muncher with 3 Roller Mill and a larger in roller size and hopper.

Includes:

- Grain hopper

- Manual Crank handle

- 12mm crankshaft

- Roller adjustment knobs

- Reinforced chassis with pre-aligned mounting holes for perfect stability if mounting to a board.

- 12 TPI knurl to efficiently pull grain through rollers while leaving the hull intact to form an excellent filter bed for sparging

Code: 130153

Lid suitable for 58L keggle.

The Cooling Pump Kit allows users of the Grainfather Conical Fermenter to control the fermentation temperature with cold water by pumping it through the double walled insulated interior. 

*Use this if you do not have a Glycol Chiller and still wish to control the temperature.

Temperature control is one of the most crucial elements for producing a good quality beer. It needs to be regulated and stable throughout the whole fermentation process to ensure the yeast doesn't get stressed and ferments correctly to get the right flavour profile.

To be able to cool with the Grainfather Conical Fermenter, you need to have the Conical Fermenter Temperature Controller. Then once your target temperature is below the temperature of the wort in your fermenter the Cooling Pump Kit pumps ice cold water through the double walled insulated interior to cool down your wort. 

Simply connect the couplers and insulated hoses to the Conical Fermenter, submerge the submersible pump into a cooler box with water (add ice for your required temperature) and pump the liquid through the insulated cooling sleeve of the Conical Fermenter body.

What's Included

• Conical Fermenter Cooling Pump (submersible)
• T-section power connector
• 2 x brass couplers

A dual valve to suit the Grainfather conical fermenter, giving you clean control over racking and dumping trub. The twin valve setup lets you draw off yeast and sediment separately for clearer beer and easier harvesting. A worthwhile upgrade for the brewer chasing a tidy, professional process.

A cooling connection kit for the Grainfather conical fermenter, giving you temperature control over your ferment. Hook it up to run cooling through the jacket and you can hold your beer at the perfect temperature for clean, consistent results. A worthwhile add on for the brewer who cares about the details.