All Accessories

A nickel plated Algor ball valve, 1 inch, 25mm, BSP male inlet to 1 inch, 25mm, DIN male outlet, with a quarter turn lever handle.

Sold individually. DIN and BSP fittings do not swap over, so it pays to check what is already on your tank. Send us a photo of the outlet you are connecting to and we will confirm this valve suits.

An Algor stainless steel ball valve, 1 inch, 25mm, BSP male inlet to 1 inch, 25mm, DIN male outlet.

The supplier's title trails off at the end, so there may be a further detail we cannot confirm from the listing alone. Sold as one valve. Ask us before ordering and we will look at the valve on the shelf and tell you exactly what it is.

A butterfly valve with a 1 inch, 25mm, BSP male inlet and a 1 inch, 25mm, BSM male outlet. Male on both ends, so it goes between two female fittings, with a quarter turn handle.

Sold individually. There is a companion listing with a female BSP inlet if that is what you need instead, and we are happy to check which suits before you order.

A butterfly valve with a 1 inch, 25mm, BSP female inlet and a 1 inch, 25mm, BSM male outlet. Quarter turn from open to shut, which is why they earn their place on tank work.

Sold as one valve. Inlet and outlet run on different thread standards here, so check both ends against your setup, or send us photos and we will confirm it.

A stainless steel manway lid from Algor, 430mm internal diameter and 4cm in height, described by the supplier as suitable for a distillation drum. Sold as the lid and hatch.

Manway openings vary between tanks, so the 430mm ID is the number to check against yours. Send us the measurement across your opening and we will confirm whether this lid sits properly.

The white plastic female nut on its own, 32 DIN, made to suit the bent hosetail and a 32mm male ball valve. Sold as the nut only, with no tail included, for when the nut is the part that has cracked.

If you are not sure whether your valve is the 32mm DIN type, send us a photo and we will confirm it before you order.

A white plastic hosetail with a bend, made to suit a 25mm male DIN stainless ball valve with a female nut. It gives you a neat, angled connection for running hose off your valve. A handy fitting for tidying up transfers around the brewery or cellar.

A clear plastic pourer with a flip seal, so the spout closes over between pours and keeps fruit flies and dust out. Cheap enough to run through a whole back bar and replace when they get tired. No neck size is recorded on this listing. Check the bottles you intend to use them in, and ask us for the measurement if you are ordering in quantity.

A dust cap for the Posi series pourers, keeping the spout covered between services so you are not pouring last week's dust into a drink. Cheap insurance on an open bottle. It is listed for the Posi series pourers only. If your pourers came from a different range, check the spout diameter with us before ordering a batch of these.

A wall mounted bottle opener for twist and crown caps, so there is one permanently fixed where the drinks get opened. Handy at the bar, in the shed or beside the brewing fridge. Mounting hardware is not listed with it, so check what suits your wall. Pair it with a cap catcher underneath if you are tired of standing on bottle tops.

A large Liverani stainless steel pump trolley, 60cm x 35cm, made to suit the EP Minor and CP Mono pumps. Wheels under a heavy pump turn a two person lift into a one person job. It suits those pump models only. Measure your pump footplate against the 60cm x 35cm deck before ordering, or give us the model and we will check it for you.

A stainless steel pourer with a long spout, listed for olive oil and spirits. The longer spout gives you better control over where the pour lands, which matters with oil more than most people expect. A cap is optional and is not included by default. Check the neck of your bottles before ordering, and ask us if you want the cap added.

A small stainless steel Liverani pump trolley measuring 33cm x 24cm, made to suit the Minor, Major and CP Mono pumps. Getting a pump off the floor and onto wheels makes cellar work far less of a wrestle. It suits those pump models only. Check your pump against that list and measure the footplate before ordering, or send us the model and we will confirm.

A cocktail shaker with a glass top, so you can watch the drink come together and judge the dilution by eye rather than by faith. Suits home bars and anyone who likes the look of a proper shaker on the shelf. No capacity is stated on this listing, so ask us for the measurement if that matters for your recipes.

A replacement cap with black stopper for the stainless steel Free Spirit flo pourer, keeping dust and fruit flies out of an open bottle between pours. The title on this listing is cut off where it explains the pack options, so the quantity you receive is not clear from the page. Ring us or ask in store and we will confirm the pack size before you order.

A wall mounted stainless steel catcher that sits under your opener and collects crown caps as they drop, instead of letting them skate across the floor. Simple bit of kit that keeps a bar or brew bench tidy. Mounting hardware is not listed with it. If you are pairing it with a particular opener, check the spacing with us before you drill.

A stainless steel crown cap bottle opener that screws to the wall, so there is always one where you need it and it never walks off. Handy beside the bar, the brew bench or the shed fridge. Fixings are not listed with it, so check what you have on hand for your wall type. Ask us if you want a look at one in Laverton North or Epping.

A pourer for olive oil bottles, with a flip lid that keeps dust out between uses. Made in the USA. It gives you a controlled pour rather than a glug, and the lid means you are not pulling the pourer in and out every single time. Check the neck size of your bottles before ordering a batch of them.

The 650ml VacuVin coffee saver keeps your ground coffee fresh by drawing out the air that stales it. Pump out the oxygen and your beans hold their aroma and flavour far longer than in an ordinary tin. A clever container for anyone who takes their morning cuppa seriously.

About this item

• MARINATES IN MINUTES - Elevate your culinary creations with this Vacu Vin Vacuum Container. Whether it's meat, fish, poultry, or vegetables, achieve exceptional tenderness and flavor in just minutes
• IDEAL FOR COOKING - Take your home cooking to new heights with this versatile vacuum container. This container saves you time and ensures flavorful results that will leave everyone asking for more
• SAVES TIME - Say goodbye to long marinating times. Simply place your ingredients in the container, extract the air using the included vacuum pump, and watch as the flavors infuse rapidly
• RELEASE VACUUM EFFORTLESSLY - Releasing the vacuum seal is a breeze with the Vacu Vin Vacuum Container. Just push the valve on top of the lid, and the container will open smoothly
• UNPARALLELED VERSATILITY - This vacuum food containers set offers unparalleled versatility in your kitchen, providing vacuum sealed containers for food storage as well as instant marinating

A digital hygrometer and thermometer from the ECO range, reading indoor and outdoor with a min and max memory. The min and max record tells you what happened overnight, which matters far more than the reading right now when you are curing or ageing. Ask at Laverton North or Epping if you want a look at the display first.

Wet antibacterial wipes for thermometer probes, 200 to a pack. Individually wrapped and sized for a quick wipe between readings, so you are not carrying the last measurement into the next one. Follow the directions printed on the pack by the manufacturer. Stocked at Laverton North and Epping if you would rather grab a pack while you are in.

Retroshield Insulation, sold per meter.

Excellent for wrapping demijohns and fermenters to keep a stable temperature while fermenting beer, cider and wine.

22mt length per full Roll

Sold / price per metre Ht135cm

The best pocket corkscrew, with double support and the original, unbeatable articulated levers that stop the cork from bending and breaking at the end of the uncorking process, ideal for both left and right-handed people. Features a Teflon screw and knife blade.

A deluxe waiter's friend corkscrew in black. The lever style is the one most people behind a bar actually reach for, because it folds down into a pocket and pulls a cork with far less effort than a plain screw.

Black finish, with the worm and the blade folding away when you are done. A good one lasts a very long time and does not mind being knocked about.

A euro style beer jug holding 1140ml. A straightforward jug for the table, the sort you fill once and pour from all afternoon.

Sold individually and supplied through Ken Hands. If you are after a set for a bar or a function, let us know how many you need and we will check what we can hold for you at Laverton North or Epping.

An Algor sample valve in AISI 316 stainless steel, 1/2 inch BSP, supplied with the nut. The 316 grade is the step up from 304 in our sample valve range.

Sold as one valve with nut. If you are replacing a sample point on an existing tank, send us the thread and the wall thickness and we will check this one fits.

An Algor sample valve, 1/2 inch, in AISI 304 stainless steel. The supplier notes that it also suits 1/2 inch oil tanks. It draws a small sample without opening the vessel.

Sold individually. There is a 316 version in our range as well if that is what your application calls for, and we can talk you through the difference if you are unsure.