Bottles & Closures

This Enolmatic electrical cable is designed specifically for the Australian market, supporting a 240V power supply. It ensures reliable and safe electrical connections for your Enolmatic equipment, meeting local voltage standards for optimal performance. Ideal for maintaining or replacing your existing cable with a product tailored to Australian electrical requirements.

A crown seal attachment that turns your Ferrari pedestal corker into a beer bottle capper, sized for standard 26 mm crown caps. Swap it on and you can seal your brews with the same sturdy lever you already trust. One tool, two jobs, and less clutter on the bench.

The cable switch for the electric model Ercole capper, carrying part codes se6.02025, se6.020.23 and e6.020.24. The switch is what tells the machine to run, and a capper that sits dead with power at the plug is often no more than this.

Match one of those part codes against your own machine before ordering, or send us a photo and we'll confirm it.

A stainless steel hosetail with a 50mm barb welded to a male 63mm, 2.5 inch, BSM thread. Welded as one piece for a 50mm hose onto a 2.5 inch BSM connection.

Sold individually. BSM threads are not the same as BSP, so if you are unsure which your gear uses, send us a photo and we will tell you what you are looking at.

A Ferrari hand held corker, the two piece type. This one comes without its box, so it is a tidy unit at a lower price rather than something you would give as a gift.

Hand corkers suit small batches and standard straight corks. Check the cork size you are using against the bore before ordering, or ask us and we will confirm.

Natural taper corks, approximately 21 to 25 mm in diameter and 33mm high, sold in a pack of six. Tapered corks go in by hand and come out the same way, which makes them the easy choice for bottles you open and reseal.

Necks vary, so measure yours against the 21 to 25mm taper, or bring a bottle into Laverton North or Epping and we will try one.

Precision hosetail connector designed for brewing systems and fluid transfer applications. Features a 19mm barb inlet for secure hose attachment and a male BSM 25mm thread (1 inch) outlet for reliable fitting connections. Ideal for kettle, fermenter, and pump integration in craft brewing setups. Durable construction ensures leak-free performance under typical brewing pressures.

Upgrade your FermZilla All Rounder or Tri-Conical with the new 2 Inch Tri-Clover Lid. Add yeast, hops or even take samples from a wine thief from the top and not have to remove the entire lid.

This particular lid was designed in order to suit a growing number of customers dry hop without exposing the batch to oxygen from opening the lid. By using this lid in conjunction with the FermZilla 2" Butterfly Valve and Hop Bong Kit, you would be able to purge CO2 into the tube and expel as all the oxygen around it and dump freely into the vessel.

Important:
- Release the pressure completely before opening the 2" Tri-Clover.
- Only use KegLand Red 35psi / 2.5 bar PRV or KegLand Yellow 17psi / 1.5bar PRV's with this lid. Ensure they are cleaned and dried of sticky residue before each fermentation. Failure to do so could cause injury and void warranty.

A stainless steel hex nipple adaptor from TEM Mori, male 19mm BSP on one end to male 25mm BSP on the other. It steps up between the two thread sizes, with a hex body for tightening.

Sold as one adaptor. Send us the threads you are joining and we will confirm the direction of the step before you order.

A stainless steel hosetail with the barb welded to a male 63mm, 2.5 inch, BSM thread. One welded piece, made up rather than bought off a rack, so there is no joint to work loose.

The barb size is not stated in the listing, so check it against your hose before ordering. Ask us and we will measure the one in stock for you.

Code: 127649

These larger 29mm crown cap seals are designed for champagne style bottles. Box of 6000.

This pack of 100 white plastic cork stoppers is designed specifically for champagne bottles. Featuring a finned shank, these stoppers provide a secure fit to help preserve the bubbles and freshness of your champagne after opening. Ideal for both home use and events, they offer a practical solution to keep your sparkling wine sealed and enjoyable.

A stainless steel hosetail with a 50mm barb, 100mm long, welded to a male 50mm, 2 inch, BSM thread. Our supplier lists it as the Delta destemmer adaptor.

Made as one welded piece rather than assembled from parts. Confirm the thread on your machine before ordering, and if you send us the model and serial number we will check it against this fitting.

A filling trigger part for the Demaria fill gun. Triggers cop the wear on a long bottling day, and this is the replacement component rather than the complete trigger.

Keep one on hand if you bottle in volume. We list two trigger items for the Demaria, so confirm your gun and check which one you actually need. Ask us and we'll sort out which is which.

A stainless steel lock nut in AISI 316, female 1.0 inch BSP, 25mm. It locks a threaded fitting in position once you have it where you want it.

Sold as a single nut. A simple part, but the thread standard matters, so tell us what you are locking off and we will confirm the size before it ships.

Code: 129331

Stainless steel elbow bend 1/2 inch BSP Male to 1/2 inch BSP Female.

A long 90 cm cleaning brush with an 8 cm expanding bristle head, made for reaching right to the bottom of a 54 litre demijohn. The flexible shaft bends around the shoulder of the vessel, so nothing gets left behind. Clean gear makes better wine, and this takes the struggle out of it.