Bottles & Closures

A spring loaded foot valve for a bottle filler. The valve stays shut until the wand touches the bottom of the bottle, then opens and fills from below, which keeps splashing and oxygen pickup down. Spring loaded, so it closes the moment you lift out.

Check it against the filler wand you are using, or bring the wand into Laverton North or Epping and we will match it.

The Corker accessory is designed for the spare Capper bell part on diameter 26mm Caps - Grifo. It is compatible with both TC1T and TC2t cappers, as well as TG and TGC corkers.

The filling trigger for a Demaria fill gun. This is the trigger itself, and we also list a separate smaller trigger part, so it is worth checking which of the two you need before ordering.

A worn trigger makes bottling slower and messier than it has to be. Bring the gun in to Laverton North or Epping and we'll match the part off it.

A Colibri champagne bottle stopper, made in Italy, for keeping the fizz in your sparkling wine after opening. The snug seal holds the pressure so your bubbly stays lively for the next glass. A smart little gadget for anyone who loves a glass of sparkling.

This Enolmatic Hose is designed specifically for use with Demijohn kits, ensuring a secure and efficient transfer of liquids during your wine or beer making process. Made to fit perfectly, it helps prevent spills and contamination, making your bottling experience smoother and cleaner.

Hose ONLY

 These eco-friendly mailer boxes are 100% recyclable, reflecting our commitment to reducing environmental impact without compromising on quality.

Wine Carton Boxes Brown 3C - Size L308 x W237 x H312 mm for 12 bottles stored Upright (corregatted Brown)

A stainless steel male camlock with a 1/2 inch, 12.5mm, BSP female thread on the back. Camlocks make and break a hose connection without tools, which is why they end up everywhere once you have a few.

Sold as the male half only. Check the thread and the camlock size on the mating half first, or bring it in to Laverton North or Epping and we will do it.

Ideal for corking bottles with a minimum height of 23 cm, maximum 39 cm and maximum diameter of 14 cm with cork and synthetic flush caps ø min. 28 mm, max. 30 mm and maximum height 40 mm.

Automatic bottle height adjustment, manual cork insertion level adjustment and centering cone for optimal cork alignment with the bottle.

This ball valve is sold as a complete assembly so all you have to do is drill your 20mm hole in your keg, pot or vessel wall and you can fit this ball valve. 

This is a full port ball valve with a 14mm bore which allows maximum flow rate through the ball valve. The valve comes with Teflon tape already on the nipple, a silicon o-ring which is seated in the ½” BSP nut. 

The seat in the nut prevents the o-ring from rolling out of place when tightening. The 1/2” BSP Male x 13mm Barb (part no. 5700 shown in the picture to the left) can be fitted to the ball valve so you can attach any 11-14mm ID type hose (such as our silicon hose part no. 5496) On the inside of the vessel the ½” BSP nipple usually protrudes approximately 16mm meaning you can attach an elbow to the inside of the vessel so it draws from the bottom (shown in the picture to the left) 

Note: does not include the elbow or 13mm barb

Double-lever bottle capper with a 26mm magnetic bell housing for standard bottle caps. High-quality and very easy to use.

This nylon lever capper features an advanced, patented design with a gear‑driven capping head, reducing the amount of force needed to crimp steel bottle caps.

It also includes extra‑wide handles for improved comfort and stability, and a return spring around the capping head that automatically releases the capper once the seal is complete.

A chrome metal pourer with a synthetic stopper cork. It pushes into the neck of the bottle and gives you a controlled pour without dribbles down the label. The synthetic cork seals repeatedly without crumbling the way natural cork eventually does. Good for oil, vinegar or spirits on the back bar, and a small thing that makes a bottle much nicer to use.

This super handy device perfectly twist the wire on a cork cage leaving a professional finish. Simply pop the cage over the cork, place the loop of the cage through the hook and pull the fastener backwards. Takes seconds, looks brilliant. Use in conjunction with any of our Corks and Cages.

A red sleeve filling cone for larger bottles, covering 17 to 29mm, made to suit the Demaria red fill gun. The wider range takes in demijohns and big format bottles that the standard cone will not seal against.

It suits the Demaria red gun specifically. Check your neck diameters against the 17 to 29mm range, and ask us if you are working with something unusual.

Keep your bottle washer in top shape with our Spare Brush. Made of stainless steel and compatible with Ferrari bottle washers, it easily screws onto the frame. Keep your bottles sparkling with this galvanized brush.

A stainless steel thermowell, 8mm outer diameter by 600mm long with a quarter inch BSP male connector, by KegLand. It lets you take an accurate temperature reading inside your fermenter or kettle without exposing the probe to the liquid. A tidy fitting for the home brewer who likes precise control.

Product Overview
This ECO Pedestal Corker is equipped with durable jaws made from acetal resin and an adjustable cap insertion level for precise and efficient capping. It is ideal for capping bottles with standard caps, ensuring perfect alignment and depth control. Suitable for both home winemaking and small-scale commercial use, this corker handles a range of bottle sizes, offering flexibility and reliability.

Technical Specifications:

• Material: Jaws made of durable acetal resin
• Operation: Manual lever action with adjustable cap insertion level
• Cap Size Compatibility:
  • Max Cap Size: ø 30 mm x h 40 mm
  • Bottle Height Range: Min 25 cm, Max 33 cm
• Included Components: Corker unit with adjustable jaws and cap insertion level

Features:

• Acetal Resin Jaws: Provides secure and even compression, ensuring a perfect cap fit
• Adjustable Cap Insertion Level: Customise cap depth to suit different bottle sizes
• Easy to Use: Simple manual operation suitable for both beginners and experienced users
• Compact Design: Easy to store when not in use
• Versatile Capping: Designed for a variety of bottle sizes and standard cap types

Safety and Material Quality:

• Durable Acetal Resin Jaws: Designed for repeated use without wearing out
• Precision Engineering: Ensures accurate and reliable capping for consistent results
• Stable Operation: Securely holds bottles in place during the capping process

Cleaning and Maintenance:

• Easy to Clean: Wipe down with a damp cloth after use
• Low Maintenance: Durable materials ensure long-lasting performance with minimal care

Key Benefits:

• Efficient Capping: Designed for quick and easy capping of standard bottles
• Adjustable Cap Depth: Allows for custom cork or cap placement based on bottle size
• Durable and Compact: Acetal resin jaws provide durability, and the compact design is ideal for small spaces
• Easy to Store: Folds down for convenient storage

The spare bell for the Super Automatic capper, sized for 26mm beer bottle crowns. Bells wear and go out of shape over time, and a tired one is usually what is behind crowns that will not seat properly. Supplied as the bell alone. Listed for the Super Automatic capper and 26mm crowns, so check both against your setup before ordering.

Suitable to fill bottles of wine, beer, cider, milk and food liquid of similar density.  The ø 14 mm adjustable spouts allow handling the level in the bottle by simply screwing and unscrewing the adjuster ring. The height-adjustable bottle rest tray allows filling of formats from 375ml up to 2 lt. 

By TEM Italy

Gravity bottle filler, by TEM-4 head bench frame, Stainless steel, 14mm nozzles with the float.

Suitable to fill bottles of wine, beer, cider, milk and food liquid of similar density.

Dimensions: 60cm x 65cm x 160cm.

*Please note when postage please allow for a pallet*

A tapered agglomerated cork, roughly 36 mm at the base, 41 mm tall and 43 mm across the top, for sealing bottles and small demijohns. Agglomerated corks give you a consistent, good value seal that does the job batch after batch. Handy to keep a few spare in the drawer.

Designed to safely extract cork stoppers without crumbling, this traditional two-prong puller excels with aged wine bottles where cork integrity is compromised. The dual-prong design grips the cork securely from the sides, minimising pressure and reducing the risk of fragmentation. Ideal for collectors and enthusiasts working with vintage bottles where preservation of the cork—and the wine—matters.