All Accessories

Lid only to suit the 1.2 litre black plastic spittoon. Sold as the lid on its own, so this is a replacement rather than a complete spittoon.

Made in Italy. Confirm it matches the 1.2 litre black spittoon you already have before ordering, as the lid will not cross to a different size or model. Ask at the counter if you are unsure.

A stainless steel lime squeezer with a built in strainer, for getting every last drop of juice while holding back the pips. Sturdy and easy to clean, it makes quick work of limes and lemons for your cooking and cocktails. A small tool that earns its spot in the drawer.

A 425 ml beer glass in the Sheffield Keller style, from Ken Hands. The Keller shape is the classic dimpled German stein profile, heavy in the hand with a solid handle, and 425 ml is the familiar Australian pot and a half pour.

Sold as a beer glass rather than part of a set. Ask us about quantities if you are after a few.

Lime Squeezer Strainer Stainless Steel is specifically designed for efficient juice extraction. This tool ensures you won’t waste a single ounce of juice, making it a must-have for any cocktail enthusiast.

With this squeezer, you get juice that is completely free of pulp, seeds, and peel. Plus, you’ll avoid any annoying spritzing onto your hands during use, allowing for a cleaner and more enjoyable experience.

The Stainless Steel Ice Bucket delivers reliable performance, with a generous 13-litre capacity, it keeps your drink station fully stocked without constant refilling. The seamless, heavy-duty stainless steel construction resists rust, cracks, and chips, ensuring years of dependable use in demanding hospitality environments.

An ergonomic handle makes transport effortless and reduces the risk of hand contamination. Ideal for home, restaurants, cafes, bars, and catering operations that demand durability and efficiency.

Made for the big vessels, this 90 cm brush with an 8 cm expanding bristle head reaches the base of a 54 litre demijohn with ease. The long, flexible shaft follows the curve of the glass, so every corner comes up clean. A must have before you fill, and again once you have emptied.

A long 90 cm cleaning brush with an 8 cm expanding bristle head, made for reaching right to the bottom of a 54 litre demijohn. The flexible shaft bends around the shoulder of the vessel, so nothing gets left behind. Clean gear makes better wine, and this takes the struggle out of it.

A pair of deluxe sommelier free pourers, ready to slip straight into your bottles for a smooth, drip free pour. They control the flow beautifully, whether you are serving wine, oil or spirits, and add a touch of class to the table. Simple, elegant, and genuinely useful.

The Tavernello Art 45 cork extractor in black, boxed and ready to gift or keep for yourself. Its twin lever action grips and draws the cork smoothly, taking the struggle out of opening a good bottle. A handsome, reliable opener that will serve you for years.

The Tavernello cork extractor in red, listed by Ferrari as Art 45 and supplied in its box. A dedicated extractor makes short work of corks that a standard waiter's friend would tear apart.

It arrives boxed, so it is tidy enough to give as a gift. Ask us if you want to see one in the hand before you buy.

A brass adapter for a wood barrel, sized 15 to 25mm, with a 12.5mm female BSP parallel thread. It lets you put a modern threaded fitting into a barrel that was never designed for one.

Barrel holes are rarely uniform, so measure yours before ordering, or bring the barrel to Laverton North or Epping and we will size it on the spot.

A hose clip for 8mm tube or PVC hose, listed by Ferrari under reference 16540. It is the small clamp that stops a racking line popping off halfway through a transfer, which is a mess nobody wants twice.

Sized for 8mm hose. Measure the internal diameter of the line you are using before ordering.

A cleaning brush for a 54 litre demijohn, 90 by 8cm with an expanding bristle head. The expanding head is what lets it get past the narrow neck and then open out against the shoulders of the vessel.

Sized to suit around the 54 litre demijohn.

This Throttle Flow Stop Valve is designed for use with syphon systems and fits an 8mm internal diameter hose. It allows precise control of fluid flow, helping to regulate and stop the flow as needed. Made with reliable materials, it ensures durability and consistent performance in various applications. Ideal for maintaining efficient and safe operation in your syphon setup.

The Eco syphon kit from Ferrari, with two metres of 10mm internal diameter wine transfer hose. Racking by syphon leaves the lees sitting in the bottom of the vessel, which is the whole point of doing it that way.

A cheap bit of kit that saves a lot of mess. Check that 10mm suits the taps and fittings you already have. Stocked at Laverton North and Epping.

Thirty rippled stainless steel plates in a compact 315mm x 73mm x 73mm body, built for rapid chilling. The rippled plate design drives turbulence across a large surface area, so heat comes out of your liquid quickly as it passes through.

A serious bit of kit for anyone tired of waiting on an immersion coil. Our Laverton North and Epping counters can talk you through the fittings you'll need to plumb it in.

Propylene glycol at 99 percent, food grade, in a 5 litre container, supplied by Keg King and listed under refrigeration accessories. That is the extent of what this listing describes. For dilution, handling and any question of suitability, go by the label on the container and the manufacturer's own documentation rather than anything written on this page.

A butterfly valve made up as a custom fit, taking a 2 inch triclover inlet through to a 2 inch, 50mm BSM male outlet. Puts a quarter turn valve between two fitting standards without a stack of adapters in between. Because it is a custom build, confirm both ends against your tank and pipework with us before you order.

An Algor butterfly valve, 25mm BSP male inlet to 25mm BSM male outlet, with a metal handle. Metal handles stand up better than plastic where a valve gets worked hard.

Sold as one valve. The supplier's title is cut short at the end, so ask us if you want the handle detail confirmed and we will look at the one in stock.

A white plastic hosetail with a bend, made to suit a 32mm male DIN stainless steel ball valve, with a female nut. The bend turns the hose down without kinking the line.

Sold as the hosetail. It suits that 32mm DIN valve, so if yours is a different size or standard, send us a photo and we will tell you what you need.

An Italian made nickel plated ball valve, 25mm BSP male on both ends. Male to male, so it sits between two female fittings, with a quarter turn lever.

Sold as one valve. We hold these in numbers, so they are generally on the shelf at Laverton North and Epping. Bring your fitting in if you would like the thread checked first.