Spirits & Distillation

Introducing the Gen3 FermZilla Tri-Conical. Now with 3 Inch Tri-Clover ferrule moulded into the tank and a 600mL Collection container with a 3 Inch Tri-clover connection, the gold standard for sanitary design and effortless removal. 

This unit was born from customer feedback we received on the Gen2 Model. No more complicated dump valve designs here, just simplicity. Brew with confidence on the new Tri-Clover FermZilla Range.

The new FermZilla is a revolution in home brewing allowing home brewers and small micro-breweries a level of control that meets everyone's budget. With the FermZilla you have many of the benefits of a much more expensive stainless conical fermenter but with the additional benefit of being able to see the fermentation process in action and also ferment at pressures up to 2.4bar.
This is an incredible product at an extremely attractive price point in all the different sizes and models.

The FermZilla 27L Tri-Conical can be used in the following ways:
KL25898 ~ Basic Gravity Fermenter - New Brewers
KB07201 ~ Pressure Brewing Kit - Most Popular
KB07249 ~ Hop Bong Pressure Kit - For Intermediate Brewers
KB07297 ~ Glycol Twister Pressure Brewing Kit - Glycol Obsessed*(We recommend fermentation fridges/chambers over glycol chilled)

If you want to fit a thermowell to the lid of this fermenter then you should really check out the Gen3 60cm Stainless Thermowell Kit that includes the bulkhead fitting so you can mount this into the lid of this Fermenter.
That way you can take a core reading and control your ferment with a RAPT Fermentation Controller or the MKII Temperature Controller.

What's new the difference between Gen2 and Gen3?
1. Moulded 3 inch tri clover ferrule in the body of the FermZilla tank
2. 3 inch Tri-Clover Butterfly Valve
3. 3 Inch Tri-Clover 600mL Collection Container

Is it easier to clean / take apart than the Gen2?

YES, It is by far the easiest Conical PET fermenter to disassemble and clean into all the nooks and crannies. Simply release all pressure inside the vessel and detatch the tri clover clamps.

What does the starter kit come with?
1 x 27L Conical FermZilla Tri-Conical Base Kit (unassembled)
      1 x 27L Gen3 Tri-Conical Tank with metal neck ring
      1 x Standard Top Lid, with Red PRV (35psi) [2 x Male PCO1881 Cap Threads] [Up to 4 drill ports for accessories]
      1 x Collar Lid Ring
      1 x Grommet PCO1881 Black Cap + 1 x Blank PCO1881 Black Cap for lid
      1 x Premium 3 Piece Airlock
      1 x 3 inch tri clover to 3 inch tri clover Butterfly Valve
      1 x 600mL Collection Container & Lid* [2 x Male Cap Threads]
      2 x Blank PCO1881 Black Cap
      1 x 3 piece ~ 3 inch tri clover clamp [+ 1 x 3" Beaded Silicone Seal]
      1 x 2 piece ~ 2 inch tri clover clamp [+ 1 x 2" Beaded Silicone Seal]
      1 x Stainless Stand with swing handles
      1 x Stainless Steel Handle Assembly
      1 x Strip Stick On Thermometer
      1 x Level indicator sticker (Litres and Gallons)
      1 x Spare Lid O-Ring
      1 x Spare Collection Container O-Ring

Instructions:
To download the instruction sheet for this product click on the link below:
FermZilla 27L - Tri-Conical PDF Instruction Manual

Warnings:
Please read the instructions thoroughly before use. We will not be held liable for misuse or mishandling of the unit contrary to the instructions.
Keeping the units out of direct sunlight is a must for all PET fermenters. Sunlight degrades PET. 
Do not expose to temperatures exceeding 35°C and pressure ferment past 5psi at these temperatures.

Please note:
When using this vessel under pressure. You must perform a water pressure check to ensure your connections are leak proof before you fill the fermenter every time. To do this. Fill your FermZilla up with some water, then apply a minimum of 15psi pressure to the vessel. Check for leaks around all Cap / Threads by tipping it upside down, in all directions where there are risks of leakage. 

Occasionally these units may come with some small indentations/dimples/dents from shipping, this is just a reality of shipping large blow-moulded thin-walled vessels. But don't panic, these fermenters are designed to endure minor deformations such as this. This was a necessary implementation into the design so that they can withstand some accidental suction from cold crashing and rough handling in transit without compromising their integrity and ability to endure high pressures. All small dents will push out and settle with use and positive pressure and are only an issue and warrant replacement in the rare event they start to show white stress patterns or have damaged the plastic.

This copper condenser is designed to remove all flavour and impurities from a sugar wash, making it the perfect base for Still Spirits' spirit and liqueur essences.
Includes:

• Prepacked Copper Column
• PVC and PE Tubes
• Digital Thermometer
• Distilling Conditioner (Ingredients: water, silicone antifoam)
• Ceramic Boil Enhancers
• Water Flow Controller with kitchen, garden and laundry tap adaptors
• Instructions Booklet

The G40 or the G70 paired with the Distilling Lid and T500 Alembic Condenser Attachment Kit offers an all-in-one automated Brewing System that can also be used to for pot distillation, making it the ultimate combo to brew high quality beer and distill whiskey, bourbon, rum, and more.
Features

• 304 Grade Stainless Steel Construction
• Copper Helmet to Aid in Reduction of Sulphur Compounds and Retention and Development of Flavour

What's Included:

• 4” Tri-Clamp
• 4” Tri-Clamp Seal
• 4” to 2” Copper Alembic Helmet
• 2” Tri-Clamp
• 2” Tri-Clamp Seal
• 2” to ½”(48mm) DN40 Thread Adapter
• Condenser Silicone O-Ring

Note: Distilling Lid sold separately.

Connect your boiler to condenser with confidence using the Pure Distilling Clip on Hose Fittings. This kit includes male brass fittings, silicone hose, and secure connectors, designed for seamless compatibility with Pure Distilling Reflux, Crystal, Crystal Dragon 4-inch, and Pot condensers.

High-grade silicone tubing prevents leaks and ensures reliable performance throughout your distillation process. The comprehensive kit provides everything needed for a quick, fuss-free setup - ideal for both first-time and experienced home distillers.

Built for durability and simplicity, these brass fittings deliver the quality and peace of mind your home distilling setup deserves.

Note: Home distilling regulations vary by region. Please verify local laws before beginning.

5 pack of small Filter Paper, 25mm in diameter for final filter process. Always ensure the paper lies flat across the base. Replace after each batch of spirit.

By Still Spirits

Dry Aromatic Bitter

Makes 750ml.

Made in Sweden

Samuel Willard’s Rum Soakers are so easy to use. Simply add around 20 grams to 1 litre of filtered alcohol and allow to steep for 5 days. We suggest that you experiment to suit your own taste requirements.

Classic 6 is specifically formulated to ferment 6 kg of sugar ( 7kg Dextrose ) across a wide temperature range of 18 to 30c, while still producing a clean tasting spirit and a low fermentation odour. It is always our very strong recommendation to use Turbo Clear and Turbo carbon with every Turbo yeast for the best quality distilled spirit.

Classic 6 is the best selling Turbo Yeast world-wide, performing excellently under most conditions. It reaches 18% ABV where 6kg of sugar is used and has excellent temperature tolerance. Classic has been further improved with the inclusion of new mineral absorbents, further improving distillate quality. We recommend you use Turbo Carbon as it will significantly improve the performance of Classic Turbo. 

All our yeast has a minimum expiry date of 6 months after purchase. If you keep the yeast refrigerated, it was last an extra year past the expiry date. 

Prestige Lime Vodka Flavouring creates a crisp grain‑based vodka with a fresh, zesty lime flavour. Enjoy it as a standalone spirit or mix it into your favourite drinks. It pairs beautifully with grapefruit, orange juice, or cola for bright, refreshing cocktails.

Each 50mL bottle of essence yields 2250mL of Samuel Willard's Premium Queensland Rum. This Rum is rich in both colour and flavour, and it is sure to please. A nice balance of Queensland sugar cane and caramel notes puts this on any bar's "must have" list.

This whisky‑style essence delivers a smooth, creamy profile with soft vanilla sweetness and gentle orchard fruit notes. Light malt and subtle oak round out the finish, creating a refined, well‑balanced spirit with a mellow, rounded character.