Description
The mixer frame comes with 4 pre-drilled holes to assist unit being mounted to our optional base workstation, trolley or a solid block of timber etc. Being able to tip the tub 90 degrees level to the table surface makes it much easier to clean and free rinse sanitise. Simply flush with hot water and degreasing powder and tip into the low-level plastic crate.
Specifications:
-
- 10 – 20kg Capacity
-
- 40cm x 28cm x 35cm Dimensions
-
- Manual operation
-
- Stainless Steel
-
- Paddles thickness 5 mm
Keep in mind that you can purchase additional accessories for your mixer. The Driveshaft, Motor and Bench frame featuring are sold separately.
-
- Base workstation frame (Made in Australia)
Designed with 3 sets of pre-welded thread nuts to locate and mount the Italian Fabio Leonardi 1.0 – 1.5 HP gearbox motors (MR9, MR7 or MR6) with 4 simples/steel bolts. Depending on the motor model some extra holes will need to be the drill. Our suggestion only would be the more hygienic MR7 motor cover unit to installs with least effort.
- Base workstation frame (Made in Australia)
-
- Connecting drive shaft and motor drive bush
Suitable for only the FLB- gear box design ( Featuring a chromed mild steel shaft connecting with the FLB metal male drive gear)The shaft could be welded to suit other motor types, but without a suitable drive bush would not make it cost effective to product just 1 customised bush. In this case, we consider you purchase the MR7 motor. Alternatively, as cheaper to purchase with the TC mincer 22, sell your old mincer and get this combined dry grease gear box motor which is quiet, powerful and with much more attachments that will last you many years to come.
- Connecting drive shaft and motor drive bush
-
- Connecting your motor with an inline control start/stop pedal 10A single phase
A reasonable solution to provide more safety with this operation, where by if someone gets curious to open the lid during operation (Definitely avoid and warn all operators not to do!) then you can quickly remove your foot off the pedal in a second to stop the moving auger causing any harm to others. (Its also a handy controller to have, if you choose to use your electric mincer and simple funnel as a sausage casing filler!) much more control than fumbling for the power switch before casings burst!!! (YES, just buy a piston filler !)
- Connecting your motor with an inline control start/stop pedal 10A single phase