Smoke Generator Kit – Cold Smoker KL with air pump

Description

Tested and designed to smoke up to 12 hours with Lumber Jack Competition Grade Pellets*.
*Smoking time is also dependent on the wood fuel type (chip, pellets), variety (hickory, maple, etc) and the ambient atmosphere. We recommend using pellets for consistent repeatability and weighing them out before hand.

Our pump is suited to run low and slow much like your favourite bbq meats!

Mount the smoker to your chamber then simply follow the steps below.

STEP 1: Remove the stainless steel cap and fill the smoke generator with smoking pellets.
STEP 2: Plug the pump into mains power and use a jet lighter to ignite the pellets through the hole in both sides of the smoker.
STEP 3: Sit back and watch the smoking process.

Features:
– 20mm OD Outlet.
– Constructed from Heavy Duty 304 Stainless Steel.
– Seamless mounting, assembly, disassembly, ash disposal and cleaning super quick and easy.
– 1L Hopper that holds your pellets and  provides clean smoke for up to 12 hours when fully loaded.
– Low and Slow air pump with black silicone hose (1000mm) for optimum smoking results.
– Sturdy Stainless Steel Lid (open with care when hot)
– Sturdy base alows the cold smoking unit to be mounted resting on the ground or shelf.  Just line up the smoke outlet with the hole in your smoking chamber and you are off and smoking.
– Alternatively using the mounting bracket to affix to your smoking chamber, vessel, fridge etc.