Spirits & Distillation

Pure Distilling Whisky Port Barrel Chunks 500g. Sourced from a mix of genuine port barrels from the same barrels being prepared to age quality Tasmanian whisky.

Recommended to soak for 6-8 days @ 38% ABV

These 304 Stainless 2200w Weld-Less Elements are designed to fit a 32mm Hole inside the wall of your brewing vessels or boilers. It does not come with the power cord.

Supplying power from an IEC cord allows the unit to be used in a smaller hole than if the cord was hard wired. We do recommend using a MKII - Temperature Controller (Heat & Cool) to run this element with the appropriate thermowell or temperature probe attachment.

If you are going to be using these elements directly in your mash tun, and will try to maintain temperature using the element, we would also recommend getting a power control chip 3600w to modify the power output to the element. Too higher power directly in contact with your malted grain can cause scorching/off flavours as the temperature may not be evenly distributed and isolated purely around the element itself.

Code: 127621

30W Fermenter Heating Belt easily wraps around any fermenter to help control temperatures in cold months.
Belt can simply be moved up and down the fermenter in order to control temperature.

Code: 127623

These flexible heat pads are manufactured from polyurethane to give water resistant properties combined with durability & flexibility. Will provide low heat for the purpose of brewing or fermenting.

Precision-engineered silicone gasket designed for 2-inch Triclover connections on keg boilers and brewing equipment. Features a flat ribbed surface on one side for optimal sealing performance and compatibility with standard Triclover fittings.

Durable food-grade silicone construction withstands high temperatures and repeated use. Essential component for maintaining leak-free connections in home brewing and commercial applications. Replace periodically to ensure reliable performance and prevent contamination.

Who needs a tropical fan kit?

• XL Premium Kegerator owners that live in hot climates
• XL Premium Kegerator owners that installed their kegerators where the heat can't escape easily
• XL Premium Kegerator owners that want better dispersion performance for the heat their kegerators are creating

Our new Tropical Fan Kit can greatly enhance the performance of your XL Premium kegerator especially for units running in hotter climates.

The small ducted fan installs between the bottom corner of the condensing unit and the outside back wall of the kegerator.

Connect the small power supply cable and that's it.

The fan will move heat trapped at the back of your kegerator, minimising operation of the refrigeration cycles.

Maximize your wash production with our Turbo Wash Production TAB 3 Package. This package includes 8kg of dextrose, carbon-alchotec yeast, and a clearing agent for optimal results. Boost efficiency and quality while saving time and effort with this all-inclusive package.

Comes with

• Alcotec 24 Turbo Klar
• Distilling Sugar - 8kg Dextrose blended with carbon ferment wash fining
• Alcotec 48 hr Turbo Yeast 

The Create+ Complete Companion Kit contains all the ingredients and equipment needed to make a wash, filter, and flavour neutral alcohol.

Ferment a pure sugar wash in just 7 days with Turbo ingredients, filter effortlessly with the Easy Filter System’s premium carbon technology, and flavour up to 7 L with a wide range of Top Shelf Select and Top Shelf flavourings. From classic to creative, explore flavours to suit every taste.

Features:

• • Ferments in approx. 7 days
• • High quality carbon filtration
• • Flavour up to 7 L

DISCLAIMER: Please note that in certain countries alcohol distillation and the possession of distilling equipment is illegal and permits/licenses may be required. For guidance or advice, contact your relevant local authorities.

What's Included:

• 6 kg Turbo Sugar
• Cold Water Cleaner Detergent
• No Rinse Sanitiser
• Hydrometer
• Alcometer
• Distilling Conditioner
• 2x Top Shelf Spirit Flavourings
• 1x Top Shelf Select Liqueur Flavouring
• 1x Top Shelf Select Spirit Flavouring
• 5 L Plastic Jug
• Turbo Pack (including Classic 6 Yeast, Carbon & Clear)
• 30 L Fermenter with airlock, grommet, tap, and thermometer strip
• Mixing spoon
• Easy Filter System

Specifications:

Fermentation Time:

• At 15°C (59°F): 9-10 days
• At 30°C (86°F): 4-5 days

Yield (approx.):

•  Using the T500: 3.6 L (0.95 US Gal) @ 93% ABV (186 Proof)

The distillery kit contains everything needed to make a wash ready for distillation. The high quality, Australian Made copper reflux Spirit Maker condenser is included to effortlessly deliver the best quality neutral spirit. 

The whole system is designed to save time, money and parts and comes in one box for easier storage.

*note - this does not come with a boiler*

So what comes with the system?

• Spirit Maker Condenser with high yield output tap
• Plastic Hose Connectors and 4m of 12,5mm clear vinyl tubing
• Smart Filter with stainless internals, clever Stainless plug and filter cartridge
• Premium Spirit Yeast, Crystal Clear, Spirit Enhancer & Distilling Conditioner
• 30l pail fermenter with a tap, grommet, airlock, 60cm stirring paddle and stick on thermometer
• Easyclean only for use with the plastic fermenter
• 5l Pourmaxx Measuring jug, distilling thermometer with alarm, hydrometer and alcometer
• Six Pure Distilling Essences
• 4l Chunk Soaking Pail with 100g samples of Bourbon Barrel Chunks and Whisky Port Barrel Chunks.
• Pure Distilling lid to use with the pot condenser

Spare Plastic lid for Plastic Fermenters with airlock and heater hole.

Suitable for 30 Lt and 60 Lt Plastic Fermenters

O-rings need to be purchased separately.

Please note that the colour of the item may vary from batch to batch, as the manufacturer may change it without notice.

• Sleek, 304-grade stainless steel build
• Includes a standard 4" tri-clamp connection that can be used to connect third-party distilling equipment
• Pressure relief valve for safer distilling
• Can be used as a steam condenser while brewing indoors (when paired with the appropriate equipment)

IMPORTANT NOTES:
The G40 & G70 Distilling Lid is designed primarily for small to medium-sized still heads that do not have heavy, off-centre attachments. The lid is reasonably flexible and is sturdy enough to fit a still head that is within the following specifications:

• A still head height up to 1.1 m (3.6 ft) from the lid.
• A still head weight up to 11 kg (24 lbs), including up to 2 kg (4.4 lbs) of off-centre weight from a swan neck, lyne arm, or
• Condenser running in parallel with the column and offset up to 160 mm (6”) to the main column.
  We recommend external support if:

Your still exceeds the above specifications.
The lyne arm is not vertical but angled or perpendicular running away from the column, resulting in significantly distant off-centre weight.
If the main still head (column) is noticeably leaning.

Pure Distilling’s submersible pump is designed to circulate cold water through your still’s condenser efficiently. It delivers a flow rate of up to 3000L per hour, ensuring optimal cooling performance.

The Create+ Beeping Alarm Thermometer allows your cstomer to set a high and a low temperature on the thermometer of their Create+ T500 Column & Condenser or Create+ Alembic Condenser. The thermometer will beep to notify them that the high or low temperature has been reached so they can make adjustments to their waterflow or distillation as required.

Product Features:

• Ø5 mm Probe
• High & low temperature alarms
• Celsius & Fahrenheit setting

Compatible with:

•  Create + T500 Column & Condenser
• Alembic Copper Condenser
• 2" Straight Tubes

DISCLAIMER: Please note that in certain countries alcohol distillation and the possession of distilling equipment is illegal and permits/licenses may be required. For guidance or advice, contact your relevant local authorities.

What's Included:

• Create+ Beeping Alarm Thermometer
• 2" Mounting Bracket
• AAA Battery
• Instructions

Specifications

• Display Resolution: 0.1℃ / 0.1°F
• Alarm Resolution: 1℃ / 1°F
• Measuring Range: -50~300℃(-58~572°F)
• Display Accuracy: ±1℃/°F

The Output Cooler cools the spirit as it exits the Reflux Condenser. 

Why upgrade?

• It heavily reduces evaporation loss, netting us an extra ~200ml of 93% spirit during testing runs.
• Instant alcometer readings, no temperature corrections required

It’s ideal to use If you would like the flavour of your wash to come through.

If you are an Artisan’s that likes make spirits using grains, fruit and much more. This is the right tool to assist you in achieving your projects easy, fast and efficient.

Some of the features of this Pure distilling Pot Copper Condenser are:
    • Fast – 4.5L/hr with alcohol or 2.8L/hr with water
    • With an all copper construction for smoothness of taste
    • It comes with a digital thermometer and is simple to use.
    • Just switch it on and collect your alcohol – it couldn’t be sim
    • Made in Australia

The new version comes with:

• Digital thermometer
• Specialty Rum & Whiskey yeasts
• 2 x 100g sample Barrel Chunks
• Instructions and mounting hardware

A 2 inch sightglass extension kit that lifts your pot or reflux condenser with a quality copper extension, fitting neatly onto the boiler lid. As well as adding height, it lets you run the reflux gin basket in your pot condenser for larger gin batches. Practical, good looking, and a favourite on the gift shelf.

A 2400 watt power controller (Gen2) that lets you dial your element up and down for precise heat control on your brewing or distilling rig. Fine tune your boil, hold a gentle simmer, or run a controlled still, all from one sturdy 240V unit. A powerful upgrade for anyone who wants full command of the heat.

Power cord for 2200W heating rod element. Rated for 240v.

If you own a PC you will know that this is one of those power cords. A must have to power your 2200w Weldless KegLand Element.

Heating Element Power Cord (IEC Cord)
Power Cord for the 2200watt heating element.  AU Plug to IEC (3 Pin) Female