Spirits & Distillation

Essential brewing equipment for serious home brewers and craft operations. This 90cm mixing paddle features a generous 40cm x 8cm flat face, engineered to move large volumes of liquid efficiently during mashing, lautering, and kettle work.

The bored design reduces drag and resistance, making stirring smoother and less labour-intensive. Constructed for durability in high-heat environments, it's ideal for all-grain brewing setups and commercial-scale batches. 

The inner glass tube for the immersible heater. It is the sleeve the heating element sits inside, and a cracked tube means the heater should not go anywhere near your wort until it has been replaced.

Sold as a replacement accessory. Check the length and diameter against your heater before ordering, and send us a photo if you would like us to confirm the match.

This 240v motor has been coupled with a high torque gearbox to bring the RPM down to the perfect milling speed of 180rpm. 

Includes spider coupling with polyurethane cushion to suit 10mm and 12mm shafts as well as a safety kill switch.

Note: Grain mill and hopper NOT included.

New stainless steel 50L keg with predrilled hole for electric boiler element. Perfect for use with the Keggomax FM Reflux attachment.

Keg Boiler 50lt with provision for heating element siutable to use with keggom condensor.

A spare stainless steel lid with a 52mm hole, made for Alcoengine condensers and 25 to 35 litre boilers. Handy if your original has been knocked about, or if you want a second lid set up ready to go rather than swapping one back and forth.

Confirm your boiler falls in the 25 to 35 litre range and that the 52mm hole matches your condenser before ordering.

Spare S/Steel lid ( with 47mm hole ) for Alcoengine condenser and boilers 65 Lt. This lid will fit your Grainfather or Robobrew and allow you to attach the AlcoEngine Pot Still. This lid will also fit a standard Turbo Boiler.

Made from 304 grade stainless steel this large size lid will take your distillation runs to the next level.

Also fits: Fits the Digiboil, or BrewZilla boilers.

A 2200 watt electric heating element rod from Keg King, supplied with its power cord. Sold as a replacement or spare for a setup already built to take an element of this size, so nothing else comes in the box. Confirm the element style and mounting your vessel uses before ordering, and give us a call if you want a second set of eyes on it.

A 2200W heating element rod with cable, from Kegland. A straight replacement part for a vessel already set up to take an element of this rating, sold on its own. Check the rating and fitting on your existing element before you order, and bring the old one in if you would rather we compare the two side by side.

Replacement plastic tap for the original Still Spirits T500 Boiler. Features a black push valve design. Not compatible with newer ball valve tap models. Direct fit for classic T500 boiler systems.

The Grainfather 40 litre sparge water boiler, running on 240v at 10A so it plugs into an ordinary household outlet. It heats and holds your sparge water so it is ready the moment the mash is, which takes one job off an already busy brew day. Check you have a spare 10A outlet within reach of your bench, or come and see one at Epping.

A 300 watt immersible glass heater by EHEIM of Germany, for precise fermentation temperature control. German build quality means reliable, even heat to keep your ferment in the sweet spot for clean, consistent results. A quality choice for the brewer who takes temperature seriously.

The replacement carbon cartridge for your Pure Distilling Smell Eliminator. Each one keeps the fermentation odours at bay for around 5 washes or brews, then you simply swap it out for a fresh one. An easy way to keep the peace when you are brewing indoors.

Perfect heating solution for those who want more even coverage and absolute certainty that their PET fermenter will not melt even if the fermenter is empty.

FermZilla Heating Wrap Belt - With Velcro Strap (30watts)

Perfect heating solution for those who want more even coverage and absolute certainty that their PET fermenter will not melt even if the fermenter is empty.

Punching in at an ample 30 watts, this heating wrap belt is great when paired with insulation and a temperature controller box to dial in that optimum fermentation profile.

Dimensions:
1000mm x 250mm

AU Plug

Fresh packing mesh to bring your reflux condenser back to its best. Each piece is weighed to 30 grams and pre stretched for even density, so the column packs the way it should for clean, high quality cuts. A quick refresh that makes a real difference to your spirit.

Includes everything from the Distillery Kit & Distillery Upgrade Kit + a Pure Distilling Pot Condenser

The Deluxe Distillery Kit contains everything you need to make a wash ready for distillation, the high quality, Australian Made copper Reflux Condenser and a Pot Condenser are included to effortlessly deliver the best quality neutral spirit and allow you to create traditional grain based spirits, fruit brandies and rum.

The distillery kit contains everything needed to make a wash ready for distillation and more! The high quality, Australian Made Reflux Condenser is included to effortlessly deliver the best quality neutral spirit. The Reflux Condenser is covered by a 5-year guarantee!

Easy Operation

From the moment you remove the Reflux Condenser from the box, you will realise how easy everything is. That’s because we have done all the complicated stuff for you.  All units are fully assembled in our factory, then robotically tested to ensure you get the quality and yield you are expecting first time, every time.

A liquid management reflux condenser is not influenced by changes in temperature of the cooling water, nor is it impacted by water pressure. Liquid management technology doesn’t care. It simply delivers the same product quality over and over.

Set the water flow once, and simply check ONE thermometer to see when the process is complete.

Features

• 93% alcohol and 97% yield
• Fast — Makes 13 bottles in about 4 hours.
• Pure — Delivers great tasting 93% alcohol with smooth flavour.
• Easy — Works straight out of the box. Automatic temperature control – virtually runs itself.
• Fits a lid with a 60cm diameter hole.

Excellent Quality
This is a commercial quality reflux distillation unit. It will produce spirit better than that which you buy at the bottle shop – guaranteed.

The beauty of copper
Not just elegant to look at copper provides a smoother taste by removing strong smelling sulphides. Major distilleries use copper for this reason.

Guaranteed Easy
It is very easy to use, comes with FULL instructions and everything you need to get started.

5 Year Warranty
Problems? No problem!  If anything goes wrong in the first 5 years of use (it shouldn’t – they are designed to last a lifetime), we will fix or replace it for you on the spot.
How can we offer such a long warranty?  Simply put – quality.  We use only solid copper and brass, have no breakable plastic parts, and an elegant design.

Australian Owned and Manufactured
All our condensers are 100% Australian made, and our company is 100% Australian owned.

Includes

• Pure Distilling Reflux Condenser
• Pure Distilling Pot Condenser with thermometer
• Pure Distilling Boiler Lid. Fits any boiler with a 310mm – 312mm diameter (such as the T500 boiler).
• Plastic Hose Connectors and 4m of 12.5mm clear vinyl tubing
• Smart Filter with stainless internals, clever Stainless plug and filter cartridge
• Premium Spirit Yeast, Crystal Clear, Spirit Enhancer & Distilling Conditioner
• 30l pail fermenter with tap, grommet, airlock, 60cm stirring paddle and stick on thermometer
• Easyclean only for use with the plastic fermenter
• 5l Pourmaxx Measuring jug, distilling thermometer with alarm, hydrometer and alcometer
• Six Pure Distilling Essences
• 4l Chunk Soaking Pail with 100g samples of Bourbon Barrel Chunks and Whisky Port Barrel Chunks.

This kit does not include a boiler, which can be purchased separately.

A replacement lid for the 30 litre heated fermenter. Lids crack, warp or simply disappear, and a fermenter without one is not much use to anybody.

This is the 30 litre heated fermenter lid. Check the diameter and the fitting on your vessel before ordering, since two fermenters of the same nominal volume are not always the same shape. Send us a photo and we will confirm.

All-Rounder Includes:
1 x All rounder tank
1 x 304 stainless stand
1 x Airlock
1 x Pressure rated lid
1 x Digital temperature sticker

The FermZilla 30L All Rounder is the perfect fermentation vessel that can be used for fermenting under pressure, carbonating and dispensing.

Easy to Clean
This fermenter is made from super smooth PET so it's easy to clean.  Just use s small scoop of Powerful Brewery Wash and wipe it clean after a 5 minute soak.  No scrubbing necessary.

Pressure Rated
This fermenter is rated up to 2.5bar so you can force carbonate just like a keg.  You can use this fermenter for closed transfers and signficiantly reduce oxygen exposure.

Crystal Clear
The wall of the All Rounder is crystal clear so you can see what's going on inside.  This makes it really easy to determine visually how the fermentation, how the yeast is floculating etc.

A spare o-ring for the 5 litre copper bar still. Seals take a beating from heat and repeated assembly, and a tired one will let vapour past where you want it held.

Cheap enough to keep a spare in the drawer rather than losing a run to it. Confirm your still is the 5 litre copper bar model before ordering, since o-rings are sized to the vessel.