New Customers get 5% OFF
Fast Shipping
Expert Advise
New Customers get 5% OFF
Fast Shipping
Expert Advise
New Customers get 5% OFF
Fast Shipping
Expert Advise
New Customers get 5% OFF
Fast Shipping
Expert Advise
New Customers get 5% OFF
Fast Shipping
Expert Advise
New Customers get 5% OFF
Fast Shipping
Expert Advise
- All categories
Your cart
Built to handle large catalog
Maximize' exclusive deal: After purchasing, you’ll receive: Free theme design & setup and 2 months free access to 200+ advanced sections & templates.
Explore full power of Maximize Theme
Choose your Location
-
Epping
Free
Usually ready for pickup in 24 hours
218 Cooper St, Epping VIC 3076
📞 (03) 9422 1711
🕐 Mon – Fri: 9 am – 5 pm
Sat: 9 am – 1:30 pm
Sun: Closed -
Laverton North Branch
Free
Usually ready in 24 business hours
Unit 2/176-178 Cherry Ln, Laverton North VIC 3026
📞 (03) 9422 1711
🕐 Mon – Fri: 9 am – 3 pmSat: 9 am – 1:30 pm
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
Vacuum Sealer Accessories
A vacuum sealer is a machine you keep, not a machine you replace. The reason we carry parts right down to the fuse is that these units are worth repairing, and a sealer that has done ten summers of passata and prosciutto usually just needs one consumable swapped.
Sealing bars are the part that wears. We stock the SICO Premium complete sealing bar in 250mm and 700mm, the bar magnet cover plate for the Series 250 Premium, the gasket seal for the SICO polycarbonate jar lid, and the 2.6 ohm fuse for the SICO electrical board. Teflon H45 is sold by the metre and it is the strip that stops the bag welding itself to the bar, so it is the first thing to check when your seals start going patchy. For EquipPro machines there is the electronic card for the T-Matic and rubber feet for the Pro50 and Pro80. The machines are here too: the EquipPro T-Matic, TPRO50, TPRO80 and TPRO80GAS, the FLB Orion with its auto features, and the Incasa 110W with pulse suction for lighter home use.
The tip most people need is to let the bar cool between long runs. Sealing bag after bag with no pause is what cooks the Teflon and shortens the life of the element underneath it.
Bring the machine in to Laverton North or Epping and we will match the part. Also see Vacuum Sealers, Vacuum Bags, Preserving and Smoking & Curing.
A vacuum sealer is a machine you keep, not a machine you replace. The reason we carry parts right down to the fuse is that these units are worth repairing, and a sealer that has done ten summers of passata and prosciutto usually just needs one consumable swapped.
Sealing bars are the part that wears. We stock the SICO Premium complete sealing bar in 250mm and 700mm, the bar magnet cover plate for the Series 250 Premium, the gasket seal for the SICO polycarbonate jar lid, and the 2.6 ohm fuse for the SICO electrical board. Teflon H45 is sold by the metre and it is the strip that stops the bag welding itself to the bar, so it is the first thing to check when your seals start going patchy. For EquipPro machines there is the electronic card for the T-Matic and rubber feet for the Pro50 and Pro80. The machines are here too: the EquipPro T-Matic, TPRO50, TPRO80 and TPRO80GAS, the FLB Orion with its auto features, and the Incasa 110W with pulse suction for lighter home use.
The tip most people need is to let the bar cool between long runs. Sealing bag after bag with no pause is what cooks the Teflon and shortens the life of the element underneath it.
Bring the machine in to Laverton North or Epping and we will match the part. Also see Vacuum Sealers, Vacuum Bags, Preserving and Smoking & Curing.
134 products
134 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$95.00 AUD
The weld seal bar assembly for the Reber Family vacuum sealer. This is the bar that makes the actual seal, so it is the part to replace when bags stop sealing cleanly along the line. Supplied as the assembly. The model name is spelled oddly on this listing, so confirm your Reber vacuum model with us before ordering.
$35.00 AUD
Two black rubber seal gaskets for Reber vacuum machines, each 300mm long by 8mm wide and 8mm high, supplied as a top and bottom pair. Seals harden and flatten with heat cycles, and that is usually where a lost vacuum starts. Measure your seal channel against the 300mm length, and the team at Laverton North or Epping can help identify your model.
$0.40 AUD
A zinc plated screw, 3.5mm diameter by 16mm long, stocked as a SICO spare. Small fasteners go missing during a repair and it is worth grabbing a few while the machine is apart.
No model is listed against it, so check the thread and length against the screw you are replacing, or bring one in and we will match it.
$24.90 AUD
A weld Teflon strip for the SICO Alpina. This part is marked discontinued, so what we have is what is left and we cannot reorder it once the shelf is clear.
Listed for the Alpina. If you run a different SICO machine, do not assume it crosses over. Check with us at Laverton North or Epping and we will look for the current equivalent.
$95.00 AUD
SICO electronic card GE09 for Nevada models built from 2019 onwards. The Nevada changed boards during its run, so this is the later card and it is not the same part as the pre 2018 version despite sharing the code.
Read the code and the date off your existing board before ordering. We can check it for you if you send a photo through.
$95.00 AUD
SICO electronic card GE09 for Nevada models built before 2018. SICO changed the board part way through the Nevada run, so the pre 2018 and post 2019 cards are not the same item even though the model name is.
Check the date and the code on the card you are replacing, or send a photo to Laverton North or Epping and we will tell you which one you need.
$96.10 AUD
SICO electronic card GE-07 for the 250 GN Plus models. The card is the control board, and it is usually what you are chasing when a sealer powers up but will not run its cycle properly.
Cards are model specific and this one is for the 250 GN Plus. Check the code printed on your existing board before ordering and we will confirm the match.
$59.10 AUD
SICO electronic card GE-14 for the LED 250 GN Plus models, noted on the listing as ISA. The LED version of the 250 GN Plus takes its own board, so this is not the same card as the standard model.
Read the code off the board you are pulling out and check that it says GE-14, or ask us and we will confirm before you order.
SICO electronic card GE 09 for the SLine series, covering the S350, S550 and S700 models built before 2020. The cut off matters, since the boards changed after that and the later machines take a different card.
Confirm the code printed on your existing board before ordering. We are happy to check it for you if you send through a photo.
$85.00 AUD
The SICO GE-10 electronic card, the circuit board to suit the Conservotta Professional. The card runs the timing and control side of the machine, so an intermittent or dead sealer with a healthy pump often comes back to the board.
For the Conservotta Professional. Cards are model specific, so confirm yours carries the GE-10 marking, or send us a photo before ordering.
$99.00 AUD
The SICO GE-7 electronic card, the circuit board for the ISA Professional. This is the board that controls the vacuum and seal cycle, and it is not interchangeable with the other cards in the SICO range.
For the ISA Professional. Check the code printed on your existing board reads GE-7, or send through a photo and we will confirm it before you order.
$95.00 AUD
SICO electronic card GE16 for the Domestic Soft Vacuum series. It is the board that runs the vacuum and weld cycle on those machines, and replacing it is the standard fix when the control side has failed but the pump is sound.
Read the code off your old card first. If it does not say GE16, give us a call and we will find the right one.
The GE16 electronic card for the SICO Sline soft vacuum series. It is the board that runs the cycle, so if the machine has gone unresponsive or drops out mid cycle this is often where the fault sits. Confirm your machine is from the Sline soft series and that GE16 is the card fitted before ordering, since boards are not interchangeable.
$99.00 AUD
The SICO electronic card for the Micra Plus Professional, the machine's circuit board. Boards run the vacuum and seal timing, so a machine that behaves erratically rather than simply failing is often pointing here.
This one is for the Micra Plus Professional and does not cross over to other SICO models. Confirm your machine before ordering, and we can check the board markings with you.
$91.50 AUD
Code: 128735
SICO jar sealing attachment allows you to vacuum seal split-lid jars without boiling. Simply connect to your SICO vacuum machine and place tool over loosely screwed lid. Vacuum will form under the lid sealing it and preserving the contents.
Using our lid sealing attachment in addition quality jars will ensure proper seal of all your foods - great for preserving! Simply place the lid over your jar then attach the SICO jar sealing tool to the top and watch as all the hard work is done for you - it's as simple as that!
This enables your produce to be left on the pantry shelf for an extended time until you are ready to eat!
Made in Italy
$29.00 AUD
A long black rubber gasket from SICO, 8mm high, used as the bottom or top seal. When a chamber machine stops holding vacuum, a flattened or split gasket is the usual culprit and this is the part that fixes it.
The listing does not name a model, so measure the channel on your machine and check the length with us at Laverton North or Epping before ordering.
$6.00 AUD
The Marlin cap flat seal for the S-Line pump piston, 27mm outside diameter by 1mm, in beige. It is the flat seal that sits on the piston face, and it hardens and shrinks with heat and hours.
Listed for the SICO S-Line. Measure the seal you are taking out against 27mm before you order, and we will confirm it for you if you ask.
$10.00 AUD
The Marlin cap seal for the pump piston, 25mm outside diameter by 1mm, beige, for the SICO S250 gn. The seal rides in the bore and does the work of pulling the vacuum, so it is the first thing to look at when a pump has gone lazy.
Measure yours against 25mm before ordering, since the S-Line seal is a different size. Ask us if you need it confirmed.
$9.00 AUD
The SICO micanite board for the Nevada S300. This is the insulating layer under the sealing element, and a scorched or broken board is a common reason for a seal that looks fine at one end and fails at the other.
Cut for the Nevada S300. Model matters here, so confirm yours before ordering, or send us a photo and we will check.
$11.00 AUD
The SICO micanite board for the S250. Micanite is the insulating board that sits behind the sealing element, keeping heat where it belongs and off the bar. It chars and crumbles over time, which is when your seals start coming out patchy.
This one is cut for the S250. Micanite is cut to model, so check your machine before ordering or ask us to confirm.
$12.00 AUD
The SICO micanite board for the S250 Premium. It insulates behind the sealing element so heat goes into the bag rather than the bar. Worth replacing at the same time as the element while you have the bar apart.
Cut specifically for the S250 Premium, not the standard S250. Double check which version you have, and we will confirm it if you send the details.
$16.00 AUD
The SICO micanite board for the S350. It sits beneath the sealing element as the heat insulator, and once it breaks down the element loses its backing and the seal goes with it.
Cut to suit the S350 bar length. Boards do not swap between models, so check your machine before ordering, and our team at Laverton North or Epping can confirm it.
$18.00 AUD
The SICO micanite board for the S460. The board insulates behind the sealing element and holds it flat against the bar. A crumbling board is worth catching early, because it usually takes the element with it.
Cut for the S460. These are model specific, so confirm the machine you are working on before ordering and we will verify it if you are unsure.
$20.00 AUD
The SICO micanite board for the S550. It is the insulating strip under the sealing element, sized to the S550 bar. Replace it whenever you are in there changing an element, since a tired board will spoil a brand new one in short order.
Not interchangeable with the other bar lengths, so check your model first, or ask the team at Laverton North or Epping to confirm.
$22.00 AUD
The SICO micanite board for the S700, the longest bar in this group. It insulates the sealing element from the bar, and at this length a scorched section in the middle is easy to miss until seals start failing there.
Cut specifically for the S700. Confirm your bar length before ordering, and send us the model number if you would like us to check.
$257.40 AUD
Code: 127457
30mt roll of replacement SICO teflon weld strips to suit Micra vacuum sealer.
Specifications:
Suits SICO Micra vacuum sealer machine
Size: 30mt x 1cm
$9.00 AUD
The SICO micro switch that starts the pump cycle. It is the switch the lid presses when you bring it down, so if the machine is dead but everything else checks out, this is one of the first things to look at.
Listed for SICO sealers. Tell us which model you are running, or bring the unit into Laverton North or Epping, and we will confirm this is the correct switch.
$15.00 AUD
Product Overview
The Sico Part No 2.4 Upgrade for use with the SICO Nevada and S250 Premium vacuum sealers. This regulator allows users to adjust the maximum vacuum pressure, which is ideal for sealing wet or soft products. It fits the first-release models, enhancing the versatility and control of your vacuum sealing process.
Technical Specifications:
- Model: Sico Part No. 2.4
- Operation: Replaces the filter cover in SICO Nevada and S250 Premium vacuum sealers
- Material: Durable plastic
- Capacity: Adjustable vacuum pressure settings
- Size and Weight: 30 x 30 x 5 mm; packaging details vary
- Included Components: Vacuum pressure regulator plate
Key Features:
- Adjustable Vacuum Pressure: Customizes vacuum pressure for different product types, such as wet or soft items, by turning the dial on the valve.
- Manual Operation: When set to lower vacuum pressure, the heat seal function must be activated manually, providing precise control.
- Reverts to Standard Pressure: Closing the valve fully restores the machine to its default vacuum pressure setting.
- Compatibility: Specifically for first-release models of SICO Nevada and S250 Premium vacuum sealers.
Safety and Material Quality:
Made from robust plastic, the regulator plate offers reliable functionality. As a replacement upgrade, it is not included in the original package, and while it enhances performance, consistent results cannot be guaranteed compared to the original parts.
Cleaning and Maintenance:
Ensure the regulator plate is clean and properly maintained to ensure optimal function. Adjust the heat setting slightly higher when using lower vacuum pressure for a proper seal.
Important Note:
This is an aftermarket upgrade part designed for first-release models. It may not perform identically to the original components, and its effectiveness can vary.
$19.00 AUD
Code: 129004
Replacement bottom rubber gasket for the SICO Nevada vacuum sealing machine.
Specification:
- To suit SICO Nevada model
- Size: 300mm x 8mm
$19.00 AUD
Code: 129005
Replacement top rubber gasket for SICO Nevada vacuum sealing machine.
Specifications:
- Suits SICO Nevada
- Size: 300mm x 12mm
Showing 60/134
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.