Kegmenter Hopbong Pressure Lid 5pc Package TC 4.0inch
Kegmenter Hopbong Pressure Lid 5pc Package TC 4.0inch
Kegmenter Hopbong Pressure Lid 5pc Package TC 4.0inch
Kegmenter Hopbong Pressure Lid 5pc Package TC 4.0inch
Kegmenter Hopbong Pressure Lid 5pc Package TC 4.0inch

Kegland

Kegmenter Hopbong Pressure Lid 5pc Package TC 4.0inch

SKU: PK05-134820BONGKIT
$42.90 AUD $53.90 AUD
-20%
Out of stock

This product will be available for sale in 2 weeks, but you can pre-order now to receive 10% discount!

Shipping Information

Kegmenter Hopbong Pressure Lid 5pc Package TC 4.0inch
$42.90 AUD $53.90 AUD
$42.90 AUD $53.90 AUD

2 Inch TC Clamp - 2 Segments:

Made from 304 stainless steel and compatible with wide range of other standard 2inch tri-clover fittings.

This is a standard 2inch tri-clover clamps. They are commonly used in brewery hardware and are compatible with our Alcoengine Pot Stills and Reflux Stills and will allow you to connect these stills to keg boilers.

They are often used on brewery hardware larger than 100L in size.

2 Inch TC Beaded Seal - Silicone:

This silicone beaded seal is 2" is suited to sanitary tri-clover clamp connections. The seal itself can come in a wide range of colours (chosen at random based on supply at the time.)

Colours can include: White, Black, Brown, Transparent, or Semi Transparent White and Blue. Temperature Range: -54°C to 200°C

Cornelius Type Pressure Relief Valve (PRV) (RED 35psi / 2.5BAR):

These pressure relief valves are made to the cornelius standard and are compatible with cornelius type kegs. These are accurately made and batch tested for consistency.

This important safety mechanism has been manufactured to tight specifications to ensure it's reliability.
Please be aware that these pressure relief valves should be clean to work correctly.  If dried up beer or sugar gets into the pressure relief valve then clean this out immediately as this can effect the safe working and opening pressures.

A replacement pull-ring style relief valve for your Corny Keg but they are compatible with other products such as the MK4 Regulator and Kegmenter lids.
This is the most common relief valve on all ball lock kegs. If you do have a lever tab second hand ball lock keg, you can switch it out with one of these.
All of KegLand Brand New Kegs come with a ring pull PRV like this.

We supply 3 different pressure relief valve types that differer in opening pressure:
RED - 35psi (2.5Bar)
GREE - 65psi (4.5Bar)
GREY - 100psi (6.9Bar)

Max. pressure rating: 35psi
NOTE: This is a safety device designed to release pressure at the approximate rated pressure.  THIS IS NOT TO BE USED AS SPUNDING VALVE.  The pressure rating on these is approximate with tolerance of +/- 10psi.  If you need accurate pressure control to hold residual pressure in a pressure fermenter or pressure vessel we would recommend using the BlowTie  or alternatively you can get the whole BlowTie Kit.

PCO1881 Male x 2 Inch TC (POK):

For all you hop bongers out there. We have an end cap for all end caps! The Polyketone 2 Inch Tri-Clover x PCO1881 Male Thread (PET drink bottle thread like a Schweppes / Coca Cola bottle)

4 Inch TC Pressure Lid with 2 Inch TC Port:

Get a better RAPT Pill WiFi reading with the all new Kegmenter Lid from KegLand. Suits any standard 4 Inch Tri-Clover Ferrule.

Reinforced Industrial Plastic 4 Inch TC pressure lid with 2 Inch TC port. Suits a 35psi RED Pressure relief valve and two carbonation caps. You can also fit a temp twister and 600mm thermowell probe into it.

Due to the large 4 Inch Tri-Clover diameter, it is difficult to get higher pressures without leaking. Therefore we suggest using this up to 1.5 BAR (21psi)
This should only be used with a Red 35psi PRV (Pressure Relief Valve) or the Yellow 17psi PRV

Recently viewed products

Clear history