Bottles & Closures

A 400 watt heat shrink capsulator in a durable stainless steel body, for applying capsules quickly and evenly. Slip on the capsule, give it a moment under the heat, and it hugs the neck with a clean, glossy finish. A small investment that lifts the look of every bottle you make.

A bench mounted heat shrink capsulator with a stainless steel body, made to finish your bottles with a tidy, professional capsule. Set the bottle in place and the even heat shrinks the capsule snugly to the neck in seconds. It is the little touch that makes a home bottled wine look the part on the table or the shelf.

A Benchmate manual round bottle labeller. This is the display unit, a used item in excellent condition, so it has been on the floor rather than in a production line. Manual operation and sized for a bench. Being a one off, come and have a look at Laverton North or Epping, or ask us for photos and a rundown of its condition first.

Code: 129568

These mash tuns are designed to minimise temperature loss throughout a 1 hour+ mash.

Includes a stainless steel weldless spigot and stainless steel false bottom.

A stainless steel triclover ferrule fitting with a half inch BSP female thread, for joining triclover gear to threaded fittings. Triclover connections make for a quick, hygienic seal that pulls apart in seconds for cleaning. A versatile little adapter for the home brewery build.

The spring for a Demaria fill gun. Springs tire out with use, and a gun that will not return properly or keeps dripping after the trigger is released is very often just this.

A few dollars against replacing the whole gun. Make sure yours is a Demaria before ordering, and bring the gun in if you want us to confirm the part.

Taper corks in a four pack, assorted diameters from 40 to 45 mm and 45 mm high, with sizes listed as approximate. This is the step up from the smaller pack, for wider necked demijohns and jars.

Because the taper does the sealing, a size either way often still works. Measure the neck opening first, or bring the vessel in to Laverton North or Epping and we'll fit one.

A Duotight push-in automatic beer flow stopper for keg filling, sized for 8mm OD line. It shuts the flow off by itself once the keg is full, so you are not standing over it waiting for foam to appear at the top. The push-fit connection means no clamps or spanners.

Confirm your line is 8mm outside diameter before ordering, and sing out if you're unsure.

A set of 6 bell shaped cone seals to suit the Grifo gravity filler nozzle. Fresh seals keep your filling neat and leak free, so your wine goes into the bottle and not over the bench. A handy pack of spares for the home bottling day.

Code: 129309

This bottle filling gun works with almost any bottle size and shape. Can be used for bottling beer or wine, or dispensing directly into a glass.

Includes beer line and two (2) stainless clamps.

L__cm x W__cm x H__cm

This bottle filling gun works with almost any bottle size and shape. Can be used for bottling beer or wine, or dispensing directly into a glass.

Includes beer line and two (2) stainless clamps.

Italian‑made paletta crafted from durable Faggio (beech) timber. Ideal for stirring polenta, sauces, jams, and thick mixtures. The long handle offers comfortable reach and control while being gentle on cookware. A classic, reliable tool for everyday cooking.

Approximate dimensions

• Handle: 35 - 40 cm

Quality food grade silicone washer for all your 1/2inch stainless brewery hardware. These washers are compatible with any 1/2 BSP plumbing hardware.

The silicone rubber in these washers is high temperature suitable for temperatures up to 250C and higher. This is made from food grade silicone and will not perish like some other rubber washers.

Dimensions: : 21mm(ID) x31mm(OD) x 2mm (thickness)

A replacement gear stop for the Enolmatic bottle filler, made by Tenco. A small component, sold individually, and easy to overlook until the machine stops behaving.

It suits the Enolmatic and nothing else in our filler range. If you are not certain this is the piece that has failed, send us a photo along with your model and serial number and we will check it against the parts diagram.

Stainless Steel 304 multi purpose 4-inch to 2-inch concentric reducer. Ideally suited to reduce the top of your Kegmenter to a 2-inch opening

A stainless steel K-Lok (Kinglock) female to female adapter with 5/8 inch BSP threads, for joining your fittings quickly and cleanly. The dry break design keeps drips to a minimum when you disconnect. A tidy way to link up your draught and transfer lines.

A stainless steel reducing bush, female 25mm down to female 19mm BSP, from Kegland. It is the small fitting that saves you rebuilding a line when two components do not share a thread size.

BSP and NPT threads look similar and are not, so check what you are joining before ordering, or bring the fittings in and we will match them.

A concentric reducer cone in 304 stainless, stepping a 2.0 inch triclover down to 1.0 inch. Concentric means the centreline stays put through the reduction, which keeps a run tidy. Check both ends against your existing fittings before ordering, or bring them into Laverton North or Epping and we will match them up for you.

Tapered corks from Ferrari, measuring 21mm at the narrow end, 25mm at the top and 39mm tall. The taper lets them push into a range of neck sizes and sit proud enough to pull out by hand.

Listed under jar closures. Measure the internal neck of whatever you are corking against those three figures before you commit to a quantity.

A professional muselet tool for seating the wire cage over champagne and sparkling corks on larger format bottles. It positions and tensions the wire neatly, so your cork stays put under pressure with a tidy, finished look. Made for those who take their bubbles seriously.

A single spare spring from Ferrari for the pedestal corker, the one that sits under the bottle plate. It returns the plate after each cork, and it is an easy part to overlook when a corker starts feeling wrong.

The spring located with the jaws is a separate listing. Check which one has failed before ordering, or ask us and we will talk it through.

A stainless steel lock nut, 0.5 inch female BSP. It backs off against a fitting and holds it in place once set.

Sold individually. Nothing complicated about it, but the thread has to be right. If you are working from a fitting you have pulled out, bring it in to Laverton North or Epping and we will size it against what is in the drawer.

A push in DuoTight beer line joiner, 8mm (5/16) to 5/8 female, for connecting your lines quickly and cleanly. The push fit design makes joining and swapping EVABarrier line simple, with a reliable, leak free seal. A handy joiner to keep in the kit.

A bottle brush with stainless steel bristles, made for scrubbing out the inside of bottles. Stainless holds its shape better than nylon when you are working through a full crate.

Sold as a single brush. If you want to check the length and head size against the bottles you are using, we have them on the shelf at Laverton North and Epping.