New Customers get 5% OFF
Fast Shipping
Expert Advise
New Customers get 5% OFF
Fast Shipping
Expert Advise
New Customers get 5% OFF
Fast Shipping
Expert Advise
New Customers get 5% OFF
Fast Shipping
Expert Advise
New Customers get 5% OFF
Fast Shipping
Expert Advise
New Customers get 5% OFF
Fast Shipping
Expert Advise
- All categories
Your cart
Built to handle large catalog
Maximize' exclusive deal: After purchasing, you’ll receive: Free theme design & setup and 2 months free access to 200+ advanced sections & templates.
Explore full power of Maximize Theme
Choose your Location
-
Epping
Free
Usually ready for pickup in 24 hours
218 Cooper St, Epping VIC 3076
📞 (03) 9422 1711
🕐 Mon – Fri: 9 am – 5 pm
Sat: 9 am – 1:30 pm
Sun: Closed -
Laverton North Branch
Free
Usually ready in 24 business hours
Unit 2/176-178 Cherry Ln, Laverton North VIC 3026
📞 (03) 9422 1711
🕐 Mon – Fri: 9 am – 3 pmSat: 9 am – 1:30 pm
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
Vacuum Sealer Accessories
A vacuum sealer is a machine you keep, not a machine you replace. The reason we carry parts right down to the fuse is that these units are worth repairing, and a sealer that has done ten summers of passata and prosciutto usually just needs one consumable swapped.
Sealing bars are the part that wears. We stock the SICO Premium complete sealing bar in 250mm and 700mm, the bar magnet cover plate for the Series 250 Premium, the gasket seal for the SICO polycarbonate jar lid, and the 2.6 ohm fuse for the SICO electrical board. Teflon H45 is sold by the metre and it is the strip that stops the bag welding itself to the bar, so it is the first thing to check when your seals start going patchy. For EquipPro machines there is the electronic card for the T-Matic and rubber feet for the Pro50 and Pro80. The machines are here too: the EquipPro T-Matic, TPRO50, TPRO80 and TPRO80GAS, the FLB Orion with its auto features, and the Incasa 110W with pulse suction for lighter home use.
The tip most people need is to let the bar cool between long runs. Sealing bag after bag with no pause is what cooks the Teflon and shortens the life of the element underneath it.
Bring the machine in to Laverton North or Epping and we will match the part. Also see Vacuum Sealers, Vacuum Bags, Preserving and Smoking & Curing.
A vacuum sealer is a machine you keep, not a machine you replace. The reason we carry parts right down to the fuse is that these units are worth repairing, and a sealer that has done ten summers of passata and prosciutto usually just needs one consumable swapped.
Sealing bars are the part that wears. We stock the SICO Premium complete sealing bar in 250mm and 700mm, the bar magnet cover plate for the Series 250 Premium, the gasket seal for the SICO polycarbonate jar lid, and the 2.6 ohm fuse for the SICO electrical board. Teflon H45 is sold by the metre and it is the strip that stops the bag welding itself to the bar, so it is the first thing to check when your seals start going patchy. For EquipPro machines there is the electronic card for the T-Matic and rubber feet for the Pro50 and Pro80. The machines are here too: the EquipPro T-Matic, TPRO50, TPRO80 and TPRO80GAS, the FLB Orion with its auto features, and the Incasa 110W with pulse suction for lighter home use.
The tip most people need is to let the bar cool between long runs. Sealing bag after bag with no pause is what cooks the Teflon and shortens the life of the element underneath it.
Bring the machine in to Laverton North or Epping and we will match the part. Also see Vacuum Sealers, Vacuum Bags, Preserving and Smoking & Curing.
134 products
134 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$26.10 AUD
Code: 127454
Replacement teflon weld strip for SICO Nevada vacuum machine.
Specifications:
Suits SICO Nevada machine
Size: 39 x 2.9 cm
$30.50 AUD
The SICO Nevada reservoir part, supplied with the filter. The reservoir catches liquid before it can reach the pump, and the filter is the last line of defence. Worth replacing as a unit if the housing has hazed over or cracked.
For the SICO Nevada. Check your model before ordering, and send us a photo of the part you are replacing if you would like us to confirm.
$17.40 AUD
The SICO thermic overload protection fuse, listed to suit all SICO machines. It trips when the machine runs hotter or harder than it should, which is a feature rather than a fault.
If yours keeps cutting out, a new fuse is a start but the cause is worth chasing too. Confirm against your machine before ordering, and we are happy to help you check.
$17.90 AUD
The SICO premium air valve for wet products, listed for the Nevada. Wet products pull liquid towards the pump, and the valve is part of what manages that. Replacing a tired valve is usually cheaper than the alternative.
This one is for the SICO Nevada. Confirm your model before ordering, and our team at Laverton North or Epping can check it against your machine.
$13.40 AUD
A SICO spare listed as a single pole changeover switch, 1-0-II positions, rated 16A with four terminals and an 11 by 30mm body. It sits alongside several near identical switches in the SICO range.
The differences are millimetres and terminal counts, so compare it carefully against the switch you are removing and check with us before you order.
$13.40 AUD
A SICO spare, a black changeover switch with 1-0-II positions, rated 16A with four terminals and a 13 by 19mm body. It is listed in SICO's own parts shorthand.
There are several switches this size in the range and they are not the same part. Check the body dimensions and terminals on yours, and we will confirm the match at Laverton North or Epping.
$13.40 AUD
A SICO spare listed as a single pole black selector, I-II positions, rated 10A at 250V, with a 13 by 19mm body. That is everything the supplier record carries for it.
Given how close the switches in this range look, take the old one out and compare before ordering, or send us a photo and we will check it.
$13.40 AUD
A SICO spare part listed under the code Elpulunid, 20mm diameter with 4.8 tabs. It is a small electrical component from the SICO vacuum parts range, and the code is what came through from the supplier.
Check the diameter and tab size against your machine before ordering. We can cross reference the code with SICO if you are not certain.
$13.40 AUD
A SICO spare, a two pole illuminated red switch in the 0-1 pattern, rated 16A, with a 22 by 30mm body from the BI series. The shorthand is the supplier's, printed here as it reached us.
Panel cutouts differ between machines, so measure the aperture and check the rating before ordering, or ask us to confirm it against your model.
$3.00 AUD
A SICO spare part listed as a two pole illuminated red switch, 20mm diameter, 10A, with 4.8 tabs. The description is the supplier's own shorthand and it has not been expanded beyond that.
Electrical spares are easy to get wrong, so check the size and tab type on the switch you are replacing, or bring it into Laverton North or Epping and we will match it on the counter.
$13.40 AUD
A SICO spare part, the manopola or knob for the weld cycle timer. It is the dial you turn to set seal time, and it is a common casualty on a machine that has been used hard for years.
The listing does not name a model, so check the knob shaft and spline on yours or send us a photo and we will match it.
$1.80 AUD
A SICO spare listed under the supplier code Plmanopolanev. It is a small parts item from the SICO vacuum range, but the code is all that came across with it and we have not verified what it fits.
Give us the model of your sealer and we will check the code against the SICO parts list before you order anything.
$13.40 AUD
A SICO spare, listed as a two pole push button, 20mm diameter, rated 10A. The rest of the title is the Italian supplier's shorthand and we have not expanded it any further than what is printed here.
Compare it against the button you are pulling out before ordering, and ring us if the terminals do not look the same.
$13.40 AUD
SICO part no.8, the round main power switch, 10A, 20mm diameter with 4.8mm terminals. Listed by SICO as an ALL part, so it is used across their machines rather than tied to one model.
Switches are a common failure point on a sealer that has stopped responding. Confirm the diameter and terminal size against yours, or send us your model and we will check.
$4.50 AUD
A SICO knob, listed under the supplier code Plmanopola, for the S Line. Knobs crack and split long before the switch behind them gives up, and this is the tidy fix for a control panel that has seen a few years.
Listed for the S Line. If your machine is from another SICO series, check with us rather than assuming it crosses over.
$2.70 AUD
SICO rubber feet, listed as an ALL part, stabilise the unit across the range. The feet stop a sealer from skating along the bench while the pump runs, and take some of the buzz out of it.
They flatten and perish over the years, which is usually when you notice the machine has started walking.
Approximate dimensions
- Bottom Diameter: 9 mm
- Top Diameter: 13 mm
$27.50 AUD
Code: 128463
SICO Spare part: Bag stop bracket for Micra Professional , Con , Isa 2010
$49.00 AUD
SICO part number 8, the pressing arm plastic shell for the Conservotta. It is the outer shell you press down on to close the chamber, and a replacement brings a tired machine back to feeling solid.
Fits the Conservotta. Pressing arm shells are not interchangeable across the SICO range, so confirm your model with us before ordering.
$49.00 AUD
SICO part number 8, the plastic pressing arm shell for the ISA Professional. Sold as the shell on its own, so it is the right call when the plastic has split but the arm underneath is fine.
Listed for the ISA Professional only. Our team at Laverton North and Epping can check your machine against the part if you are not certain.
$49.00 AUD
SICO part number 8, the plastic shell for the pressing arm, made for the Micra Professional. The pressing arm shell takes the knocks in daily use and cracks long before the mechanism underneath wears out.
This shell is for the Micra Professional. Other SICO machines take their own version, so quote your model when you order and we will match it.
$26.80 AUD
SICO part number 16, a universal welding element in 2.5mm width, priced per 50cm length. The element is the wire that does the actual sealing, and it is a consumable on any bar sealer that gets steady use.
Measure the bar on your machine and order the length you need. If you want us to work it out, tell us the model and we will do the sums.
$66.00 AUD
A SICO transformer, 240 to 12V, for the Nevada vacuum sealer. It steps the supply down for the control side, so a dead transformer usually shows up as a machine with power at the plug and nothing happening at the panel.
Listed for the Nevada. Confirm your model with us before ordering, since the other SICO ranges use different transformers.
$13.40 AUD
The plastic oval reservoir air release for the SICO S-Line series. The reservoir catches liquid drawn out of the bag before it reaches the pump, which is what keeps the pump alive on wet products.
This oval version is for the S-Line. Check whether your machine takes the oval or the square reservoir before ordering, and we will confirm it if you tell us your model.
$13.40 AUD
The SICO plastic reservoir air release with the release valve fitted, 30 x 30 x 5mm. The valve lets the reservoir vent at the end of the cycle.
There is also a version without the valve, so it is worth checking which one came out of your machine. Measure yours at 30 by 30 by 5mm, and give us your model number if you would like it confirmed.
$6.30 AUD
The SICO plastic reservoir air release without a valve, 30 x 30 x 5mm. This is the plain version, so if your machine uses the type with the release valve fitted you will need the other one.
Measure the part you are taking out and check whether it has a valve. Send us the model, or bring the old one into Laverton North or Epping and we will match it.
$17.40 AUD
The SICO pressure gauge indicator. It shows what vacuum the machine is actually pulling, which is the difference between diagnosing a problem and guessing at it. A gauge that sits at zero or refuses to move is usually the gauge rather than the pump.
Listed for SICO machines. Tell us your model and we will confirm this is the right gauge before you order.
$4.50 AUD
The blue rubber square gasket for the SICO air reservoir section, 30 x 30 x 3mm. It seals the reservoir so the machine can hold vacuum properly, and once it takes a set it will leak quietly rather than obviously.
Measure your existing gasket against 30 by 30 by 3mm before ordering, and send us your model if you would like it confirmed.
$17.40 AUD
The SICO S-Line Professional air valve for wet or soft products. Soft and wet items need a gentler approach than a dry bag of coffee, and the valve is part of how the machine manages that.
Listed for the S-Line Professional. Check your model plate before ordering, and if you are caught between the Nevada and S-Line versions just ask us and we will sort it out.
$4.00 AUD
The 40mm O ring for the oval reservoir cover plate on the SICO S-Line. It seals the cover against the reservoir, and a perished ring shows up as a machine that will not hold vacuum no matter how good the bag is.
Cheap to replace and worth doing before chasing bigger faults. For the S-Line. Ask us to confirm against your model if you are not certain.
Product Overview
The S-250 Basic Vacuum-Packaging Machine by SICO KITCHENWARE® Italy is perfect for families who want a simple, effective way to keep food fresh and reduce waste. It has a 250mm sealing bar with manual operation, making it easy to use for various packaging needs.
Technical Specifications:
- Model: S-250 Basic Vacuum-Packaging Machine - White
- Operation: Manual sealing with adjustable time settings
- Material: Durable ABS body
- Capacity: Works with bags, rolls, and containers
- Size and Weight: 370 x 255 x 115 mm; 4 kg
- Included Components: 160 cm power cord
- Origin: Designed and produced in Italy.
Customer Notice:
Please note that the delivery packaging may differ from the machine’s dimensions as this is a fragile product and requires special handling for safe transport.
Features:
-
Adjustable Sealing Time
With 10 sealing levels, you can adjust the settings based on the bag type and food, ensuring a perfect seal every time. This keeps your food fresh longer and helps prevent waste. -
Double Filter Pump Protection
The pump is protected by a double filter that prevents dust and liquids from causing damage, making the machine last longer and reducing the need for maintenance. -
Versatile Compatibility
This machine works with different packaging types, including bags, rolls, and containers, making it versatile for storing various food items, from leftovers to bulk goods. -
Powerful Vacuum Pump
The strong, maintenance-free pump with cooling features allows for continuous use without overheating, perfect for busy kitchens that need to seal large quantities of food. -
Compact and Durable Design
Made from sturdy ABS with anti-skid feet, the S-250 is stable and fits neatly into any kitchen. It’s easy to clean and built to last, providing a reliable way to preserve food.
Safety and Material Quality:
Constructed from durable ABS material with features to prevent overheating, ensuring safe use.
Cleaning and Maintenance:
Includes removable filters and gaskets for easy cleaning. Store in a dry place when not in use.
Warranty Information:
We provide a warranty under Australian Consumer Law.
For more using instruction videos: CLICK HERE
Showing 90/134
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.